INSTRUMENTS

32mm Universal ball joint separator, 50050

This tool is used to separate the ball joint from the spindle support arm
Jaw size: 32 mm
Max Jaw opening: 85mm

Made in China

Auto body repair pull clamp (Two way), 62502

- Two direction action
- Cross capacity: 2 tons
- Longitudinal capacity: 5 tons

Made in Force, Taiwan

Drum brake spring pliers 9B0101

• One end hook on the spring, the ting cap with hooks grips.
• On the lining fastened to the brake shoe.
• Use for two brake return spring system.
• Can use for most of the commerial and industrial vehicles.

BMW Drive Shaft and Differential Flange Nut Tool Set, 51019

Features:
For removing and installing of the drive shaft nut allows inserting of the rear differential pinon seal suitable for BMW vehicles with rear and four wheel drive.
Suitable for BMW E70, E90, E91, E92 with N54 B30 engine.
Contents:
Open end spanner 50 mm - OEM # 33 5 040 – For BMW E70, E88, E90, E91, E92
Flange holding tool - OEM# 23 0 020 – For BMW E70, E82, E88, E90, E91, E92, etc.
Multi-point ring spanner 65 mm – OEM# 33 5 050 – For BMW E70, E82, E90, E91, E92, E93
Multi-point socket 34T – OEM# 3 35 060 – For BMW E70, E82, E90, E91, E92, E93
Seal ring drift – OEM# 3 35 080 - For BMW differential: HAG 215 Sp, HAG 220kom, HAG 225kom, HAG type G

OEM#: 33 5 040, 33 5 050, 33 5 060, 33 5 080, 23 0 020

Made in China

20 mm Universal ball joint separator, 50032

This tool is used to separate the ball joint from the spindle support arm
Applicable:  Audi, BMW, Ford, Honda, Mercedes-Benz, Nissan, Opel, Renault, Seat, Skoda, Toyota, Volkswagen and Volvo.
Adjustable for Different Size Ball Joints
Jaw open: 20mm
1-1/8" & 2-1/8" (30 - 56 mm) Maximum Opening Capacity
Bolt size: M16
Use with 19mm wrench

Made in China

Auto body repair pull clamp, 62504

Single direction action
The two side heights of jaw surgace are not even, most suitable for narrow space application
Capacity: 3 ton

Made in Force, Taiwan

HGV Diesel Injection Nozzle Socket, 50825

Features:
Used to install and remove the diesel injection nozzle on MAN, Mercedes-Benz and Scania commercial vehicles.
Specially designed with window, toothed end and M14x1.5 pulling force screw.
Applicable: Mercedes-Benz CRD, MAN & Scania

Made in China

VW & AUDI Strut nut socket, 50419

Features:
Suitable for the disassemble and installation of top shock retaining nut.
Used with 22mm spanner wrench.
Material: Heat treated and tempered chrome molybdenum steel (CR-MO)
Overall Length: 44mm
Applications: Most Audi & VW front wheel drive vehicles.

Made in China

Introducing the Brake Retainer Spring Compressor, 031-A641201 – your go-to tool for quick, clear, and safe brake maintenance!

This tool is designed to effortlessly remove and replace brake spring washers on most newer vehicles with 5/8"-7/8" diameter springs. Made with precision in Taiwan, this compressor ensures reliability and efficiency for all your brake servicing needs.

• Effortless Removal & Replacement: Quickly swap out brake spring washers.
• Wide Compatibility: Suitable for 5/8"-7/8" diameter springs.
• Safe Operation: Designed for clear and safe spring handling.

Auto body repair pull clamp (two way), 62505

Two way direction
The two side heights of jaw surgrace are not even, most suitable for narrow space application.
Cross capacity: 2 ton
Longitudinal capacity: 3 ton

Origin: Force, Taiwan

10 pcs 5-14mm 12-pt Flank deep socket set, 21014

Contents: 12-pt flank deep socket: 5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

Material: Cr-V

Produced by Force, Taiwan

10-25mm Armature Bearing puller 009-00AB

Features:
To disssembly cars bearing
To disassembly electric products bearings
It will not make the hook loose even if you  don't use the fixed screw.
Size specifications:
Disassembly out-wheel capacity: 10-25 mm
Diameter of screw nose: 4 mm
Hook lenght: 40 mm
Highest loading capacity: 0.6 ton
Weight: 0.2 kg

Made in: Taiwan

4 Pcs Truck Diesel Injector Socket Set, 50650

Contains:
1 pc  Hex 32mm x 70mm x 4 teeth (with M14 x 1.5 receiver thread) for Mercedes-Benz, Neoplan and Setra.
1 pc 1/2"Dr. x 72mm x 4 teeth for Mercedes-Benz.
1 pc Hex 32mm x 120mm x 4 tooth for MAN and Mercedes-Benz.
1 pc 1/2"Dr. x 120mm x 3 teeth for MAN and Mercedes-Benz.
Also suitable for some Iveco, Scania and Renault commercial vehicles.

Made in China

Wheel bearing tools – 85 mm, 50432A

The hub bearing removal and installation kit with integrated flange serves for a seamless and quick replacement of the damaged generation bearing - 2 - 85 mm on all Volkswagen vehicles (Touareg & T5 with 16 ”wheels/ suspension, Transporter, Multivan). The convenience of this kit is that it can be used in a situation without having to remove the hub damper from the car. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Feature:
All tools in the kit are heat treated for strength and durability.
With this tool kit you can easily remove the bearings and other components.
These bearings are lightweight with a built-in flange.
They are also preloaded with a retaining bracelet that secures the bearing to the hub housing.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.

https://www.youtube.com/watch?v=pequSdvAJU0&feature=youtu.be

Contents:
5 Push pins
1 Pressure plate with 5 holes
1 Pair of half shells for dismantling
1 Pair of half shells for installation
1 Dismantling plate
1 Installation plate
L Type lever