INSTRUMENTS

60-115mm Oil Filter Chain Wrench 50966

Designed for removing and installing oil filters.
Double chain provides powerful and smooth operation.
Capacity: Ø60-115mm.
1/2" Drive

Made in China

1-1/8" Cylinder Hone Twin Leg ø20-64mm, 50716

Flexible drive shaft and adjustable cutting control.
Fitted with 28.5mm(1-1/8") medium grade stones with adjustable capacity from ø20-64mm.
Suitable for small brake cylinders.

28 pcs Press and sleeve master kit, 50605

Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmerrings, ect.

Universal use for automobile, truck, municipally, country and forestery technology, ect.

Contents:
4 x step discs
4 x pulling spindle and nuts
8 x thrust bolts M10, M12, M14, M16,
20 x pressure sleeves:
Ø 44x34 mm; Ø 46x36 mm; Ø 48x38 mm;
Ø 50x40 mm; Ø 52x42 mm; Ø 54x44 mm; Ø 56x46 mm; Ø 58x48 mm
Ø 60x50 mm; Ø 62x52 mm; Ø 64x54 mm; Ø 66x56 mm; Ø 68x58 mm
Ø 70x60 mm; Ø 72x62 mm; Ø 74x64 mm; Ø 76x66 mm; Ø 78x68 mm;
Ø 80x70 mm; Ø 82x72 mm

Made in China

Number punch set 6 mm, 9110014

9 pcs 3/8" & 1/2" Triple square drive tool set S64H5109S

Contents:

7 pcs - 12-pt - 3/8": M4, M5, M6, M8, M10, M12, M14 - L-100 mm

2 pcs - 12 pt. - 1/2": M16, M18 - L-100 mm

Code: 53384

Professional 24mm deep socket with a narrow lateral slot, designed for the safe removal and installation of oxygen sensors. The narrow slot design provides maximum socket strength while protecting the sensor wiring.

TDC Position Adapter M12× 1.25, 50527

For spark plug with M12x1,25 bore thread, for Ø8 mm diameter indicators.
Features:
Indicator socket diameter: Ø8 mm (d8).
Length of adapter stem: 25 mm
Spark plug hole thread: M12x1.25
Total length of adapter: 275 mm
Original tool numbers Alfa, Fiat, Lancia: 1860901000; 1871008400.

Made in China

16 Pcs Bearing extractor set with slidding hammer, 50148

For removal of Pilot Bushes Bearings etc.
Form blind housings.
One Slide hammer assemble 2.5 jaws.
Made of ultra strong Cr-Mo material
For proffesional use.
Specification:
Thread: M10×1.5; M10×1.5 to M8×1.25, M10×1.5 to M6×1.0
Collects size: 6-13mm; 10-17mm; 15.5-22mm; 22-29mm; 28.5-35mm; 35.5-39mm; 38.5-45mm; 42.5-49mm; 48.5-55mm; 52.5-59mm
Contents:
1x Sliding Hammer Assy
1x 2 Claw Puller Assy
3x Screw Adaptors
10 X Collects
1 X Counter Stay Puller

Made in China

Number punch set 8 mm, 9110018

1-1/8" Replacement stones for Cylinder Hone, 50718

3 pcs set, for Standard engine cylinder hone

Made in China

108 pcs 1/2" & 1/4" 41082 Combination set, 41085-5

Contents:
1. 1/4" :
13-6pt. Flan ksocket: 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm.
8-6pt. Flankdeep socket: 6; 7; 8; 9; 10; 11; 12; 13; (50 mm L)
5-Torx socket: Е4; Е5; Е6; Е7; Е8
18 Socket bit(32 mm L) :
- hex : 3; 4; 5; 6
- star : Т8; Т10; Т15; Т20; Т25; Т27; Т30
- slotted : 4; 5.5; 6.5
- phillips : PH1; PH2
- pozidriv : PZ1; PZ2
- Ratchet handle1/4" DR.
- Sliding T-bar 1/4"
- Universal joint1/4"
- Spinner 1/4"
- Extension bar1/4"2”(50 mm)
- Extension bar1/4"4”(100 mm
- Hex key : 1.5; 2; 2.5 mm

2. 1/2":
17-6pt. Flank socket: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; (32 mmL)
5-6pt. Flank deep socket: 14; 15; 17; 19; 22; (77 mmL)
2- Spark plug socket: 16; 20.6mm 5/16"
17- 5/16” Bit (30mmL) :
- hex : 7; 8; 10; 12; 14 mm
- star : Т40; Т45; Т50; Т55; Т60
- slotted : 8; 10; 12
- phillips : PH3; PH4
- pozidriv : PZ3; PZ4
8-1/2” Torx socket: Е10, Е11; Е12, Е14; Е16; Е18; Е20; Е24
Ratchet handle 1/2"
Wobble Extensionbar 5” (125 mm)
Extension bar10”(250 mm)
Universal joint1/2"
Adaptor for extension3/8” (F) x1/2" (M)
Bit holder(1/2"DR.х5/16")

Made in Taiwan

Professional 24mm deep socket with a 1/2" drive, specifically designed for the removal and installation of oxygen (lambda) sensors. The wide lateral slot allows the socket to fit over the sensor's wiring without causing damage.

17 Pcs Bearing and Seal Driver Set, 50147

Features:
It is only suitable for small bearings with a light press fit. e.g. bicycle wheels, alternator, washing machine, electric motors etc.
The tool is Not An Extractor, just an installer. For bearing removal needed another tool .
This comprehensive set allows the user to insert wheel bearing race and seals easier without damaging the race and axle housing.
Fits most standard bushing/wheel bearings.
Simply turn discs over to drive seals.
Material: Aluminium
Set includes the following sizes (small end diameter x large end diameter):
10mm x 12mm; 12mm x 14mm; 14mm x 16mm; 15mm x 17mm; 16mm x 18mm; 18mm x 20mm; 20mm x 22mm; 22mm x 24mm; 25mm x 27mm; 28mm x 30mm; 30mm x 34mm; 32mm x 36mm; 35mm x 40mm; 38mm x 42mm

Made in China

Auto body repair pull clamp (Two way), 62502

- Two direction action
- Cross capacity: 2 tons
- Longitudinal capacity: 5 tons

Made in Force, Taiwan

Brake spring pliers, 9B0102

- Designed for professional mechanics to remove and replace springs
- Thin narrow points with "Straight-In-Line"pull on spring
- Inclides special socket for application on all hudraulic brakes.