INSTRUMENTS

Windshield Removal Tool Set, 50220

This universal kit includes all of the specialised tools required to safely and quickly remove windshields from a wide variety of vehicles.
Item is supplied with a rubber gasket knife, cutting wire, two (2) handles, wire feeder tool, trim pad remover and molding release tool.

Set includes:

- Wire: Three strong galvanised steel wires braided to form one wire
- 2 pcs Wire gripping handles: Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held.
- Windshield removal tool: Cuts the vinyl adhesive compound around the windshield.
- Wire feeder tool: Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield
- Trim pad remover: Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.
1PC stainless steel wire with reel.
2PCS Wire gripping handles.
1PC Windshield removal tool
1PC Wire feeder tool
1PC Trim pad remover
1PC Windshield molding release tool

Made in China

Vacuum pressure pump brake bleeding kit, 50404A

Easily bleed brakes and test automotive vacuum systems by yourself
Works on all vehicle makes and models
Replaceable O-ring cylinder head gasket, rubber piston ring and valves
Precise pressure gauge: 0 -30inHg, 0 -760mmHg 

Made in China

6 mm 1/2" Dr. Stud Extractor, 50922-6

Designed for removing studs without damaging the threads.
Safe clamping due to 3 rollers. The extractors are the concentric roller bearing type that won't damage the thread on the stud.
Material: Cr-V
1/2" Drive (Hex 21mm).
Size: 6 mm.

Made in China

Jaguar, Land Rover 2.0 - Diesel Engine Timing Tool, 50558

Application: on Jaguar F PACE, XE, XF (2015 Onwards). Land Rover, Discovery Sport, Range Rover Evoque(2015 Onwards).

Engine codes: AJ-200D, 204DT, AJ200D, AJ200, 204DTD.

OEM# 303-1625, 303-1631, 303-1630, 303-1627

Made in China

M12x2.0 Spindle for Press and Pull Sleeve Kit, 50093-2

Pulling spindle with nuts and thrust bearings.

Size: M12x2.0 mm

Length: 450 mm

Material: carbon steel

Made in China

10 pcs Tube flaring tool set, 50703

For metal tubes and pipes with a wall thickness of 0.7 and 1.0 mm.
Pipe diameter 4.75 - 10 mm.
For open (F) or double (E) flares according to DIN 74234, for normal 90° and 180° flares.
For flares on rolled and drawn pipes.
With replacesble hinged griping jaws.

The 24 pcs Pneumatic Injector Puller Set, 51247 is designed for efficient injector removal. This comprehensive kit includes an air-powered tool that uses vibrations and 20-30Nm torque to remove tight injectors, eliminating the need for inertia hammers or mechanical extractors.

Key Features:

• Air Vibration Tool
• Wide Variety of Adapters
• Puller Hooks for Deep Positions

M10x1.5 Spindle for Press and Pull Sleeve Kit, 50093-1

Pulling spindle with nuts and thrust bearings.

Size: M10x1.5 mm

Length: 450 mm

Material: carbon steel

Made in China

3/4" Dr. 17 mm 12-pt Impact deep socket, 50479

Material:  Cr-Mo
12-points
Deep:  110 mm
Applicable: For Mercedes trucks cylinder head screw.
For models MB400, MB420, MB500

Made in China

Hydraulic porta power jack, 10 t

 Min. height: 150mm

 Max. height: 470mm

10 pcs Tubbing cutter & double flaring tool kit 656

Contents:

1 pc Tubbing cutter
Adaptors: 16.3 "- 1/4" - 16.5 "- 3/8" - 16.7 "- 1/2" и 5/8 "
1-9/16" Screen bar

VAG 2.7 / 3.0 / 4.0 / 4.2 TDI - Engine Timing Tool Set, 51190

Features: Used to work on timing chain, cylinder head, HP pump and engine timing applications on VAG 2.7 / 3.0 TDI V6 and 4.0 / 4.2 TDI V8 common rail diesel engines.
Set includes:
High pressure pump sprocket remover
Crankshaft turning tool - type 2
Camshaft sprocket holding tool
Camshaft alignment/ locking tool
Timing chain tensioner locking pin (2pcs)
Cam belt tensioner locking pin
Crankshaft pulley bolt adaptor
Crankshaft locking pin (4.2 TDi)
Crankshaft TDC locking screw
High pressure pump locking pin
Injection pump/ camshaft locking pin
High pressure fuel pump locking tool
Camshaft locking pins (2pcs)
Chain tensioner mounting bracket
Applicablе:
Compatible for Audi: A4 (05-16), A5 (07-16),
A5 Sportback (11-17),
A6 (04-18), A6 Allroad (06-18),
A7 (10-18), A8 (03-14),
Q5 (08-17), Q7 (06-15), SQ5 (13-15)
Compatible for VW: Phaeton (04-14), Touareg (05-14)
Engine codes:
2.7 TDI V6: BBP, BSG, CAMA, CAMB, CANA, CANC, CAND, CGKA, CGKB
3.0 TDI V6: ASB, BKN, BKS, BMK, BNG, BUG, BUN, BWA, BWE, BWJ, BWT, BYD, BYK, BZC, CAPA, CARA, CASA, CASB, CASC, CASD, CATA, CCLA, CCMA, CCWA, CCWB, CDLA, CDLB, CDLC, CDLD, CDLF, CDMA, CDTA, CDTB, CDUC, CDYA, CDYB, CDYC, CEXA, CGQB, CJGA, CJGC, CJGD, CJMA, CKVB, CKVC, CLAA, CLAB, CLZB, CNRB, CPNB, CRCA, CRTD, CRTE, CRTF, CTBA, CTBC, CTBB, CTCC
4.0 TDI V8: ASE
4.2 TDI V8: BTB, BVN, CCFA, CCFC, CDSB, CKDA

OEM#: T40049, T40058, T40060, T40061, T40062, T40064, T40071, T40135, T40237, T40245, T40246, 3242, 3359.

Made in China

M18x2.5 Spindle for Press and Pull Sleeve Kit, 50092-5

Pulling spindle with nuts and thrust bearings.

Size: M18x2.5 mm

Length: 350 mm

Material: carbon steel

Made in China

6 pcs 3/4" Dr. Impact deep socket, 50476

Material: Cr-Mo
Contents:
3/4" Dr. TORX Impact deep socket : E18, E20, E22, E24
3/4” Dr. 12-pt Impact deep socket: 17 mm, 19 mm

Made in China

Door upholstery tack remover 031-A611201

Designed to remove the car door panel. Convenient extended handle.

Made in Taiwan