AEROPRO

Air grease gun w/4pcs accessories, 0082
Features:

• 1pc-air grease gun
• 1pc-handle
• 1pc-rubber tube
• 1pc-aluminum tube
• 1pc-quick coupler

Specification:
Highest pressure: 90 Psi (6 Bar)
Operating pressure: 4.0 Bar
Capacity: 500cc(bulk)/16 oz
Air hose: 3/8"
Air Inlet: 1/4"
Air consumption: 3.5 - 6 cfm (100- 170 l/min)

Made in China

2700 Nm 1"Dr. Professional Air impact wrench AP7465

Powerful professional high quality wrench, suitable for access in limited areas
Heat treated impact mechanism
Convenient composite side handle for more control during operation
1 ”Dr.anvil, made of steel alloy
Application: when changing tires, repairing trucks and buses, heavy equipment, agricultural equipment and other activities in car repair shops and industry.
RECOMMENDED AIR PRESSURE: 90 Psi (6.3 Bar)
Parameters:
Square drive: 1 "
Bolt capacity: 1-3 / 4 "(45mm)
Air inlet: 1/2 "
Free speed: 4000 rpm
Operating torque: 2700 Nm (2000Ft-lb)
Sug.Air Comp: 5HP
Air hose: ID 5/8 "(16 mm)
Average air consumption: 1140 L / min (40 cfm)
Overall length: 584 mm (22.99 ")
Net weight: 15.5 kg (34.2 lbs)

Made in China

2-in-1 Brad Nailer and Stapler, SF5040E

Features:
Nail head and drive pin are processed by German Ipsen heat treatment, high strength, wear resistance.
More than 10-15 million times Pin life.
Jamed nail rate at about 0.03%.
Air-class cushion bumper wear-resistant bumper.
Sequential fire function.
High-strength hard alumina shell wear resistanc.
When the nail is used up, it will be displayed on the clip.
Handle sheath TPE material is soft and will not crack.
High-strength aluminum alloy die-casting gun body.
Nail Depth adjustment device for different occasions.
360 degree exhaust cover

Technical Parameters :
Max pressure: 120psi (8.3bar)
Load capacity: 100pcs
Operating pressure: 60-100psi (4- 7bar)
Max.pressure: 120psi
Nail length: 10-50mm
Stapler length:  16-40mm
Stapler width: 5.7 mm
Weight: 1.48kg (3.26lb)
Dimension: 55 x 245 x 250 mm

3100 Nm 1"Dr. Professional Air impact wrench AP7488

Powerful professional high quality wrench, suitable for access in limited areas
Heat treated impact mechanism
Convenient composite side handle for more control during operation
1 ”Dr.anvil, made of steel alloy
Application: when changing tires, repairing trucks and buses, heavy equipment, agricultural equipment and other activities in car repair shops and industry.

RECOMMENDED AIR PRESSURE: 90 Psi (6.3 Bar)

Parameters:
Square Drive: 1"
Capacity Bolt Size: 1-3/4" (45mm)
Free Speed: 3600 RPM
Working Torque: 3100N.m (2220ft-lb)
Air Inlet (NPT): 1/2"
Air Hose (ID): 5/8"
Avg.Air Consumption: 1140 l/min (40 cfm)
Overal lenght: 586mm (23.11")
Net Weight: 16,300 kgs (35.9lbs)

Made in China

6” (150 mm) Air Polish (Side exhaust), AP17316

Main features:
Mainly used in shipbuilding, automotive and other industries for polishing and cleaning.
Composite plastic body, light weight.
Unique ergonomic design.
Side exhaust.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Specification:
Sanding Pad: 6"
Free Speed: 10000 Rpm
Air Inlet (Npt): 1/4"
Air Hose(Id): 3/8"
Avg. Air comsumption: 5 cfm (141.5 l/min)
Recommended Air pressure: 90 Psi (6.3 Bar)
Sug.Air Comp: 2HP
Net Weight: 1.84kg
Overall Length: 240 mm

Optional: Sanding pad Ø150 mm - 12.00 lv.

1/4" Air Die Grinder, RP27313

Description:
Light weight aluminum body.
Safety trigger prevents accidental starts.
Rear exhaust.
It can be used with all types of accessories for porting,weld breaking,and smoothing sharp edges,as well as deburring polishing,and grinding.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Technical Parameters:
Free Speed: 25 000 RPM
Working Pressure: 0.63 MPA (6.3 Bar)
Overall Length: 157 mm
Air Inlet: 1/4"
Avg.Air Consumption: 3cfm(85.5I/min)
Air Hose: 3/8"ID
Net Weight: 0.35Kg
Grinder Cap: 6 mm (1/4")

1/4" Professional High Speed Air Die Grinder, AP17314

Description:
Great for high-speed sanding, polishing and cleaning using a variety of abrasive tools attached to the machine shaft.
Housing made of light composite material.
Ergonomic design suitable for one-hand operation
Protective trigger preventing accidental machine start-up.
Rear exhaust.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Technical Parameters:
Chuck size: 6 mm (1/4") and 3 mm (1/8”)
Free Speed: 22 000 RPM
Working Pressure: 0.63 MPA (6.3 Bar)
Air Inlet: 1/4"
Air Hose: 3/8"ID
Avg.Air Consumption: 4.5 cfm (128.2 I/min)
Net Weight: 0.54 Kg
Overall Length: 180 mm
 

Under coating gun 619

Specializing in spray vehicle glue on the car chassis and rustproof fluids both on chassis and body interlayer as well as various kinds of primer and subcoat paint.
With the replaceable rubber nozzle. Apply to all kinds of spray finishing, also can be used with disposable glue pot.
Enjoy uncomplicated, convenient and fast spraying.
Specification:
Air Inlet: 1/4 "
Rated Pressure: 4-7 Bar
Max. pressure: 9 Bar (150 Psi)

Made in China

1/4"(6mm) Air Angle Die Grinder, RP27315

Features:
Angle head provides easy access into tight space.
Ideal for grinding, edge-breaking, deburring, porting and polishing.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Specification:
Grinder Cap: 6 mm (1/4")
Free Speed: 22 000 RPM
Working Pressure: 0.63 MPA (6.3 Bar)
Avg.Air Consumption: 3cfm(85.5I/min)
Air Inlet: 1/4"
Air Hose: 3/8"ID
Overall Length: 162 mm
Net Weight: 0.49 Kg
 

1/4" Professional High Speed Angle Die Grinder, AP17315

Great for high-speed sanding, polishing and cleaning using a variety of abrasive tools attached to the machine shaft. The angled head allows access to narrow, difficult-to-reach areas.
Made of light composite material.
Ergonomic design suitable for one-hand operation
Protective trigger preventing accidental machine start-up.
Rear exhaust.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Technical Parameters:
Chuck size: 6 mm (1/4") and 3 mm (1/8”)
Free Speed: 20 000 RPM
Working Pressure: 0.63 MPA (6.3 Bar)
Air Inlet: 1/4"
Air Hose: 3/8"ID
Avg.Air Consumption: 3  cfm (85.5 I/min)
Net Weight: 0. 45 Kg
Overall Length: 156 mm

1/4" Dr. Professional Air-powered ratchet wrench, 17414

Description:
Light-weight aluminum body.
Compact head design allows flexibility in tight area.
Forward/reverse lever located behind the ratchet head for quickly change of direction.
It's designed for removing and installing spark plugs and different engine parts,such as water pumper, radiators etc.
Front exhaust.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Technical Parameters:
Square drive: 1/4"
Capacity bolt size: 1/2" (12.5 mm)
Free speed: 160 rpm
Avg. Air Consumption: 240 л/мин. (8 cfm)
Working torque: 67.5 N.m
Air inlet: 1/4"
Air hose: 3/8"
Net weight: 0.6 kgs

1/2" Dr. Professional ratchet wrench, RP7412

Description:
Light-weight aluminum body.
Compact head design allows flexibility in tight area.
Forward/reverse lever located behind the ratchet head for quickly change of direction.
It's designed for removing and installing spark plugs and different engine parts,such as water pumper, radiators etc.
Front exhaust.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Technical Parameters:
Square drive; 1/2"
Capacity bolt size: 1/2" / 13mm
Free speed Rpm: 160
Working torque: 68 N.m
Air inlet: 1/4"
Air hose: 3/8"
Avg. Air Consumption: 77 л/мин. (2.7 cfm)
Overal Length: 254 mm (10”)
Net weight: 1.200 kgs

5" (125 mm) Air angle sander, AP7326

Features:
Professional sander with unique ergonomic design.
Low vibration for swirl-free finish.
Built-in regulator for positive speed control.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Specification:
Sading Pad:  5"
Free Speed: 10000 RPM
Air Inlet (NPT): 1/4"
Air Hose(ID): 3/8"
Avg. Air consumption: 5 cfm (141.7 l/min)
Sug. Air Comp: 2HP
Net Weight: 1.800 kg

1/8" High speed Micro air die grinder set, RP7819

Designed for grinding, polishing, smoothing using different types of abrasive tools attached to the machine shaft.
Ergonomic and compact, one-handed.
Ideal for precise grinding and polishing.
Allows access to narrow, hard-to-reach workspaces.
Contents: 1pc Micro Air Grinder, Mini Oiler, Oil Pot, 2pcs Hand Wrenches, Quick connect coupling 1/4”Female thread, 10pcs Mounted Stones
Technical data:
Free speed: 54000 rpm.
Chuck size: 3 mm (1/8 ")
Air consumption: 2 cfm (57 l / min)
Working pressure: 6.2 bar
Air Inlet: 1/4 "
Air Hose Size: 3/8 "(Inside Diameter)
Weight: 0.330 kg.

Made in China

Body Washing spray Gun high pressure car cleaning gun RP8036

Conventional body washing gun & diesel washing gun
Gun body is polished or painted
Suitable for spraying a wide range of oils, cleaning agents and rustproofing liquids
Fitted with adjustable nozzle
High quality product for heavy industrial use
Heat treated finished for extra Durability and resistance to corrosion
Simple and reliable operation, compact during storage and suitable for portable use

Specification:
Material: Aluminum
Tank color: Red
Tank capacity: 900cc
Air Inlet:  1/4"
Rated pressure: 3-5 Bar
Max. pressure: 5 Bar

Made in China