LÖTA

Hose remover plier 25mm with wrench, 03M00205W

For easy removal hose fuel and vacuum system
Working part: 25 mm
Key size: 8 x 10 mm
Hose dimensions: 4 - 12.5 mm (5/32 "- 1/2")

Made in: Taiwan

VW, AUDI Head bolt socket, 846-7107

Features:
- 125 mm Overal length for restricted areas
- S2 10 mm Polydrive 6-pt. bits (RIBE 10 mm)
- 1/2"Dr. Cr-V Socket
- Not for impact use.

Applicable: Fits 1998 and later VW/Audi 5 Valve engines (V-6 and 4 cylinder)

Made in Taiwan

36 mm Viscous fan hub spanner, 058-6227A

Features:
For disassembly of FORD and GM (Opel / Vauxhall) viscous hub fins.
Cranked design for easy access.
Made of pressed, tempered, hardened and chromed steel with PVC handle.

• Size: 36mm.
• Lengh: 270 mm

Applicable:
Ford Granada 2.4 & 2.9; GM Carlton, Manta & Senator

Made in Taiwan

32 mm Viscous fan hub spanner, 058-6227

Features: For removal of thermo, viscous fan hubs. Cranked for easy access. Made of pressed, tempered, hardened and chromed steel with PVC handle.

• Size: 32 mm.
• Lengh: 270 mm

Applicalle:  
BMW: 316, 520i, 525i, 530i, 535i, 730i, 735i.
Ford: Capri, Sierra, Granada 2.0 & 2.8. Ford transit 2.0 1986-90 (with viscous fan) LCX 2.0, LCT 2.0, 2.5 Diesel 1980-90,LCX 2.5D & LCY 2.5D.

Made in Taiwan

41mm Viscous fan hub spanner, 058-62265

Applicalle:  For moving the water-pump in Opel, GM & Vauxhall in order to span the drive belt in  OHC - engines.
Made of pressed, tempered, hardened and chromed steel with PVC handle.

VW, AUDI Camshaft locking tool (4.2), 058-625000

Features: For engine synchronizationVW/Audi engines 2.5L I5 (BGP, BGQ, BPR, BPS, CBTA & CBUA),

3.2l [V6](4v)(BKH),4.2L[V8](4V)(BAR,BNS,BVJ, BYH & CAUA) & 5.2L (V10)(4v)(BXA & BSM).

Applicable: (20005-2008),A4 Avand (2005-2008),A4 Cabriolet(2007-2009),A6(2005-2009),A6 Avant (2006),A8(2007-2009),A8 L (2007-2009),Q7(2007-2009),R8(2008-2009), RS4(2007-2008),S5(2008-2009),S6(2007-2009)& S8(2007-2009) VW JETTA (2005-2012),

JETTA SPORTSWAGEN (2008-2009), BEETLE (2006-2010), BEETLE CONV. (2006-2010),

RABBIT(2006-2009) & TOUAREG (2007-2009)
No.to OEM #T40070

Made in Taiwan

Camshaft alignment tool -BMW N47, N47S, N57 - Diesel engines, 011262439A

Designed for the locking/positioning of camshafts and crankshaft.
Suitable for the 1.6, 2.0 or 3.0 l BMW engine such as BMW 1 Series, 3 Series, 5 Series, 7 Series, X1, X3, X5, X6; Mini Clubman, Countryman, Cooper D, Cooper SD, One D.
Engine codes: N47, N47-C16K1, N47-C16U1, N47-C20K1, N47-C20U1, N47-D20A, N47-D20C, N47-D20D, N47-D20K0, N47-D20K1, N47-D20O0, N47-D20O1, N47-D20U0, N47-D20U1, N47S-D20B, N47S-D20D, N47S-D20T0, N47T-D20K1, N47T-D20O1, N47T-D20U1, N57-D30A, N57-D30A0, N57-D30O0, N57-D30O1, N57-D30T0, N57-D30U0
OEM Ref: 115320,118760,116480,118741,118742,113340

Made in Taiwan

7,5 l Transmission oil filling system with 8 pcs adaptors set, 027-0601

Capacity: 7.5l
Large transparent tank to see through fluid level.
Viscosity range: up to SAE 140
Application: VW, Audi, Mini cooper, BMW, Ford, Nissan, Porsche, Mercedes, etc.

Made in Taiwan

410 mm Tie rod spreader, 113-0416

Separation and removal of ball joints

Corrosion-resistant black phosphate finish for durability

Material: Cr-V

Lenght: 410 mm

Inner width: 18 mm

Made in Taiwan

300 mm Tie rod spreader, 113-0412

Fill Plug Socket - T55 Inside TORX - 17 mm Drive, 04A101755

Size: T55 x 17 mm
Saves time when checking, replacing and adding transmission fluid.
It makes it easier to remove and install the plug.

Code: 505135

Made in Taiwan

BMW Crankshaft pulley holder (N47) , 780-8376
Used for dismantling and replacing the damper disc on BMW N47; N57.
For fixing  the crankshaft pulley when loosening or tightening the center pulley bolt.

11 7 221 - Bracket
11 7 222 - Handle: M8 for N47 / N57
11 7 223 - Screw: M8 for N47 / N57
11 7 224 - Handle: M10 for N47TU / N57TU
11 7 225 - Screw: M10 for N47TU / N57TU
11 6 480 - Crankshaft Rotor Tool
Application: BMW: 325,330,335,525,530,535,730

Made in Taiwan

6" Strap Oil Filter Wrench, 211-0611

Professional strap wrench featuring a heavy-duty 50mm wide nylon webbing, designed to effortlessly remove or install oil filters up to 150mm in diameter using a 1/2" square drive tool.

Made in Taiwan

Oil filter wrench, 096-3102A

Working range: 63 - 102 mm

Working with ratchet handle 3/8" DR. and 1/2" DR.

Made in Taiwan

Oil filter wrench, 209-0036

Working range: 63-102мм ( 2-1/2"-4") 

Working with ratchet handle 3/8" DR. and 1/2" DR.

Made in Taiwan