INSTRUMENTS

5 pcs Trim fastener and molding removal set

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

108 pcs 1/2" & 1/4" 41082 Combination set, 41085-5

Contents:
1. 1/4" :
13-6pt. Flan ksocket: 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm.
8-6pt. Flankdeep socket: 6; 7; 8; 9; 10; 11; 12; 13; (50 mm L)
5-Torx socket: Е4; Е5; Е6; Е7; Е8
18 Socket bit(32 mm L) :
- hex : 3; 4; 5; 6
- star : Т8; Т10; Т15; Т20; Т25; Т27; Т30
- slotted : 4; 5.5; 6.5
- phillips : PH1; PH2
- pozidriv : PZ1; PZ2
- Ratchet handle1/4" DR.
- Sliding T-bar 1/4"
- Universal joint1/4"
- Spinner 1/4"
- Extension bar1/4"2”(50 mm)
- Extension bar1/4"4”(100 mm
- Hex key : 1.5; 2; 2.5 mm

2. 1/2":
17-6pt. Flank socket: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; (32 mmL)
5-6pt. Flank deep socket: 14; 15; 17; 19; 22; (77 mmL)
2- Spark plug socket: 16; 20.6mm 5/16"
17- 5/16” Bit (30mmL) :
- hex : 7; 8; 10; 12; 14 mm
- star : Т40; Т45; Т50; Т55; Т60
- slotted : 8; 10; 12
- phillips : PH3; PH4
- pozidriv : PZ3; PZ4
8-1/2” Torx socket: Е10, Е11; Е12, Е14; Е16; Е18; Е20; Е24
Ratchet handle 1/2"
Wobble Extensionbar 5” (125 mm)
Extension bar10”(250 mm)
Universal joint1/2"
Adaptor for extension3/8” (F) x1/2" (M)
Bit holder(1/2"DR.х5/16")

Made in Taiwan

VAG DSG 0AM - Assembly Lever and Guide Pins, 50796

Features: Used to operate the engaging lever when removing and installing the mechatronic unit on 7-speed dual clutch gearbox DSG 0AM.
The guide pins ensure straight mounting of the mechatronic unit.
Applications:
Audi: A1 (2010-2018), A3 (2003-2012), TT (2006-2015)
Seat: Altea (2004-2015), Ibiza (2008-2017), Leon (2005-2012), Toledo (2004-2009)
Skoda: Fabia (2007-2014), Octavia (2004-2013), Rapid (2012-2020), Roomster (2006-2015), Superb (2008-2015), Yeti (2009-2017)
Volkswagen: Caddy (2004-2020), Golf Plus (2005-2014), Golf V (2003-2009), Golf VI (2008-2012), Jetta III (2005-2011), Jetta IV (2011-), New Beetle (2011-2019), Passat (2005-2010), Passat (2010-2014), Polo (2009-2017), Scirocco (2008-2014), Touran (2003-2010), Touran (2010-2015)

OEM#: T10407, T10406

Made in China

Pneumatic CV Joint Boot Inastallation tool, 50425

It is used for mounting elastic CV boots without removing drive shafts from the vehicle or the CV joint from the drive shaft.
Used with air compressor.
Suitable for rubber bellows. The tool is not suitable for PVC boots.
 Diameter of the boot: 20 - 110 mm
Material: Aluminum steel
Maximum pressure: 8 Bar (116 Psi)
Air Inlet: 1/4 "

Made in China

2" Replacement stones for Cylinder Hone, 50720

3 pcs set, for Standard engine cylinder hone

Hone lenght: 50 mm

Made in China

5 pcs Trim fastener and molding removal set, 50241

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

1 Litre Solvent Pressure Sprayer 51174

Designed for various liquids containing organic solvents, such as brake cleaner (ACETONE-FREE), degreaser, tyre shine, detergents and specialised lubricants, etc.
Suitable for liquids with a PH-value from 3 to 9.
With FKM seals and gaskets. FKM is a type of synthetic rubber known for its exceptional resistance to heat, chemicals, and oils.
Bottle material: High-density polyethylene (HDPE).
Pump material: Polypropylene (PP).
Max. operating pressure: 3 bar.
Max. operating temperature: 40 °C
Max. flow rate: 300 ml/min.
Capacity: 1 Liter.

Made in China

Mercedes-Benz Ignition Lock Removal Tool, 50765

Features: Designed to remove and replace ignition switch trim ring.
Applicable: Mercedes-Benz W129, W140, W202, W210, W220, W203, W209, W211, W204

Made in China

2 pcs Heavy Duty Spring coil compressor kit, 50168

Features adjustable safety bar for additional security and compressors have lower safety jaws for ultimate peace of mind.
Hook engage spring can be compressed by turning hex nut.
Maximum capacity per pair: 1200kg.
Use with 19mm hex socket or wrench. 
Jaws capacity: 23mm-280mm.
Length 280mm.
Made of durable material for added strength.

Made in China

1-1/8" Cylinder Hone Three arms ø20-64mm, 50717

With three legs
Suitable for small brake cylinders.
Stone size: 28.5 mm (1-1/8”)
Capacity: ø20-64 mm (3/4” – 2-1/2”)

Made in China

Air vacuum dent puller with pads

Pneumatic tool for repairing small dents on the vehicle compartment. Does not damage paint and detail. Fast and accurate.
Contains:
Pneumatic gun with stainless steel housing and PVC protectors
10 pcs. changing pads and an extension adapter.
Air Inlet: 1/4 "
Optimum working pressure: 3-10 bar

Diesel injector sealing ring puller, 50566

Features: Slide hammer action easily removes diesel injector copper ring seals
Tapered point screws into the seal, locking it to the tool
Hammer action extracts the copper ring seal even when there is carbon build up
Extracts the sealing rings from between the injector nozzle & the cylinder head without damaging the injector recess or head.
It's designed to remove of sealing rings with internal diameter 4 to 16 mm
Applicable: Ideal for Mercedes & many other diesel engines that use copper injector ring seals

Made in China

30mm Ball Joint Separator Tie Rod End Removal Puller, 50792

Used to dismount steering and suspension ball joints.
Applicable: Mazda 6, Audi, Mercedes-Benz ect.
Jaw opening: 30 mm.

Made in China

1-1/8" Cylinder Hone Twin Leg ø20-64mm, 50716

Flexible drive shaft and adjustable cutting control.
Fitted with 28.5mm(1-1/8") medium grade stones with adjustable capacity from ø20-64mm.
Suitable for small brake cylinders.