INSTRUMENTS

Professional 24mm deep socket with a narrow lateral slot, designed for the safe removal and installation of oxygen sensors. The narrow slot design provides maximum socket strength while protecting the sensor wiring.

24 PCS Engine Oil Filler Set, 51042

2 litre funnel with 6 adaptors to fit a wide range of vehicles.
Allows for fast oil filling without spillage or waste.
Great for many late model vehicles with internal baffles.
For pouring oil where access is difficult.
Angled extension and adapters are made of plastic.
Contents:
1x Bayonet Adapter for Audi, BMW, Mercedes-Benz, Porsche, Volvo, Volkswagen
1x Bayonet Adapter for Toyota, Lexus 3.0 / 3.3 V6
1x Threaded Adapter M37x3.0 for Lexus, Toyota, Scion, Pontiac Vibe
1x Threaded Adapter M35x4.0 for Ford, Jaguar, Land Rover, Mazda
1x Threaded Adapter M32x3.5 for Acura, Dodge, Ford, Honda,  Jaguar, Jeep, Land Rover, Mazda, Nissan
1x Threaded Adapter M42x4.5 for Subaru
1x Threaded Adapter M30x3.0 for Dodge, Mitsubishi, Jeep
1x Bayonet Adapter for Ford, Mazda, Land Rover
1x Bayonet Adapter for Ford, Hyundai, Jaguar, Volvo, Mazda, Volvo
1x Bayonet Adapter for Volkswagen, Audi, Seat, Skoda
1x Bayonet Adapter for Dodge 5.7 / 6.1 / 6.4 Hemi, 3.6
1x Threaded Adapter M37x3.0 for Lexus, Toyota, Scion, Pontiac Vibe
1x Bayonet Adapter for Citroën C4 2.0, Peugeot 408
1x Bayonet Adapter for Mitsubishi Pajero V73, Volvo S80
1x Bayonet Adapter for Citroën C2 1.6L, C3 XR, C4 1.6, Peugeot 307, 206
1x Bayonet Adapter for Buick New Regal and Cadillac CTS 2.7
1x Bayonet Adapter for Buick Excelle
1x Bayonet Adapter for Volvo XC90, S80
1x Bayonet Adapter for Buick Sail 1.4, 1.6, 2.0
1x Universal Adapter
1x Oil Funnel 2L
1x Elbow
1x Angled Plastic Extension
1x Drain Fitting with Pressure Reducer

Made in China

14 pcs Special vibro chisel set, 846-5047

A : 74 mm Large Flat Hammer.
B : 63 mm Large Concave Hammer.
C : 38 mm Medium Flat Hammer.
D : 1/2" Dr. Adaptor Hammer.
E : Adaptor Shaft Hammer.
F : 25 mm Hammer.
G : Track Rod Hammer.
H : 7" x 24 mm Impact ball joint separator
I : 7"x 20 mm Impact ball joint separator
J : 20 mm Flat Chisel
K : Point Chisel.
L : 38.5 mm Diameter Body Smoother Hammer.
M : 10 pcs Spare O-Rings
N : Air Hammer

Tools material: Cr-Mo

Made in Taiwan

3 pcs Axle puller BR66403

- Central hole to screw hole 110 mm
- Drop forged

Made in Pard, Taiwan

Professional 24mm deep socket with a 1/2" drive, specifically designed for the removal and installation of oxygen (lambda) sensors. The wide lateral slot allows the socket to fit over the sensor's wiring without causing damage.

20 PCS Oil Sump Drain Plug Key Set, 20019B

Suitable for sump plugs on engine, gearbox and back axle.
Contents:
Square Male Keys: 7, 8, 10, 11, 12,13, 14mm and 5/16"
Hex Keys: 8, 9, 10, 12, 14, 17mm
Square Female: 10mm
Triangular Key: 10mm PSA
Security Spline Key: M16
VAG Plastic Plug Bit
VAG Torx T45
Flexible Head Bar 200mm

Made in China

1/2”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037А

Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axle.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm
• H: 32 mm

Made in Taiwan

Description: Precision 41mm 8-point low-profile socket for servicing motorcycle front fork caps. Ideal for Big Piston Forks (BPF) by Showa. Made from durable materials to ensure a perfect fit without rounding the edges of the aluminum caps.

Purpose: Essential tool for servicing modern sportbike forks. Designed specifically for the high-torque requirements of Big Piston Fork (BPF) caps while maintaining a soft touch on the finished aluminum surfaces.

1/2” Dr. E20 Cylinder Head Wrench-Man, 50811

Features: For loosening and fastening cylinder head screws. Removing the injector no longer necessarily.
Ideally suited for commercial vehicles.
Profil: E-Torx.
Drive: Square, 1/2".
Applicable: MAN series F2000 / F90 / F8, MAN buses with D25 and D28 engines.

Made in China

3/4”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037B

Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axles.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm.
• H: 60 mm

Made in Taiwan

1/2"Dr. Pentagon deep socket 14 mm, S5477014

Overal lenght: 70 mm

For pentagon brakes on rear brake
Applicable: Opel Astra G, Zafira, Smart

Material: Cr-V

Made in Pard, Taiwan

38mm 8-point Fork Cap Socket for Showa SDBV,51381

Description: Specialized 38mm 8-point (octagon) socket designed for the safe removal and installation of front fork caps. Specifically engineered for Showa SDBV forks found on motorcycles like the Honda NC750. Prevents damage to delicate aluminum caps.

Purpose: Used for removing and installing the top fork caps on motorcycle suspension. The 8-point design ensures a precise fit on low-profile aluminum caps, preventing costly damage and scratches during maintenance.

Made in China

24mm Oil Filter Wrench For DSG Gear Oil Change, 50845
 
Features: For operation of the oil filter housing cover when changing the oil filter insert on the DSG gearbox.
Applicable: VW and VAG group vehicles.
No removal of batteries or battery holders.
VW specification: DSG oil change within the inspection interval.
Drive: Square, 1/2".
Output: Outside 12-point profile.
Wrench size: 24mm.
Length: 199 mm.

Made in China

Benz strut nut socket, 780-9002\

Features:
Specifically designed for Mercedes-Benz C Class W203
Applicable:
Mercedes-Benz C Class 2000-2008 C203 front suspension strut top nuts (Shock absorber piston rod top nut).
Also fits W209 CLK 2003-2008
Used with a 7 mm Hex key to hold strut in place whilst tightening
22 mm Hex drive
Selected steel

Made in Taiwan

19 mm 1/2"Dr. Pentagon socket, C5473819

Application: for Bendix brakes, Citroen, Peugeot, Renault

Material: Cr-V

Produced by Pard, Taiwan