INSTRUMENTS

The 24 pcs Pneumatic Injector Puller Set, 51247 is designed for efficient injector removal. This comprehensive kit includes an air-powered tool that uses vibrations and 20-30Nm torque to remove tight injectors, eliminating the need for inertia hammers or mechanical extractors.

Key Features:

• Air Vibration Tool
• Wide Variety of Adapters
• Puller Hooks for Deep Positions

M10x1.5 Spindle for Press and Pull Sleeve Kit, 50093-1

Pulling spindle with nuts and thrust bearings.

Size: M10x1.5 mm

Length: 450 mm

Material: carbon steel

Made in China

3/8" Dr. 30pcs Socket set, 3302

Contents:
6-pt. Flank sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 mm
6-pt. Flank deep socket: 8, 9, 10, 12, 13, 14 m
3/8"Dr. 24 teeth Ratchet handle, 80233
3/8"Dr. Universal joint,  80531
3/8"Dr. Extension bars: 75mm, 150mm
3/8"Dr. Spark plug sockets 16, 20.6 mm

Material: Cr-V

Produced by Force, Taiwan

Auto body repair pull clamp (Two way),113-01017C

Compact and suitable for use in different spaces.
With two-way direction:

-Cross capacity: 2 tons
- Longitudinal capacity: 5 tons
Bolt size: 16 mm x 70 mmL
Zinc plated. Corrosion resistant.

Made in Taiwan

Brake Piston Wind Back Tool, 50066

Specifications:
Chemically blackened steel spreader plates
Suitable for most ATE, Bendix, Delco, Brembe and Girling calipers
Fitted with tommy bar
Chrome screw with linking bar
Capacity: 0 ~ 2.5" (0 ~ 65mm)
Applications:  Alfa, Audi, Fiat, Ford, Nissan, GM (Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche. The list is endless...

12 mm 1/2" Dr. Stud Extractor, 50922-12

Designed for removing studs without damaging the threads.
Safe clamping due to 3 rollers. The extractors are the concentric roller bearing type that won't damage the thread on the stud.
Material: Cr-V
1/2" Drive (Hex 21mm).
Size: 12 mm.

Made in China

VAG 2.7 / 3.0 / 4.0 / 4.2 TDI - Engine Timing Tool Set, 51190

Features: Used to work on timing chain, cylinder head, HP pump and engine timing applications on VAG 2.7 / 3.0 TDI V6 and 4.0 / 4.2 TDI V8 common rail diesel engines.
Set includes:
High pressure pump sprocket remover
Crankshaft turning tool - type 2
Camshaft sprocket holding tool
Camshaft alignment/ locking tool
Timing chain tensioner locking pin (2pcs)
Cam belt tensioner locking pin
Crankshaft pulley bolt adaptor
Crankshaft locking pin (4.2 TDi)
Crankshaft TDC locking screw
High pressure pump locking pin
Injection pump/ camshaft locking pin
High pressure fuel pump locking tool
Camshaft locking pins (2pcs)
Chain tensioner mounting bracket
Applicablе:
Compatible for Audi: A4 (05-16), A5 (07-16),
A5 Sportback (11-17),
A6 (04-18), A6 Allroad (06-18),
A7 (10-18), A8 (03-14),
Q5 (08-17), Q7 (06-15), SQ5 (13-15)
Compatible for VW: Phaeton (04-14), Touareg (05-14)
Engine codes:
2.7 TDI V6: BBP, BSG, CAMA, CAMB, CANA, CANC, CAND, CGKA, CGKB
3.0 TDI V6: ASB, BKN, BKS, BMK, BNG, BUG, BUN, BWA, BWE, BWJ, BWT, BYD, BYK, BZC, CAPA, CARA, CASA, CASB, CASC, CASD, CATA, CCLA, CCMA, CCWA, CCWB, CDLA, CDLB, CDLC, CDLD, CDLF, CDMA, CDTA, CDTB, CDUC, CDYA, CDYB, CDYC, CEXA, CGQB, CJGA, CJGC, CJGD, CJMA, CKVB, CKVC, CLAA, CLAB, CLZB, CNRB, CPNB, CRCA, CRTD, CRTE, CRTF, CTBA, CTBC, CTBB, CTCC
4.0 TDI V8: ASE
4.2 TDI V8: BTB, BVN, CCFA, CCFC, CDSB, CKDA

OEM#: T40049, T40058, T40060, T40061, T40062, T40064, T40071, T40135, T40237, T40245, T40246, 3242, 3359.

Made in China

M18x2.5 Spindle for Press and Pull Sleeve Kit, 50092-5

Pulling spindle with nuts and thrust bearings.

Size: M18x2.5 mm

Length: 350 mm

Material: carbon steel

Made in China

Small mouth pull clamp, 113-01017A

Suitable for use in confined spaces.
One-way direction  of work.

Bolt size: 16 mm x 70 mmL
Capacity: 5 t
Zinc plated. Corrosion resistant.

Made in Taiwan

Introducing the Left Handed Thrust Bolt 50071, a must-have tool for specific vehicle models.

• Compatible with Renault, Espace, Citroen C5, Ford Mondeo, and Mazda.
• Expertly manufactured in China, ensuring quality and precision.
• Designed for efficient and effective performance.

10 mm 1/2" Dr. Stud Extractor, 50922-10

Designed for removing studs without damaging the threads.
Safe clamping due to 3 rollers. The extractors are the concentric roller bearing type that won't damage the thread on the stud.
Material: Cr-V
1/2" Drive (Hex 21mm).
Size: 10 mm.

Made in China

Camshaft Adjustment tool set - VAG 3.0 / 2.9 TFSI (EA839), 51063

Designed for removal and installation of the central valve on the camshaft adjuster.
Suitable for VAG 6-cilynder 3.0/2.9 4-valve TFSI (EA839) petrol engines.
Application:
VW: Touareg III (2018-)
Audi: A6 (2019-); A7 (2018-); Q7 (2019-); Q8 (2019-); S4 (2016-); S5 (2016-); SQ5 (2017-); RS4 (2017-); RS5 (2017-)
Engine codes: CWGD, DECA, CZSA, CZSE, DLZA, DCBD, DCBE.

OEM No. T90000; T90001; T90002

Made in China

M160x2.5 Spindle for Press and Pull Sleeve Kit, 50092-4

Pulling spindle with nuts and thrust bearings.

Size: M16x2.5 mm

Length: 350 mm

Material: carbon steel

Made in China

3 pcs Universal Impact joints, 50468

Full 360 degree swivel feature allows use to easily access odd angles and hard to reach areas.
Made of heat treated black chrome steel for outstanding durability and durability when working with pneumatic tools.
Material: Cr-Mo
Size: 1/4 "Dr., 3/8" Dr., 1/2 "Dr.

Made in China

9 pcs Panel beating set, 50926

Made of high-grade high-carbon steel.
It contains 4 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
N.W. : 9.7 kgs

Made in: China