INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
1/2"Dr. 19mm Oxygen Sensor Socket, 51081
1/2"Dr. 19mm Oxygen Sensor Socket, 51081
Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 19mm
Made in China
14 pcs Special vibro chisel set, 846-5047
14 pcs Special vibro chisel set, 846-5047
A : 74 mm Large Flat Hammer.
B : 63 mm Large Concave Hammer.
C : 38 mm Medium Flat Hammer.
D : 1/2" Dr. Adaptor Hammer.
E : Adaptor Shaft Hammer.
F : 25 mm Hammer.
G : Track Rod Hammer.
H : 7" x 24 mm Impact ball joint separator
I : 7"x 20 mm Impact ball joint separator
J : 20 mm Flat Chisel
K : Point Chisel.
L : 38.5 mm Diameter Body Smoother Hammer.
M : 10 pcs Spare O-Rings
N : Air Hammer
Tools material: Cr-Mo
Made in Taiwan
13 pcs 6-pt. Flank socket set S2131
13 pcs 6-pt. Flank socket set S2131
Contents:
4mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm
Material: Cr-V
Origin: Pard, Taiwan
17 mm 1/2" Dr. Twist socket, 50927-17
17 mm 1/2" Dr. Twist socket, 50927-17
Designed for removing damaged nuts and bolts, and especially for locking wheel nuts.
Material: Cr-Mo
1/2" Dr.
Size: 17 mm.
THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!
Made in China
1/2"Dr. 17mm Oxygen Sensor Socket, 51080
1/2"Dr. 17mm Oxygen Sensor Socket, 51080
Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 17mm
Made in China
1/2”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037А
1/2”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037А
Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axle.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm
• H: 32 mm
Made in Taiwan
2 pc Axle puller, BR66401
2 pc Axle puller, BR66401
- central hole to screw 130mm
- drop forged
Made in Pard, Taiwan
11 pcs 1/4" Flank socket set (SAE), S2116-9
11 pcs 1/4" Flank socket set (SAE), S2116-9
Contents:
5/32"; 3/16"; 7/32"; 1/4"; 9/32"; 5/16"; 11/32"; 3/8"; 7/16"; 1/2"; 9/16"
Material: Cr-V
Origin: Pard, Taiwan
12 mm 1/2" Dr. Stud Extractor, 50922-12
12 mm 1/2" Dr. Stud Extractor, 50922-12
Designed for removing studs without damaging the threads.
Safe clamping due to 3 rollers. The extractors are the concentric roller bearing type that won't damage the thread on the stud.
Material: Cr-V
1/2" Drive (Hex 21mm).
Size: 12 mm.
Made in China
BMW Drive Shaft and Differential Flange Nut Tool Set, 51019
BMW Drive Shaft and Differential Flange Nut Tool Set, 51019
Features:
For removing and installing of the drive shaft nut allows inserting of the rear differential pinon seal suitable for BMW vehicles with rear and four wheel drive.
Suitable for BMW E70, E90, E91, E92 with N54 B30 engine.
Contents:
Open end spanner 50 mm - OEM # 33 5 040 – For BMW E70, E88, E90, E91, E92
Flange holding tool - OEM# 23 0 020 – For BMW E70, E82, E88, E90, E91, E92, etc.
Multi-point ring spanner 65 mm – OEM# 33 5 050 – For BMW E70, E82, E90, E91, E92, E93
Multi-point socket 34T – OEM# 3 35 060 – For BMW E70, E82, E90, E91, E92, E93
Seal ring drift – OEM# 3 35 080 - For BMW differential: HAG 215 Sp, HAG 220kom, HAG 225kom, HAG type G
OEM#: 33 5 040, 33 5 050, 33 5 060, 33 5 080, 23 0 020
Made in China
3/4”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037B
3/4”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037B
Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axles.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm.
• H: 60 mm
Made in Taiwan
12 pcs 3/8"Dr. 6-pt. Flank socket set, C3121
12 pcs 3/8"Dr. 6-pt. Flank socket set, C3121
Contents: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22 mm
Material: Cr-V
MAde in Taiwan
10 mm 1/2" Dr. Stud Extractor, 50922-10
10 mm 1/2" Dr. Stud Extractor, 50922-10
Designed for removing studs without damaging the threads.
Safe clamping due to 3 rollers. The extractors are the concentric roller bearing type that won't damage the thread on the stud.
Material: Cr-V
1/2" Drive (Hex 21mm).
Size: 10 mm.
Made in China
HGV Diesel Injection Nozzle Socket, 50825
HGV Diesel Injection Nozzle Socket, 50825
Features:
Used to install and remove the diesel injection nozzle on MAN, Mercedes-Benz and Scania commercial vehicles.
Specially designed with window, toothed end and M14x1.5 pulling force screw.
Applicable: Mercedes-Benz CRD, MAN & Scania
Made in China
Benz strut nut socket, 780-9002
Benz strut nut socket, 780-9002\
Features:
Specifically designed for Mercedes-Benz C Class W203
Applicable:
Mercedes-Benz C Class 2000-2008 C203 front suspension strut top nuts (Shock absorber piston rod top nut).
Also fits W209 CLK 2003-2008
Used with a 7 mm Hex key to hold strut in place whilst tightening
22 mm Hex drive
Selected steel
Made in Taiwan
