LÖTA

Lower ball joint socket for Peugeot/Citroen, 210-0215-60

Features:
Suitable for removal of OEM and after market lower ball joints on Peugeot and Citroen.
Profile: 60mm x 38 mm
Length: 45 mm

Made in Taiwan

1/2" Dr. Dr. Profession Bent Ratchet Handle 72T, 317-A4026

72 teeth

Material: Cr-V

Made in Taiwan

Coil spring compressor 5/8" - 10 Square thread, 741-0107A

Tempered Chrome-molybdenum steel jaws with ACME threaded lead screw quickly & safely compress coil springs on all passenger cars & pick up trucks.
Size: 300 mm

Made in Taiwan

4 pcs Stud extractor socket set, 058-1022M
The extractors are the concentric roller bearing type that won't damage the thread on the stud.
They can used for stud removal and stud fitting with no damage to the thread.
Very professional.
Made from highly polished chrome vanadium steel to a professional standard for the skilled mechanic or engineer.
Sizes: 6 mm; 8 mm; 10 mm; 12 mm

Made in Taiwan

Coil spring compressor 5/8" - 11 UNC, 741-0107

Tempered Chrome-molybdenum steel jaws with ACME threaded lead screw quickly & safely compress coil springs on all passenger cars & pick up trucks.
Lenght: 300 mm

Made in Taiwan

Universal ball joint separator 22 mm, 211-0163

This tool is used to separate the ball joint from the spindle support arm

Applicable:  Audi, BMW, Ford, Honda, Mercedes-Benz, Nissan, Opel, Renault, Seat, Skoda, Toyota, Volkswagen and Volvo.
Adjustable for Different Size Ball Joints
1-1/8" & 2-1/8" (30 - 56 mm) Maximum Opening Capacity
Lifetime limited warranty

Internal snap ring pliers (Long arm), 096-7011

Special design for the retaining ring in the deep hole.
The most deep size: 56 mm

Made in Taiwan

11" Oil Filter Locking Ppliers (bent) 280 mm, 114-51245B

Made in Taiwan

Crankshaft pulley holding tool BMW 3/5 Series, 846-8083А

Features:
Holds vibration damper when loosening or tightening centre crankshaft bolt.
Applicable: BMW 3 series E46 (1998 - 2007), 5 series E39 (1996 - 2003)
BMW E81 120d 163PS
BMW E46 318d 116PS - 318td 115PS - 318dt 115PS - 318d, 115PS - 320d 136PS - 320td 150PS - 320d 150PS
BMW E90 318d 150PS - 320d 150PS - 320d 163PS
BMW E91 318d 122PS - 320d 150PS - 320d 163PS
BMW E39 520d 136PS
BMW E60 520d 163PS - 520d 150PS
BMW E61 520d 150PS - 520d 163PS
BMW X3 E83 2.0d 150PS
OEM No. 11 6 310 (11 6 311 holder, 11 6 312 centring tube)
Centering tube OD: 60mm, ID: 49mm

Made in Taiwan

Mercedes Benz /BMW Oil pan wrench, 846-7157

A wrench designed specifically to service the driveline fluids on most BMW and Mercedes Benz vehicles.
The 14-mm Allen end services the fill and drain plugs on the transmission and differential housing. The low-profile design allows access where restricted space does not allow the use of a conventional socket. The 17-mm box end services the oil drain plug.

BMW: Most vehicles since 1990
Mercedes Benz engine types: 102.92/93/96/98/99, 103, 104, 110.92/98/99, 112, 113, 116, 117, 119, 120, 266, 275, 285, 601, 602.91/93/94/96, 603.91/93/96/97, 604, 605, 606, 615, 616, 617.91 /95
Mercedes transmission types: 716, 717, 722, 63

Made in Taiwan

VW/Audi Spark plug electric wire remover, 04029035

The tool is designed to separate the electric wire from spark plug.
Application: Volkswagen and Audi

Made in Taiwan

14mm 3/8"Dr. 12-pt. Spark plug socket, 0402534101

Thin-Wall Socket with 3/8”Dr.
Overall Length is 50.8mm (2-1/2”)
Heavy-Duty Construction Ensures Durability
Applicable:
BMW: E90 N 54 Engine 335 i Lim. From Bj. 2006
RENAULT: Twingo, Clio, Kangoo 1.2 l 16V engine
PEUGEOT: 207, 307
CITROËN: C4 with 1.4 and 1.6 liter 16V engine, with 2.0L C5 HPi engine
MERCEDES-BENZ: Motor M 156, M 276 engine, Nissan Micra, Note, MINI from 1.2 to 1.4L 4-cyl. from Bj. 2007

Made in Taiwan

Mercedes Benz compressor belt pulley, 01125039

Special tool for using on removing / installing compressor belt.
With Special three point design for suitable using on parts of the vehicles.
Applicable: BENZ M112, M113, M272M, M273.

Made in Taiwan

VAG 1.2/1.6 TDi и 2.0L TDI engines - Diesel injector remover, 011108019A

Applicable:
Volkswagen Golf 2009, Seat Ibiza 2008, Altera 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013.
Engines: 1.2L TDi CR 55Kw Diesel, 1.6L CRTD Diesel and 2.0LTDI Diesel.
OEM tools: T10402, T10415, T10055.
Use according to OEM instructions.
No solenoid removal is required.

Made in Taiwan

Cylinder liner extractor tool set, 031-A689

Cylinder liner puller complete with support brace.
Applicable: Wet heavy-vehicle (e.g. Mercedes Benz, MAN) cylinder liners, automobile and stationary-engine liners, and other parts may be extracted using this puller.
Capasity: Ø 60 – 160
Operation: the spindle of the counter-support brace is screwed into the clamping nut of the puller, and the puller inserted into the liner. The counter-support brace is placed on to the cylinder block. Due to the newly-developed spreading system, when the spindle is turned, all three jaws spread quickly and without difficulty, until they are firmly seated beneath the edge of the liner. Then the nut of the counter-support brace is tightened.

Made in Taiwan