INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
BMW N13, N20, N26, N55 - Valve Pressure Spring Tool 50592
BMW N13, N20, N26, N55 - Valve Pressure Spring Tool 50592
Designed to remove and install the pressure spring on intermediate lever.
Easy To Remove and Install Valve Spring
A must have for changing valvetronic camshaft bearings and camshaft.
Compatible with BMW N13, N20, N26, N51, N52, N53, N54, N55 Engines
Applicable:
BMW - 135i (2011 - 2013); BMW - 135is (2013 - 2013);
BMW - 325i (2006 - 2006); BMW - 325xi (2006 - 2006);
BMW - 330i (2006 - 2011 ); BMW - 330xi (2006 - 2011);
BMW - 335Cic (2011 - 2012); BMW - 335i (2011 - 2014);
BMW - 335xi (2011 - 2012); BMW - 525i (2006 - 2007);
BMW - 525xi (2006 - 2007); BMW - 530i (2006 - 2007 );
BMW - 530xi (2006 - 2007 ); BMW - 535i (2011 - 2014);
BMW - 640i (2012 - 2014); BMW - X1 xDrive 35i (2013 - 2014 );
BMW - X3 xDrive 35i (2011 - 2014 ); BMW - X5 xDrive 35i (2011 - 2014 );
BMW - Z4 3.0i (2006 - 2008 ); BMW - Z4 3.0si (2006 - 2008).
EM#: 11 7 110.
Made in China
M16x2.5 Spindle for Press and Pull Sleeve Kit, 50093-4
M16x2.5 Spindle for Press and Pull Sleeve Kit, 50093-4
Pulling spindle with nuts and thrust bearings.
Size: M16x2.5 mm
Length: 450 mm
Material: carbon steel
Made in China
3/4" Dr. 17 mm 12-pt Impact deep socket, 50479
3/4" Dr. 17 mm 12-pt Impact deep socket, 50479
Material: Cr-Mo
12-points
Deep: 110 mm
Applicable: For Mercedes trucks cylinder head screw.
For models MB400, MB420, MB500
Made in China
10 ton Hydraulic gear jaw bearing separator puller kit, 50457
10 ton Hydraulic gear jaw bearing separator puller kit, 50457
Features:
Multifunctional gearbox for removal of gears and bearings. Included in the kit are separator and three size brackets for three-ball bearings. It is suitable for a wide range of vehicles.
Contents:
10 Ton Hydraulic Ram
Twin Head Adapter for using as a 2 jaw puller
Triple Head Adapter for using as a 3 jaw puller
Two-way Cross Beam
3 x Gear Puller Legs/Jaws 100mm (4'')
3 x Gear Puller Legs/Jaws 150mm (6'')
3 x Gear Puller Legs/Jaws 200mm (8'')
2 x Main Rods
2 x Extension Rods
Center Extension Adapters 20 - 35 - 85mm
Bearing Separator 75-105 mm ...
9 pcs Panel beating set, 50926
9 pcs Panel beating set, 50926
Made of high-grade high-carbon steel.
It contains 4 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
N.W. : 9.7 kgs
Made in: China
Brake Piston Wind Back Tool, 50066
Brake Piston Wind Back Tool, 50066
Specifications:
Chemically blackened steel spreader plates
Suitable for most ATE, Bendix, Delco, Brembe and Girling calipers
Fitted with tommy bar
Chrome screw with linking bar
Capacity: 0 ~ 2.5" (0 ~ 65mm)
Applications: Alfa, Audi, Fiat, Ford, Nissan, GM (Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche. The list is endless...
MINI N12, N16, N18 - Valve Pressure Spring Remover and Installer Set, 50589
MINI N12, N16, N18 - Valve Pressure Spring Remover and Installer Set, 50589
Features: Designed to remove and install the pressure spring on intermediate lever.
Application:
MINI: Clubman, Clubvan, Countryman, Cooper, Coupé, Mini One, Paceman, Roadster.
Citroen: C3, C3 Picasso, C4, C4 Picasso, C5, DS3, DS4, DS5.
Peugeot: 207, 208, 3008, 308, 5008, 508, RCZ, Partner.
Engine codes:
MINI: N12, N16, N18
PSA: EP6, EP6CDT, EP6CDTM
OEM tools: 11 9 571/0197-3B1, 11 9 572/0197-3B2.
Made in China
M14x2.0 Spindle for Press and Pull Sleeve Kit, 50093-3
M14x2.0 Spindle for Press and Pull Sleeve Kit, 50093-3
Pulling spindle with nuts and thrust bearings.
Size: M14x2.0 mm
Length: 450 mm
Material: carbon steel
Made in China
6 pcs 3/4" Dr. Impact deep socket, 50476
6 pcs 3/4" Dr. Impact deep socket, 50476
Material: Cr-Mo
Contents:
3/4" Dr. TORX Impact deep socket : E18, E20, E22, E24
3/4” Dr. 12-pt Impact deep socket: 17 mm, 19 mm
Made in China
7 pcs Auto body repair set, 50209
7 pcs Auto body repair set, 50209
Made of high-grade high-carbon steel.
It contains 3 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
Contains:
1pc standard bumping hammer
1pc pick and finish hammer
1pc reverse curve hammer
1pc curved dolly
1pc utility dolly
1pc double end hand dolly
1pc shrinking dolly.
Made in China
Left handed thrust bolt, 50071
Introducing the Left Handed Thrust Bolt 50071, a must-have tool for specific vehicle models.
- Compatible with Renault, Espace, Citroen C5, Ford Mondeo, and Mazda.
- Expertly manufactured in China, ensuring quality and precision.
- Designed for efficient and effective performance.
Vacuum Oil and Fluid Extractor, 50546
Vacuum Oil and Fluid Extractor, 50546
Suitable for the extraction of engine oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. Also suitable for low viscosity fluids such as water.
Do not use with petrol or other flammable liquids.
Tank base for feet to step on to stabilize the tank while pumping.
Capacity 5.5L.
Made in China
M12x2.0 Spindle for Press and Pull Sleeve Kit, 50093-2
M12x2.0 Spindle for Press and Pull Sleeve Kit, 50093-2
Pulling spindle with nuts and thrust bearings.
Size: M12x2.0 mm
Length: 450 mm
Material: carbon steel
Made in China
6 Pcs Torx 1/2" Dr. Impact Socket Set, 50067
6 Pcs Torx 1/2" Dr. Impact Socket Set, 50067
Materal: Cr-Mo steel
Length: 44 mm
Size: T55, T60, T70, T80, T90, T100
Made in China
4 pcs Door service set, 211-0050
4 pcs Door service set, 211-0050
4 pc set: to quickly and efficiently remove doors panels, upholstery, door clips, door windows, windshield molding and more
The door panel disassembly kit contents:
- a tool for removing the door handle,
- two tools for removing the door panels,
- rivet and clip removal tool.
The set has a wide range of applications.Excellent value: an essential tool for the shop or weekend car hobbyist, no need to buy multiple tools - this kit does it all
Made in Taiwan
