LÖTA

CV Joint clamp banding tool with cutter, 096-81433

Tool is easy removed by sliding sideways after winding has been completed.

Use to install and tighten the "band-it" or strap style clamps on CV joint boots or on power steering rack and pinion steering gear boots.
Once installed into the tool tighten the band by turning the handle on the tool;
Use a socket or wrench on the handle to torque the band to OE specifications.
When the boot clamp has been tightened to specs cut the band to the correct length by flipping the lever (at the front of the tool) forward.
Features:
CV joint boot clamp wrench securely fastens band-it style free-end clamps
Roll band clips and pre-formed CV boot clamps
Use by turning the winding mandrel with a 1/2-inch socket or wrench
Measures 11-1/2 inches long
Works on All CV Boot Clamps, ATV,  UTV and some automotive applications.

T-handle disclosed tire repair tool, 766-0217

Applicable: For steel belted redial tire.

Made in Taiwan

Flexible magne pick-up tool, 798-71005

Flexible shank diameter 5.0 mm
L - 400 mm
With plastic PP grip
Magnetic capacity: 0.600 kg (1.3 Lbs)
Overal lenght: 510 mm ( 20")

Made in Taiwan

Universal Clutch Alignment Tool, 318-K211

For easy alignment of single plate clutches. Also suitable for flywheels with no pilot bearing.
Additional Information
    For single plate clutches.
    Suitable for flywheels with or without pilot bearing.
    Fast to fit and remove.
    Universal applications.
    Size of collets: 14 mm - 28 mm across 3 adaptors. Cone size range from 35mm < 67mm.

155 pcs Socket set, 793-23415

Contents::
1/4"Dr. 6-pt. Flank socket: 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm
1/4"Dr. 6-pt. Flank deep socket: 4; 5; 6; 7; 8; 9; 10 mm
3/8" Dr. 6-pt. Flank socket : 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm
3/8" Dr. 6-pt. Flank deep socket: 10; 11; 12; 13; 14; 15 mm
1/2" Dr. 6-pt. Flank socket.: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm
1/2" Dr. 6-pt. Flank deep socket.: 14; 15; 17; 19; 22 mm
1/4" Dr. Star socket: Е4; Е5; Е6; Е7; Е8
3/8" Dr. Star socket: Е10; Е12; Е14; Е16; Е18
1/2" Dr: Star socket: Е20; Е22; Е24
1/4 Dr. Bit:
- PH0; PH1; PH2; PH3
- PZ0; PZ1; PZ2; PZ3
- Star: T8; T9; T10; T15; T20; T25; T30; T40
- Slotted: 3; 4; 4.5; 5; 5.5; 6; 6.5; 7 мм
- HEX: 3; 4; 5; 6; 7 мм
3/8" Dr. Bit:
- Star: T45; T47; T50; T55; T60
- HEX: 6; 7; 8; 9; 10 мmmм
10 мм х 30L Bit:
- Tampered Star: TH20; TH25; TH30; TH40; TH45; TH50; TH55
- PH2; PH3
- HEX: 4; 5; 6; 7; 8; 10; 12 mm
- Spline: M5; M6; M8; M10; M12
Hex key: 1.25; 1.5; 2; 2.5; 3 mm
1/4" DR; 3/8" DR.; 1/2" Dr. Universal Joint
1/2" Dr. Spark plug socket : 16 mm; 21 mm
3/8" DR. . Spark plug socket: 16 mm
Spaner handle 1/4" DR.
Extensions: 1/4" DR. х 2"; 1/4" DR. х 4"; 3/8" DR. х 3"; 3/8" DR. х 6"; 1/2" DR. х 5";1/2" DR. х 10"
Bit holder: 3/8" DR. х 10 mm; 1/2" DR. х 10 mm
1/4" Dr. Ratchet handle 72 teeth
3/8" Dr. Telescopic Ratchet handle 72 teeth
1/2" Dr. Telescopic Ratchet handle 72 teeth

Made in Taiwan

Anti freeze tester, 245-0107

• Tests ethylene glycol strength and includes temperature adjustment scale for accurate interpretation of mixture strength.
• Composite body and rubber bulb for workshop durability.

Windscreen wiper arm puller, 038-0661

Remove wiper arms easily with the very compact Windshield Wiper Arm Puller. This universal tool works on all makes and models of vehicles. It has a simple and effective design to work well in hard to reach areas, without inflicting damage to the surrounding paintwork or wiper arm.

Features:

• Compact, easy to use tool
• Efficient at removing wiper arms on all vehicle makes and models
• Functions well in tight spaces
• Does not damage paintwork or wiper arm
• Features a turning knob for quick work
• Forged body is long lasting and promotes good strength

Made in Taiwan

Timing tool set - GM / Opel - 2.2L petrol engines, 780-8032

Features:
- To lock or position the camshaft and synchronize the chain tension during engine repair.
- When disassembling and installing the water pump. The latch of the water pump belt pulley is blocked by the retainer.
Also used for removal and installation of water pump. It is necessary to lock the water pump Also applicable to 2.4L engines.
Application:
Models:
Astra / Vectra (02-08)
Astra Vectra vx220 Zafira and Signum (00-04)
Engines: Z22SE
Engine Code: K9K, G9T, G9U.
OEM No: KM 6148 / KM 6077 / J-43651

Made in Taiwan
 

CV Boot clamps pliers, 096-1407

• For all ear type clamps
• Application: for AUDI, BMW, CHRYSLER, FORD, GM, HONDA, MAZDA, MERCEDES, NISSAN, OPEL/VAUXHALL, VW etc.
• Designed : to use with extension handle or torque wrench
• Pliers remove and install newer-style flat band clamps used on various hose assemblies.

Bearing Puller Long Reach, 210-0858

3 position external jaws adjustable to 6, 8 and 10 inch length reach.
Screw extension extends screw length by 2-1/2 inch.
Forcing screw has 14 mm hex head for use with ratchet. 3/8 to 2 inch width bearing.
Reach: 300mm
Spread: 10~50mm
For long reach pulling jobs
Self Centering
Manufactured from drop forged alloy steel

Made in Taiwan

Valve spring compressor, 058-6231

• Designed to compress valve springs on overhead valve engines
• Unique, direct action compressor lever gives better visibility of valve spring retainers located in difficult access areas
• Jaw opening of  35 mm to 200 mm and throat clearance of 250 mm.

Made in China

3/8" Dr. Triangular Drain Plug socket for Renault, 777-XT10

Size: 10 mm

Applicable: Renault Megane

Material: Cr-V

Prodced in Taiwan

3/8" Dr.2 pc M10 Alternator tools, 2000-0504

1pc 3/8" Dr. Spline (XZN) socket bit M10x110mmL

1pc Reaction sorkscrew cap 33 teeth

Made in Taiwan

VW, AUDI Oil screw socket, 0089-016S

M16x38 mm
Works with 17 mm wrench
Special design for working in tight spaces
Application: VW , AUDI

Made in Taiwan

400 mm Spring compressor, 010-4200C

Professional tool for commercial or occasional use.
High quality set of compressors for working on struts on passenger cars and light comercials.
This listing is for one pair.
Suitable for use where there is limited space under the wheel arches.
1/2" square drive or 21mm spanner.

Made in Taiwan