LÖTA

7,5 l Transmission oil filling system with 8 pcs adaptors set, 027-0601

Capacity: 7.5l
Large transparent tank to see through fluid level.
Viscosity range: up to SAE 140
Application: VW, Audi, Mini cooper, BMW, Ford, Nissan, Porsche, Mercedes, etc.

Made in Taiwan

410 mm Tie rod spreader, 113-0416

Separation and removal of ball joints

Corrosion-resistant black phosphate finish for durability

Material: Cr-V

Lenght: 410 mm

Inner width: 18 mm

Made in Taiwan

300 mm Tie rod spreader, 113-0412

Fill Plug Socket - T55 Inside TORX - 17 mm Drive, 04A101755

Size: T55 x 17 mm
Saves time when checking, replacing and adding transmission fluid.
It makes it easier to remove and install the plug.

Code: 505135

Made in Taiwan

BMW Crankshaft pulley holder (N47) , 780-8376
Used for dismantling and replacing the damper disc on BMW N47; N57.
For fixing  the crankshaft pulley when loosening or tightening the center pulley bolt.

11 7 221 - Bracket
11 7 222 - Handle: M8 for N47 / N57
11 7 223 - Screw: M8 for N47 / N57
11 7 224 - Handle: M10 for N47TU / N57TU
11 7 225 - Screw: M10 for N47TU / N57TU
11 6 480 - Crankshaft Rotor Tool
Application: BMW: 325,330,335,525,530,535,730

Made in Taiwan

6" Strap Oil Filter Wrench, 211-0611
Range: Up to 6" (150 mm)
Use with 1/2"Dr. Ratchet
Strong nylon belt will not slip

Oil filter wrench, 096-3102A

Working range: 63 - 102 mm

Working with ratchet handle 3/8" DR. and 1/2" DR.

Made in Taiwan

Oil filter wrench, 209-0036

Working range: 63-102мм ( 2-1/2"-4") 

Working with ratchet handle 3/8" DR. and 1/2" DR.

Made in Taiwan

Timing Belt Change Engine Tool Set for Fiat, Ford, Lancia 1.2 & 1.4 8V, 780-8141

Features:
For locking the camshaft and crankshaft in place while you change the timing belt and perform other repairs on Fiat engines.
Kit consists of crankshaft locking tool, camshaft setting plate and belt tensioner adjuster for the 1.2 engine, and additional sprocket locking tool and alignment fixture for the camshaft on the 1.4 VVT engine.

Applicable:
Facilitates changing of the timing belt and allows checking of the engine timing on following cars:
- Fiat: 500 (07-12), Doblo/Cargo (05-10),Grande Punto (07-12), Idea (04-12), Linea (07-11), Panda EVO2, Punto EVO (09-12).
- Lancia: Ypsilon (06-11), Musa (05-12).
- Ford: Ka (09-12).
Fits following engines mdodels:
- Fiat: 1.2/1.2 Dualogic, 169A4.000,188A4.000 (EVO2), 199A4.000 1.4/1.4 Bi-Fuel LPG / 1.4 Natural Power CNG,199A7.000, 350A1.000.
- Lancia: 1.4/1.4 Bi-Fuel LPG, 350A1.000.
- Ford: 1.2 Duratec, 169A4.000 (FP4).
Includes following tools:
- Crankshaft Locking Tool
  to be used as OEM 2.000.004.500 on Fiat/Lancia and OEM 303-1480 on Ford.
- Camshaft Setting Tool
 to be used as OEM 2.000.004.400 on Fiat/Lancia and OEM 303-1479 on Ford.
- Camshaft Sprocket Locking Tool
 to be used as OEM 2.000.004.200 on Fiat/Lancia and OEM 303-1477 on Ford.
- Camshaft Cover Aligner 
to be used as OEM 2.000.004.300 on Fiat/Lancia and OEM 303-1478 on Ford.
- Tensioner Adjuster
 to be used as OEM 1.860.987.000 on Fiat/Lancia.

Made in Taiwan

4mm Flexible magnetic pick up tool, 13006101A

Features:

Precision tool for removing broken debris and other metal parts and from glow plug apertures  and from hard-to-reach areas.

Diameter of magnet 4 mm

Working length - 380 mm

Origin: Taiwan

Heavy Duty stud remove & install tool 1/2"Dr x 22 mm Hex, 03M1430100

Features: Removes corroded, broken, distorted studs or studs with a damaged thread or smooth stem.
Fit screw diameter: M6-M19
Grip: 1/2 "Dr. and 22mm hex driver
Material: Cr-V

Made in Taiwan

Hose clamp pliers with red coating, 780-0074

These pliers have a ratchet locking mechanism.
Holds the bracket in an open position for easy removal and installation.
Comfortable handle with ergonomic grip.

Made in Taiwan

45° Hose clamp pliers with red coating, 780-0058A

Features: To remove and install clamps for hose connections in hard-to-reach areas.
The jaws are curved at 45 °.
With ratchet locking mechanism.
Comfortable handle with ergonomic grip.

Made in Taiwan

Mini Tube Cutter 3 – 25 mm, 022302ACM

Designed for cutting Copper and Aluminium tubing. Specifically suited to small bore tubing. 3 – 25 mm o.d.

• Speed and efficiency - fast cuts
• Quickly adjusts to the rquired cutting position
• Convenience - great in tight spaces

Made in Taiwan

Engine Timing Tool Set BMW Mini, PSA 1.4 & 1.6, Citroen, Peugeot, 780-8162

Suitable for timing 1.4 & 1.6 Valvetronic direct injection petrol, chain drive engines, fitted in BMW Mini, Citroen and Peugeot vehicles.
Content:

• Camshaft Locking Tool - Inlet
• Camshaft Locking Tool - Exhaust
• Camshaft Alignment Clamp
• Crankshaft Setting Pin
• M6 Setscrews (4)
• Chain tensioner

Models:

• Mini One Coupe R56 (2006-2010)
• Mini Cooper Coupe R56 (2006-2010)
• Mini Cooper HB R55 (2007-2010)
• Citroën C4 (2008-2009)
• Citroën C4 Picasso (2008-2009)
• Peugeot 207 (2006-2010)
• Peugeot 207CC (2007-2010)
• Peugeot 308 (2001-2010)
• Peugeot 3008 (2009-2012)
• Peugeot 5008 (2009-2012)

 Engine Codes:

• N12
• N14
• EP3 (8FS)
• EP3C (8FR)
• EP6 (5FW)
• EP6C (5FS)
• EP6DT (5FT)
• EP6DT (5FX)
• EP6CDT (5FV)
• EP6DTS (5FY)

Code: 52046

Mede in Taiwan