INSTRUMENTS

4" (102 mm) Replacement stone, 530-0100-0123-М4

Size: 4" (102 mm)

3 pcs set, for Standard engine cylinder hone 530-0100

Made in Taiwan

5 pcs Trim fastener and molding removal set BD905М

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

24mm Oil Filter Wrench For DSG Gear Oil Change, 50845
 
Features: For operation of the oil filter housing cover when changing the oil filter insert on the DSG gearbox.
Applicable: VW and VAG group vehicles.
No removal of batteries or battery holders.
VW specification: DSG oil change within the inspection interval.
Drive: Square, 1/2".
Output: Outside 12-point profile.
Wrench size: 24mm.
Length: 199 mm.

Made in China

2" Cylinder Hone Three arms, 50719

Suitable for small brake cylinders.
With three arms
Stone size: 50 mm
Capacity: ø32 - 88 mm (1-1/4” – 3-1/2”)

Made in China

28 pcs Press and sleeve master kit, 50605

Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmerrings, ect.

Universal use for automobile, truck, municipally, country and forestery technology, ect.

Contents:
4 x step discs
4 x pulling spindle and nuts
8 x thrust bolts M10, M12, M14, M16,
20 x pressure sleeves:
Ø 44x34 mm; Ø 46x36 mm; Ø 48x38 mm;
Ø 50x40 mm; Ø 52x42 mm; Ø 54x44 mm; Ø 56x46 mm; Ø 58x48 mm
Ø 60x50 mm; Ø 62x52 mm; Ø 64x54 mm; Ø 66x56 mm; Ø 68x58 mm
Ø 70x60 mm; Ø 72x62 mm; Ø 74x64 mm; Ø 76x66 mm; Ø 78x68 mm;
Ø 80x70 mm; Ø 82x72 mm

Made in China

5 pcs Trim fastener and molding removal set

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

9 pcs 3/8" & 1/2" Triple square drive tool set S64H5109S

Contents:

7 pcs - 12-pt - 3/8": M4, M5, M6, M8, M10, M12, M14 - L-100 mm

2 pcs - 12 pt. - 1/2": M16, M18 - L-100 mm

Code: 53384

Mercedes-Benz OM654 - Engine Timing Tool Set, 51106

Applicable: A Class (from 2019), B Class (from 2019), C Class (from 2018), CLA (from 2019), CLS (from 2018), E Class (from 2016), GLB (from 2019), GLC Coupe (from 2019), GLE (from 2019), V Class (from 2019) and Vito (from 2019).

Engine codes: 1.6L 654.916 and 2.0L 654.920.

OEM No.: W654 589 00 40 00, W654 589 01 40 00 and W654 589 00 21 00.

Made in China

16 Pcs Bearing extractor set with slidding hammer, 50148

For removal of Pilot Bushes Bearings etc.
Form blind housings.
One Slide hammer assemble 2.5 jaws.
Made of ultra strong Cr-Mo material
For proffesional use.
Specification:
Thread: M10×1.5; M10×1.5 to M8×1.25, M10×1.5 to M6×1.0
Collects size: 6-13mm; 10-17mm; 15.5-22mm; 22-29mm; 28.5-35mm; 35.5-39mm; 38.5-45mm; 42.5-49mm; 48.5-55mm; 52.5-59mm
Contents:
1x Sliding Hammer Assy
1x 2 Claw Puller Assy
3x Screw Adaptors
10 X Collects
1 X Counter Stay Puller

Made in China

2" Replacement stones for Cylinder Hone, 50720

3 pcs set, for Standard engine cylinder hone

Hone lenght: 50 mm

Made in China

5 pcs Trim fastener and molding removal set, 50241

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

108 pcs 1/2" & 1/4" 41082 Combination set, 41085-5

Contents:
1. 1/4" :
13-6pt. Flan ksocket: 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm.
8-6pt. Flankdeep socket: 6; 7; 8; 9; 10; 11; 12; 13; (50 mm L)
5-Torx socket: Е4; Е5; Е6; Е7; Е8
18 Socket bit(32 mm L) :
- hex : 3; 4; 5; 6
- star : Т8; Т10; Т15; Т20; Т25; Т27; Т30
- slotted : 4; 5.5; 6.5
- phillips : PH1; PH2
- pozidriv : PZ1; PZ2
- Ratchet handle1/4" DR.
- Sliding T-bar 1/4"
- Universal joint1/4"
- Spinner 1/4"
- Extension bar1/4"2”(50 mm)
- Extension bar1/4"4”(100 mm
- Hex key : 1.5; 2; 2.5 mm

2. 1/2":
17-6pt. Flank socket: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; (32 mmL)
5-6pt. Flank deep socket: 14; 15; 17; 19; 22; (77 mmL)
2- Spark plug socket: 16; 20.6mm 5/16"
17- 5/16” Bit (30mmL) :
- hex : 7; 8; 10; 12; 14 mm
- star : Т40; Т45; Т50; Т55; Т60
- slotted : 8; 10; 12
- phillips : PH3; PH4
- pozidriv : PZ3; PZ4
8-1/2” Torx socket: Е10, Е11; Е12, Е14; Е16; Е18; Е20; Е24
Ratchet handle 1/2"
Wobble Extensionbar 5” (125 mm)
Extension bar10”(250 mm)
Universal joint1/2"
Adaptor for extension3/8” (F) x1/2" (M)
Bit holder(1/2"DR.х5/16")

Made in Taiwan

10 pcs Motorcycle Flywheel Puller Set, 60023

A set of flywheel pullers used for separating the flywheel from the crankshaft taper.
Contents:
5 double ended pullers with sizes:
M28 x M26 (1.0 mm thread),
 M25 (1.25 mm) x M22 (1.0 mm),
M27 x M24 (LH) (1.0 mm),
M26 x M22 (1.5 mm),
M27 (1.25 mm) x M20 (1.0 mm)
2 single ended puller:
M28 x 1.5 mm,
M19 x 1.0 mm
Threaded bolts: M14 x 1.5 mm, M16 x 1.5 mm, M18 x 1.5 mm

Made in China

17 Pcs Bearing and Seal Driver Set, 50147

Features:
It is only suitable for small bearings with a light press fit. e.g. bicycle wheels, alternator, washing machine, electric motors etc.
The tool is Not An Extractor, just an installer. For bearing removal needed another tool .
This comprehensive set allows the user to insert wheel bearing race and seals easier without damaging the race and axle housing.
Fits most standard bushing/wheel bearings.
Simply turn discs over to drive seals.
Material: Aluminium
Set includes the following sizes (small end diameter x large end diameter):
10mm x 12mm; 12mm x 14mm; 14mm x 16mm; 15mm x 17mm; 16mm x 18mm; 18mm x 20mm; 20mm x 22mm; 22mm x 24mm; 25mm x 27mm; 28mm x 30mm; 30mm x 34mm; 32mm x 36mm; 35mm x 40mm; 38mm x 42mm

Made in China

1-1/8" Cylinder Hone Three arms ø20-64mm, 50717

With three legs
Suitable for small brake cylinders.
Stone size: 28.5 mm (1-1/8”)
Capacity: ø20-64 mm (3/4” – 2-1/2”)

Made in China