INSTRUMENTS

Front wheel bearing tools – 72 mm, 50432

This wheel hub bearing tools kit is ideal for the damage-free fitting and disassembling  of generation-2 bearings units on all common vehicles for Audi, Seat, Skoda and for Volkswagen vehicles. The convenience of this kit is that it can be used in a situation without the need to dismantle the shock absorber with the hub from the vehicle. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Characteristics:
All the tools in the kit are heat-treated for strength and durability.
With this tool kit, you can easily remove bearings and other components.
These bearings are lightweight with a built-in mounting flange.
They are also preloaded with a retaining brace that fixes the bearing in the hub body.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.
Contents:
1 pcs Pair of half shells for dismantling (72 mm)
1 pcs Pair of half shells for installation (72 mm)
2 pairs Screws to fix the half shells
1 pcs  Dismantling plate
1 pcs Installation plate
2 pairs 5 x Bolts (72 mm - 76 mm in length , 8,1 and 11,9 mm in Diameter)
1 pcs Screw M 20 x 2,0 with nut hex drive 22 mm
1 pcs High strength ball bearing fitted spindle, 30mm drive
1 pcs Pressure plate with 8 holes, 72mm,  (122 mm in diameter, 18 mm in width)
Applicable:
For Audi A1 ( from year 2011)
For Audi A2 ( built after 2000)
For Seat Ibiza ( from 2002 )
For Skoda Fabia ( manufactured since 2000 )
For VW Fox ( from 2005 )
For VW Polo ( from 2002 )

Calipers brake pad screw socket for PORSCHE & AUDI, 9B0402

- 1/2"Dr. 10-pt. 16 mm; L:38 mm
- Applicable for removal of the calipers brake pad screw for Posche Cayenne and Audi Q7

8 pcs. 1/2"Dr. 6-pt. Flank deep socket set, C4088

Contents: 10; 13; 14; 17; 19; 21; 22; 24 mm

Material:: Cr-V

Made in Pard, Taiwan

Flexible Magnetic Pick Up Claw, 50519

Length: 24".
Magnetic power: Approx 1kgs

Made in China

HGV Diesel Injection Nozzle Socket, 50825

Features:
Used to install and remove the diesel injection nozzle on MAN, Mercedes-Benz and Scania commercial vehicles.
Specially designed with window, toothed end and M14x1.5 pulling force screw.
Applicable: Mercedes-Benz CRD, MAN & Scania

Made in China

Trim Clip Removal Pliers, 9M0101

Spring-loaded pliers for quick removing staples, clips, door panels, fascia and trim supports without damage.
Wide nose design to prevent breaking or tearing panels when undoing facings.
Easy access into confined areas, such as bumper covers.
Cushion grip handle provides additional comfort.

Made in Force, Taiwan

13 pcs 6-pt. Flank socket set S2131

Contents:

4mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm

Material: Cr-V

Origin: Pard, Taiwan

4 Pcs Truck Diesel Injector Socket Set, 50650

Contains:
1 pc  Hex 32mm x 70mm x 4 teeth (with M14 x 1.5 receiver thread) for Mercedes-Benz, Neoplan and Setra.
1 pc 1/2"Dr. x 72mm x 4 teeth for Mercedes-Benz.
1 pc Hex 32mm x 120mm x 4 tooth for MAN and Mercedes-Benz.
1 pc 1/2"Dr. x 120mm x 3 teeth for MAN and Mercedes-Benz.
Also suitable for some Iveco, Scania and Renault commercial vehicles.

Made in China

14 pcs Special vibro chisel set, 846-5047

A : 74 mm Large Flat Hammer.
B : 63 mm Large Concave Hammer.
C : 38 mm Medium Flat Hammer.
D : 1/2" Dr. Adaptor Hammer.
E : Adaptor Shaft Hammer.
F : 25 mm Hammer.
G : Track Rod Hammer.
H : 7" x 24 mm Impact ball joint separator
I : 7"x 20 mm Impact ball joint separator
J : 20 mm Flat Chisel
K : Point Chisel.
L : 38.5 mm Diameter Body Smoother Hammer.
M : 10 pcs Spare O-Rings
N : Air Hammer

Tools material: Cr-Mo

Made in Taiwan

Door upholstery tack remover HS-E3402

Description:
To removes upholstery clips in just a few seconds.
Place the tool under the edge of door panel & insert in fastener then pry up.

Made in China

11 pcs 1/4" Flank socket set (SAE), S2116-9

Contents:

5/32"; 3/16"; 7/32"; 1/4"; 9/32"; 5/16"; 11/32"; 3/8"; 7/16"; 1/2"; 9/16"

Material: Cr-V

Origin: Pard, Taiwan

Piston Ring Compressor 60-175 mm, 50091

With Safety valve Special spring steel
Ratchet type complete with hex spanner
Capacity: 60-175mm
Height: 150mm (6")

Made in China

1/2”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037А

Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axle.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm
• H: 32 mm

Made in Taiwan

12 pcs 3/8"Dr. 6-pt. Flank socket set, C3121

Contents: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22 mm

Material: Cr-V

MAde in Taiwan

10-25mm Armature Bearing puller 009-00AB

Features:
To disssembly cars bearing
To disassembly electric products bearings
It will not make the hook loose even if you  don't use the fixed screw.
Size specifications:
Disassembly out-wheel capacity: 10-25 mm
Diameter of screw nose: 4 mm
Hook lenght: 40 mm
Highest loading capacity: 0.6 ton
Weight: 0.2 kg

Made in: Taiwan