INSTRUMENTS

Hydraulic Drive Shaft Remover/Press Set, 50127

Used to press drive shafts out of wheel hubs.
For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 98-125 mm diameter circle.
Especially for glued and rusty drive shafts.
Has a 10 ton capacity.

Applicable: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.

Made in China

23 pcs Wheel Bearing removal tool kit, 50075

This set reduces the chance of damage to hub and bearing
Also suitable for removing and installing large industrial bearings

Wheel Bearing Removal Tool Set 

For Wheel Bearings on Front Wheel Drive Vehicles 

For use with Impact Tools 

Reduces Chances of  Damage to Hub and Bearings


Drive shaft: 32& 38 mm
Drift sizas: 50, 55, 60, 64, 67, 70, 72, 74, 75, 78, 82, 84, 88 mm
Made in China

1/2" Dr. Socket rail, 819420

L- 560 mm

20 pcs

Made in Taiwan, Force

Ø65mm Telescoping Inspection Mirror with LED, 51296

Inspection mirror with built-in LED light.
Impact resistant ABS frame for better mirror protection.
Swivel joint design provides improved accessibility for hard to reach areas.
Textured, ergonomic handle for superior grip and control.
Supplied with two pieces CR2032 3V batteries.
Mirror diameter: 65mm.
Adjustable Length: 275-855mm.

Made in China

55-175mm Valve Spring Compressor Multi-Valve  50853

Used to assist with the service and repair of multi-valve petrol and diesel engines with deep seated valves.
Suitable for general use on OHC, OHV and CVH engines.
Double plastic coated locking handles to keep valve springs positively compressed during work.
Jaw capacity: 55-175mm.
Throat clearance: 165mm.
Reversible jaw and adaptors.

Made in China

Windscreen cutting wires triangle shape 1104725201

Due to the pointed cutting angle of 60T his triangular cut-out wire has a particularly good cutting ability. To avoid damages to the painted car body and to the interior this cutting wire should be used mainly for cutting easily accessible bonding’s.
Triangle cross section
Thickness: 0.6mm
Length: 22.5m

Made in Taiwan

1/2" Drive Torque Wrench 20 - 120Nm, T0003

Torque range: 20 - 120Nm (14.8 - 88.6 lbf-ft)
Scale: 1.0Nm / 0.7lbf-ft.
Accuracy: ±3%.
Reversible ratchet mechanism with 72 teeth.
Aluminium knurled handle for comfort and control.
Length: 430 mm.

Made in China

54 Pcs Impact Bits Set, 50768

Material: S2 steel.
Contains:
1 Pc 3/8" Dr.×10mm adapter
1 Pc 1/2" Dr.×10mm adapter
14 Pcs Hex Bits:
30mm: 4, 5, 6, 7, 8, 10, 12mm
75mm: 4, 5, 6, 7, 8, 10, 12mm
10 Pcs Spline Bits:
30mm: M5, M6, M8, M10, M12
75mm: M5, M6, M8, M10, M12
14 Pcs Star Bits
30mm: T20, T25, T30, T40, T45, T50, T55
75mm: T20, T25, T30, T40, T45, T50, T55
14 Pcs Tamperproof Star Bits
30mm: T20, T25, T30, T40, T45, T50, T55
75mm: T20, T25, T30, T40, T45, T50, T55

Made in China

BMW - Differential Front Bush Extractor F Series, 50954

Features: This tool is used to extract and install the transversely mounted differential mounting bushing that is located in the rear subframe.
The service work can be performed on-car without the removal of the subframe.
Applicable:
BMW F01 — (2008–present) 7 Series
BMW F02 — (2009–present) 7 Series long wheelbase
BMW F04 — (2011–present) 7 Series ActiveHybrid
BMW F06 — (2011–present) 6 Series Gran Coupe/M6 Gran Coupe
BMW F07 — (2009–present) 5 Series Gran Turismo
BMW F10 — (2011–present) 5 Series Sedan/M5 Sedan
BMW F11 — (2012–present) 5 Series Touring
BMW F12 — (2011–present) 6 Series Coupe/M6 Coupe
BMW F13 — (2011–present) 6 Series Convertible/M6 Convertible
BMW F18 — (2010–present) 5 Series long wheelbase

Models: BMW F01 / F02 / F06 / F07 / F10 / F11 / F13

OEM Bush number: 33316792873

Made in China

Pneumatic Air Pressure Bleeder Kit, 50121

Features: For professional grade brake and clutch bleeding performance.
Low pressure tank (20-40psi) can be pre-charged with compressed air, making the unit fully portable.
Suitable for use on ABS systems.
Supplied with a range of cylinder adapters for European, Japanese and US vehicles.
Tank Capacity: 5l
Air Inlet: 1/4"

Made in China

150mm Plastic Magnetic Parts Bowl, 50757

Features: For holding screws and other small parts.
Strong magnetic base is covered with rubber and is fuel and oil resistant.
Material: ABS plastic for durability.
Diameter: 150mm.

Made in China

13" Internal snap ring pliers, 9420672

External

Overal lenght: 320mm

Tip size: Ø3mm

Made in China

Ball joint separator, UC62801
Heat treated drop forged steel body & bolt for long rough usage.
Spread ball joints easily where space prevents use of direct action method.
This tool seperates tie rod ends and ball joints from suspension components.
Heavy duty all metal construction.
High quality ball joint seperator suitable for cars and light commercial steering and suspension joints.

Jaw open: 19 mm

BMW N13, N20, N26, N55 - Valve Pressure Spring Tool 50592

Designed to remove and install the pressure spring on intermediate lever.
Easy To Remove and Install Valve Spring
A must have for changing valvetronic camshaft bearings and camshaft.
Compatible with BMW N13, N20, N26, N51, N52, N53, N54, N55 Engines
Applicable:
BMW - 135i (2011 - 2013); BMW - 135is (2013 - 2013);
BMW - 325i (2006 - 2006); BMW - 325xi (2006 - 2006);
BMW - 330i (2006 - 2011 ); BMW - 330xi (2006 - 2011);
BMW - 335Cic (2011 - 2012); BMW - 335i (2011 - 2014);
BMW - 335xi (2011 - 2012); BMW - 525i (2006 - 2007);
BMW - 525xi (2006 - 2007); BMW - 530i (2006 - 2007 );
BMW - 530xi (2006 - 2007 ); BMW - 535i (2011 - 2014);
BMW - 640i (2012 - 2014); BMW - X1 xDrive 35i (2013 - 2014 );
BMW - X3 xDrive 35i (2011 - 2014 ); BMW - X5 xDrive 35i (2011 - 2014 );
BMW - Z4 3.0i (2006 - 2008 ); BMW - Z4 3.0si (2006 - 2008).

EM#: 11 7 110.

Made in China

Windscreen cutting wires  square shape 1104724201

Cutting wires is particularly suitable for cutting double glue beads or a very wide layer of polyuretane.
Square cross section
Thickness: 0.6mm
Length: 22.5m

Made in Taiwan