INSTRUMENTS

Mercedes-Benz Ignition Lock Removal Tool, 50765

Features: Designed to remove and replace ignition switch trim ring.
Applicable: Mercedes-Benz W129, W140, W202, W210, W220, W203, W209, W211, W204

Made in China

VW & AUDI Strut nut socket, 50419

Features:
Suitable for the disassemble and installation of top shock retaining nut.
Used with 22mm spanner wrench.
Material: Heat treated and tempered chrome molybdenum steel (CR-MO)
Overall Length: 44mm
Applications: Most Audi & VW front wheel drive vehicles.

Made in China

Calipers brake pad screw socket for PORSCHE & AUDI, 9B0402

- 1/2"Dr. 10-pt. 16 mm; L:38 mm
- Applicable for removal of the calipers brake pad screw for Posche Cayenne and Audi Q7

Door upholstery tack remover HS-E3402

Description:
To removes upholstery clips in just a few seconds.
Place the tool under the edge of door panel & insert in fastener then pry up.

Made in China

Diesel injector sealing ring puller, 50566

Features: Slide hammer action easily removes diesel injector copper ring seals
Tapered point screws into the seal, locking it to the tool
Hammer action extracts the copper ring seal even when there is carbon build up
Extracts the sealing rings from between the injector nozzle & the cylinder head without damaging the injector recess or head.
It's designed to remove of sealing rings with internal diameter 4 to 16 mm
Applicable: Ideal for Mercedes & many other diesel engines that use copper injector ring seals

Made in China

Wheel bearing tools – 85 mm, 50432A

The hub bearing removal and installation kit with integrated flange serves for a seamless and quick replacement of the damaged generation bearing - 2 - 85 mm on all Volkswagen vehicles (Touareg & T5 with 16 ”wheels/ suspension, Transporter, Multivan). The convenience of this kit is that it can be used in a situation without having to remove the hub damper from the car. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Feature:
All tools in the kit are heat treated for strength and durability.
With this tool kit you can easily remove the bearings and other components.
These bearings are lightweight with a built-in flange.
They are also preloaded with a retaining bracelet that secures the bearing to the hub housing.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.

https://www.youtube.com/watch?v=pequSdvAJU0&feature=youtu.be

Contents:
5 Push pins
1 Pressure plate with 5 holes
1 Pair of half shells for dismantling
1 Pair of half shells for installation
1 Dismantling plate
1 Installation plate
L Type lever

10 pcs 5-14mm 12-pt Flank deep socket set, 21014

Contents: 12-pt flank deep socket: 5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

Material: Cr-V

Produced by Force, Taiwan

22 mm 1/2" Dr. Twist socket, 50927-22

Designed for removing damaged nuts and bolts, and especially for locking wheel nuts.
Material: Cr-Mo
1/2" Dr.
Size: 22 mm.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

Pneumatic Injector Puller Set, 51107

Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.

.Made in China

Front wheel bearing tools – 72 mm, 50432

This wheel hub bearing tools kit is ideal for the damage-free fitting and disassembling  of generation-2 bearings units on all common vehicles for Audi, Seat, Skoda and for Volkswagen vehicles. The convenience of this kit is that it can be used in a situation without the need to dismantle the shock absorber with the hub from the vehicle. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Characteristics:
All the tools in the kit are heat-treated for strength and durability.
With this tool kit, you can easily remove bearings and other components.
These bearings are lightweight with a built-in mounting flange.
They are also preloaded with a retaining brace that fixes the bearing in the hub body.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.
Contents:
1 pcs Pair of half shells for dismantling (72 mm)
1 pcs Pair of half shells for installation (72 mm)
2 pairs Screws to fix the half shells
1 pcs  Dismantling plate
1 pcs Installation plate
2 pairs 5 x Bolts (72 mm - 76 mm in length , 8,1 and 11,9 mm in Diameter)
1 pcs Screw M 20 x 2,0 with nut hex drive 22 mm
1 pcs High strength ball bearing fitted spindle, 30mm drive
1 pcs Pressure plate with 8 holes, 72mm,  (122 mm in diameter, 18 mm in width)
Applicable:
For Audi A1 ( from year 2011)
For Audi A2 ( built after 2000)
For Seat Ibiza ( from 2002 )
For Skoda Fabia ( manufactured since 2000 )
For VW Fox ( from 2005 )
For VW Polo ( from 2002 )

10 pcs 1/2"Dr Socket set, 4106

Contet 6-pt. flank socket :  11, 12, 13, 14, 15, 17, 19, 21, 22, 24 mm

Material: Cr-V

Made in Taiwan

21 mm 1/2" Dr. Twist socket, 50927-21

Designed for removing damaged nuts and bolts, and especially for locking wheel nuts.
Material: Cr-Mo
1/2" Dr.
Size: 21 mm.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

1/2"Dr. 22mm Oxygen Sensor Socket, 51082

Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 22mm

Made in China

8 pcs. 1/2"Dr. 6-pt. Flank deep socket set, C4088

Contents: 10; 13; 14; 17; 19; 21; 22; 24 mm

Material:: Cr-V

Made in Pard, Taiwan

19 mm 1/2" Dr. Twist socket, 50927-19

Designed for removing damaged nuts and bolts, and especially for locking wheel nuts.
Material: Cr-Mo
1/2" Dr.
Size: 19 mm.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China