WELDING MACHIE

250A Inverter welding machine IGBT MIG/MAG and MMA Elgen Jet Power - MIG-250PS

Features

- New design,inverter IGBT Portable MIG/MAG welding machine,compact but high efficiency.
- It adopts inverter technologh with good welding quality and high efficiency.
- DC current,fan-cooled,thermostatic protection.
- Suitable for gas MIG/MAG,and flux(gasless) welding wire.
- Suitable for welding of low carbon steel and low alloy steel.

Technical Data:

Mains voltage: 220 V
Frequency: 50-60 Hz
No-load voltage: 62 V
MIG:
Wire dia: 0,8 – 1,0 мм
Output current: 40 – 250 А
Output voltage: 16 – 26.5V
Rated duty cycle: 60 %
Power factor: 0.93
Insulation class: F
Housing shielding grade: IP21

MMA:
Output current: 20 – 250 А
Output voltage: 20.8 – 30V
Rated duty cycle: 60 %

N.W.: 19 kgs

Made in China

Gas nozzle 150TB

Lenght: 54mm

Hole: 12mm

Grip: 12mm

200A Inverter IGBT DC MMA/LIFT-TIG Welding machine Shonco welding technology, MMA-200HD, 30210

1. Advanced (IGBT) inverter technology and Single PCB structure with high duty-cycle, with switch for MMA/LIFT-TIG/CEL (E6010, E6011 cellulosic electrode), VRD On/Off can be selective, built- in hot-start and Anti-sticking.
2. High efficiency, low consumption, energy saving, more attractive design.
3. Stable performance, with strong compensation capability, resistant to voltage fluctuation.
4. Easy for arc starting less splash, thermostatic control, Automatic over-voltage and over-voltage and over-current protection, fan cooled.
5. Light, compact, easy to operate.
6. Applicable for welding of all kinds of low carbon steel, medium carbon steel and alloy steel. Etc.
7. Support ARC FORCE welding current 0-10A.
8. 35-50mm² Europe plug.
Technical parameters:
Input Voltage(V): 220V-240V
Frequency (Hz): 50/60 Hz
Rated Input Capacity(KVA): 7.1 kVA

Power Factor: 0.93
No-load Voltage(V): 68 V
Current Range(A): 10-200
Rated Duty Cycle (%):60%
Usable Electrode (mm): 1.6-4.0
Insulation Class: F
Protection Degree: IP21
Weight (kgs): 4.1 kgs
Accessories:
Electrode holder with 2 m cable
Earth clamp with 2 m cable
Welding mask
Brush

The equipment for TIG is not included in the price.

Price for a torch for argon welding: BGN 78.

Made in China

10-25mm2 200A Welding Cable Connector Plug

Can be used for electric cable 10-25mm2
Welding current: 200A(maximal)
Material : Copper + Rubber
Model : DKJ10-25
Wire Section: 10-25mm²
Color : Black

Made in China

Auto Darkening Welding Goggles, 30725, 30725

Auto Darkening Welding Glasses for TIG MIG MMA Plasma Weld Mask, 30725
Main function: protect the eyes from vision, face slag, no peeling on the face
Compact auto-darkening lenses
Application: Welding in tight, awkward positions. Welding with hard hats
Wider panoramic view with brighter color
Equipped with dual sensor
Great For TIG MIG MMA, Plasma Applications with Grinding Feature
Viewing Size: 122.2*35mm with 2 Premium Sensors
Better clarity, True color view - 1/1/1/2 Optical Clarity
Increased battery life
Compatible with hard hats,Respirators and Eye protections
Features: anti-glare, anti-shock, anti-splash
Applicable environment: electric welding, gas welding, grinding, laboratory, etc.

Specifications:
Filter size: 190.5mm×77.5mm×76.25mm
Active Viewing Area: 122.5mm×35mm
Light Shade: DIN4
Dark Shade: DIN5～DIN9/ DIN9～DIN13
Shade Control: Stepless shift
Switching Time: 3/10000S
Sensitivity Adjustment: Stepless Control
Delay Time: 0.1S～0.8S
Power Supply: Li-battery
Rated Capacity of Li-battery: 600mAh
Replaceable battery: Yes
Operating Temperature: -5℃～55℃
Arc Sensor: 2
Mask Material: SEET/ABS
UV/IR Protection: DIN16
Test: NO
Low Battery: YES
Grind: YES
Cut: YES
LED: NO

Made in China

CUT-40PI - IGBT Plasma Cutting machine Elgen Jet Power

Plasma cutting machine are made by international most advantaged invert technical .50Hz/60Hz frequency is inverted to high frequency (frequency is over 100KHz) by IGBT, then step down voltage and rectification current, inverter power supply generates powerful DC current through PWM technical. Because inverter technical of switch power is used, dimensions and weight of main transformer has reduced substantially and efficiency has increased 30%
Piloting arc system can strike arc easily with principle of high frequency oscillating .It has functions that it can supply gas ahead and turn off gas delayed.
Cutting machine has characteristics as following:
Stabilizing.
Reliability.
Lightness.
Save-energy and no noise.
High cutting speed.
Cutting smoothly and no polish demands

Made in China

Oxygen / LPG Cutting nozzle 5-10 mm

Cutting range: 5-10 mm

Inverter IGBT Plasma cutter Shonco Welding technology - CUT-50HL, 30212

1). Advanced (IGBT) inverter technology and Three PCB structure with high duty-cycle.
2). Post gas time can be adjusted to better cutting performance and save gas.
3). With switch 2T/4T suitable for different cutting mode.
4). Touch Arc starting cutting.
5). Easy to cut thick metal plate in a fast and economical way.
6). High cutting speed, 2 times faster than oxy-cutting. Narrow cutting gap, smooth cutting surface, small
distortion.
7). Widely use for cutting stainless steel, copper, steel and aluminum, etc.
Technical Data:
Max Cutting thickness(mm): 12 mm
Input Voltage(V): 220 V - 240 V
Frequency (Hz): 50/60 Hz
No load voltage(V): 230 V
Input capacity (KVA): 6.3 kVA
Current range(A): 10-45
Rated Duty Cycle (%): 60%
Insulation Class: F
Starting arc: Contact
Protection Class: IP21
Power factor: 0.93
Weight (Kgs): 8 kgs

0.9mm 1kg Flux Cored Welding Wire Without Gas For MIG Welding

Premium quality, all position, flux-cored (gasless) welding wire is for general purpose MIG welding of mild steel.
Self-shielded flux cored wire for lap and fillet welds of mild and medium tensile steels not exceeding 510MPa.
All-positional welding of single pass automatic and semi-automatic fabrication.
This Flux Cored Weld Wire can be applied for aluminized steel and galvanized steel from 1.2 to 5.0mm.
Smooth arc action, full slag coverage, easy slag removal.
Ideal for general fabrication & structural work requiring no impact properties.
Can be welded using DCEN polarity.
Suitable for a variety of applications such as prefab, building fabrication, tanks, ornamental iron, farm implement repairs, and general fabrication.

Auto Darkening, Solar-Powered Welding Goggles, 30728

This solar auto darkening welding goggle features anti-ultraviolet, infrared radiation, anti-glare. Auto-darkening filter automatically changes from a light state to a dark state when an arc is struck, and it returns to the light state when welding stops. Widely applicable to gas welding, steel welding, cutting, welding and so on.
Features:
PC lens can resist ultraviolet ray
Anti-scraping, lens covered with anti-scraping coating
Anti-strong light, protect your eyes
Lens width are reinforced to anti-shock
Strong abrasion resistance, impact resistance
Durable use
Specifications:
Active Viewing Area: 109mm×32.5mm
Light Shade: DIN3
Dark Shade: DIN11
Shade Control: NO
Switching Time: 5/10000S
Sensitivity Adjustment: NO
Delay Time: 0.2S
Power Supply: Li-battery & Solar
Rated Capacity of Li-battery: 60mAh
Replaceable battery: NO
Operating Temperature: -5℃～55℃
Arc Sensor: 2
Mask Material: PC/ABS
UV/IR Protection: DIN16
Test: NO
Low Battery: NO
Grind: NO
Cut: NO
LED: NO
Weight: 107 g

Made in China

Contact Tip holder - difuser M6x42 TB 150

Gas Nozzle Holder with Nozzle Spring for MIG/MAG Welding Torch Contact Tip Holder of MB 15AK Welding Gun
Specifications:
Material: Copper
Model: MB15AK
Applicable: MB 15AK MIG welding torch.
Product length：42mm / 1.65''

Anti spatter spray
Description
TBi anti spatter spray significantly reduces the adhesion of welding spatter to metal parts. If the spray is applied on the torch head regularly, the life of consumables is prolonged and clean-ing of the torch simplified. The spray may also be applied to the work piece. After welding, spatter can easily be brushed off, the weld looks cleaner.
The anti-stick property of the spray will persist even with high temperatures. The spray is suitable for parts that will be coated later, thorough cleaning and previous tests are necessary.

Gas nozzle 250TB

Leather welding gloves

Made of high quality soft leather. Provide protection of the hands from burns and injuries.

Gloves are used in welding activities.

Size: 11"

Argon regulator

This gas regulator has reasonable and compact structure, and has gas pressure and flow indicator.
The safety valve can secure and personal safety of operator, which has stable performance and is solid and durable.
The gas regulator is applicable to liquid CO2 gas and mixed gas (CO2+agron).
Specification:
Voltage of heating pipe:  36V; 110V; 220V; 240V
Power of heating pipe: 120W; 150W; 210W; 190W
Applicable gas: Liquid CO2 gas for welding and Mixed gas for welding MAG (Ar+CO2)
Input pressure:
Liquid CO2 gas for welding : ≤ 11.8 Mpa (120 kgf/cm²)
Mixed gas for welding MAG (Ar+CO2): ≤ 14.7 Mpa(150 kgf/cm²)
Output pressure:
0.35±0.05MPa(0.5±0.5kgf/cm²)
Inlet thread: G 5/8-14, 0.86-14 Others
Outlet thread: M12x1, M16x1.5 Others
Gas Flow: 0-25 L/min, 0-30 L/min
Rated load persistency rate: 100%
Operation pressure of safety valve: 0.65 – 0.8MPa (i.e. 6.5 – 8 kgf/cm²)