Force

108 pcs 1/2" & 1/4" 41082 Combination set, 41085-5

Contents:
1. 1/4" :
13-6pt. Flan ksocket: 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm.
8-6pt. Flankdeep socket: 6; 7; 8; 9; 10; 11; 12; 13; (50 mm L)
5-Torx socket: Е4; Е5; Е6; Е7; Е8
18 Socket bit(32 mm L) :
- hex : 3; 4; 5; 6
- star : Т8; Т10; Т15; Т20; Т25; Т27; Т30
- slotted : 4; 5.5; 6.5
- phillips : PH1; PH2
- pozidriv : PZ1; PZ2
- Ratchet handle1/4" DR.
- Sliding T-bar 1/4"
- Universal joint1/4"
- Spinner 1/4"
- Extension bar1/4"2”(50 mm)
- Extension bar1/4"4”(100 mm
- Hex key : 1.5; 2; 2.5 mm

2. 1/2":
17-6pt. Flank socket: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; (32 mmL)
5-6pt. Flank deep socket: 14; 15; 17; 19; 22; (77 mmL)
2- Spark plug socket: 16; 20.6mm 5/16"
17- 5/16” Bit (30mmL) :
- hex : 7; 8; 10; 12; 14 mm
- star : Т40; Т45; Т50; Т55; Т60
- slotted : 8; 10; 12
- phillips : PH3; PH4
- pozidriv : PZ3; PZ4
8-1/2” Torx socket: Е10, Е11; Е12, Е14; Е16; Е18; Е20; Е24
Ratchet handle 1/2"
Wobble Extensionbar 5” (125 mm)
Extension bar10”(250 mm)
Universal joint1/2"
Adaptor for extension3/8” (F) x1/2" (M)
Bit holder(1/2"DR.х5/16")

Made in Taiwan

5 pcs Chisel punch set 5054

Contents:

1 Chisel 12 mm, L: 150 mm
1 Cape chisel, L: 150 mm
1 Pin punch 4 mm, L: 190 mm
1 Tapper punch 3 mm, L: 185 mm
1 Center punch 4 mm, L: 185 mm

Origin: Force, Taiwan

6 pcs Pin punch set, 50613

2mm/140mm
 3mm/150mm
 4mm/190mm
 5mm/200mm
 6mm/210mm
 8mm/215mm

Made in Force, Taiwan

10 pcs Five-sided star tamperproof bit set, 21013

1/4" Hex

L= 25 mm;

Sizes: TS08, TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 

10 pcs 1/4" Star tamperproof bit set, Pard 2104Т

Content: T-7H, T-8H, T-9H, T-10H, T-15H, T-20H, T-25H, T-27H, T-30H, T-40H

Material: Cr-V

Made in Pard, Taiwan

Multi function magnetic pick-up with miror, 617

These handy magnetic pick-up tools are a great addition to any garage or workshop.
The adjustable mirror can be attached to the telescopic rod to help you locate dropped screws or other items.
Includes a pointed head for scribing lines.

Magnetic pick-up tool in telescopi extended, max 63 mm
Take off the cap of bottom, the needle point head can be used for marking when draw a line or clean the narrow slot and small hole
Attach a fully adjustable mirror for inspection
All in one handly tool with pocket clip.

Magnetic torque angle meter, 9G1802

• Due to its flexible shaft construction, easy to use in narrow space such as engine room
• Scale read from 0 - 360°  and minimum read is 2°
• Chrome vanadium socket applied
• Fixed by magnet

Made in Taiwan

42 pcs 10 mm Bit set, 4421

Contents:

10mm Hex bit 4; 5; 6; 7; 8; 10; 12 mm (30mm)
10mm Hex 4; 5; 6; 7; 8; 10; 12 mm (75mm)

10mm Star bit T20; T25; T30; T40; T45; T50; T55; T60 (30 mm)
10mm Star bit T20; T25; T30; T40; T45; T50; T55; T60 (75mm)

10mm Spline bit M5; M6; M8; M10; M12 (30 mm)
10mm Spline bit M5; M6; M8; M10; M12 (75 mm)

2 - Bit holder 3/8"x10 mm и 1/2"x10 mm

Material: Cr-V

Produced by Force, Taiwan

Adjustable spanner wrench 9U0701

This tool is ideal for adjusting pillow block bearing

Also works well on international model ""M"" water pump or power take off on all.

Adjustable from 1/2" to 2-3/4"

Produced by Force, Taiwan

Chain oil filter wrench 1/2"Dr., 61901

Suitable for removing oil filters up to 120mm in diameter, simply locate the chain around the oil filter and it tightens to fit the diameter.

This tool is designed to be used with a 1/2 drive ratchet or 21 mm spanner.

Auto Battery & Charging System Analyser, 88424

Made in Force, Taiwan

3 pcs Seal puller 903G13

- Quickly and easy remove O-ring or grease and oil seal.
- Special angle on the tool head provides a better work than traditional seal pullers.
- 3 different lenghts and tips fit nearly all seal applications.
- Simple insert the tool tips, press and pull.

Lenght: 165; 117; 150 mm

Produced by Force, Taiwan