TOOL SETS

40 pcs Power bits set, 002-2026

Contents:
1бр.: 3/8" DR. adaptor
1бр.: 1/2" DR. adaptor
7pc Hex bits L30 mm: 4, 5, 6, 7, 8, 10 и 12
7pc Hex bits L75 mm: 4, 5, 6, 7, 8, 10 и 12
7pc Star bits L30 mm: T - 20, 25, 30, 40, 45, 50 и 55
7pc Star bits L75 m: Т- 20, 25, 30, 40, 45, 50 и 55
5pc Spline bits L30 mm: М - 5, 6, 8, 10 и 12 (30mm Long)
5pc Spline bits L75 мм: М - 5, 6, 8, 10 и 12 (75mm Long)
Material: Chrome Vanadium (6150Crv)

Made in Taiwan

4 pcs Star wrench set 5041

Contents:

Е6хЕ8; Е10хЕ12; Е14хЕ18; Е20хЕ24

Material: Cr-V

Origin: Force, Taiwan

11 pcs Bearing and seal driver set, 50130
For the installation of bearings and seals. Helps avoid damage to bearing and seal faces.
This set will provide the correct size driver for 99%, bearings, bush and oil seal installations.
The reverse side of the collar can also be used to drive seals.
Supplied with a strong blow mould case.
Ideal for car, commercial motorbike or any application that has bearings or seals.
Always drive that bearing in square and flush first time.

Tail Pipe expander

Drop forged with heat treated steel
Designed quickly and easily straighten out clamp dent in mufflers and tailpipes. A simple wrench turn expands pipe for exhaust system repair and installation.
Works with all 1-1/8" to 3-1/2"ID. thin wall pipes
Capacity:
Small expander: 1-1/8" to 1-3/4" (29-44mm)
Medium expander: 1-1/2" to 2-1/2" (38-64mm)
Large expander: 2-1/8" to 3-1/2" (54-89mm)

The set is in blue case.

3 pcs Flexible Hose Clamps, 903G12

108 pcs 1/2" & 1/4" 41082 Combination set, 41085-5

Contents:
1. 1/4" :
13-6pt. Flan ksocket: 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm.
8-6pt. Flankdeep socket: 6; 7; 8; 9; 10; 11; 12; 13; (50 mm L)
5-Torx socket: Е4; Е5; Е6; Е7; Е8
18 Socket bit(32 mm L) :
- hex : 3; 4; 5; 6
- star : Т8; Т10; Т15; Т20; Т25; Т27; Т30
- slotted : 4; 5.5; 6.5
- phillips : PH1; PH2
- pozidriv : PZ1; PZ2
- Ratchet handle1/4" DR.
- Sliding T-bar 1/4"
- Universal joint1/4"
- Spinner 1/4"
- Extension bar1/4"2”(50 mm)
- Extension bar1/4"4”(100 mm
- Hex key : 1.5; 2; 2.5 mm

2. 1/2":
17-6pt. Flank socket: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; (32 mmL)
5-6pt. Flank deep socket: 14; 15; 17; 19; 22; (77 mmL)
2- Spark plug socket: 16; 20.6mm 5/16"
17- 5/16” Bit (30mmL) :
- hex : 7; 8; 10; 12; 14 mm
- star : Т40; Т45; Т50; Т55; Т60
- slotted : 8; 10; 12
- phillips : PH3; PH4
- pozidriv : PZ3; PZ4
8-1/2” Torx socket: Е10, Е11; Е12, Е14; Е16; Е18; Е20; Е24
Ratchet handle 1/2"
Wobble Extensionbar 5” (125 mm)
Extension bar10”(250 mm)
Universal joint1/2"
Adaptor for extension3/8” (F) x1/2" (M)
Bit holder(1/2"DR.х5/16")

Made in Taiwan

Timing Alignment Kit 41pcs, AI010041

A set of tools for securing dual camshaft engines (multi-valve) during the replacement of the timing belt.
The kit includes various adapters, flywheel holding tools, and pins, covering specific applications for locking the crankshaft, pulley, and flywheel.
The universal kit is applicable to a wide range of cars from Ford, Honda, Land Rover, VW-Group, Renault, Citroen, Peugeot, Fiat, Vauxhall / Opel, and Rover.
Contents:
10pcs Camshaft Locking Adapters
4pcs Locking Pins
1pc Alignment and Locking Plate
1pc Balancing Pin
1pc TDC (Top Dead Center) Position Holder
2pcs Flywheel Holding Tool

42 pcs 10 mm Bit set, 4421

Contents:

10mm Hex bit 4; 5; 6; 7; 8; 10; 12 mm (30mm)
10mm Hex 4; 5; 6; 7; 8; 10; 12 mm (75mm)

10mm Star bit T20; T25; T30; T40; T45; T50; T55; T60 (30 mm)
10mm Star bit T20; T25; T30; T40; T45; T50; T55; T60 (75mm)

10mm Spline bit M5; M6; M8; M10; M12 (30 mm)
10mm Spline bit M5; M6; M8; M10; M12 (75 mm)

2 - Bit holder 3/8"x10 mm и 1/2"x10 mm

Material: Cr-V

Produced by Force, Taiwan