INSTRUMENTS

8x10mm S-form Drain Plug Wrench, EN9U0706
S-form Drain Plug Wrench 8x10mm square
Made of chrome-vanadium steel.
Compatible with Peugeot, Renault and Volvo.
Suitable for back axle, gearbox.
Specifications:
Size: 8 - 10 mm (square)
Material: Cr-V

Made in Taiwan

11 pcs 3/8"Dr. 12-pt. Flank socket set 3111

11 pcs Bearing and seal driver set, 50130
For the installation of bearings and seals. Helps avoid damage to bearing and seal faces.
This set will provide the correct size driver for 99%, bearings, bush and oil seal installations.
The reverse side of the collar can also be used to drive seals.
Supplied with a strong blow mould case.
Ideal for car, commercial motorbike or any application that has bearings or seals.
Always drive that bearing in square and flush first time.

Piston Ring Compressor 90-175mm, EN6206175

With Safety valve

Special spring steel
Ratchet type complete with hex spanner
Capacity: 90-175mm (3 1/2"-7")
Height: 165mm (6-1/2")

Made in Taiwan

1/4"Dr. 19 pcs Socket set, 2203-5

Outer Tie Rod Remover 62814

• Two adjustable jaws special designed for removing most models of outer tie rod
• Material: SCM420 Hardened 42°
• Handles up to 5 tons of knuckle twisting force
• Jaw reach is 2-1/4" (57 mm) with a spread of 2-1/2" (64 mm)
• Jaws, once tightened, won't slip on the knuckle
• Can be used to separate lower ball joints on import FWD vehicles

Made in Force, Taiwan

Mercedes & BMW Ignition Lock Set, HS-E3417

Complete kit for removal and installation for Mercedes and BMW motor vehicles.
Stored in a plastic case.
Includes:
2pcs x Instrument cluster removal hooks for models: 107, 116, 123, 124, 126, 140 & 201.
2pcs x Radio removal tools for 1992 and newer Mercedes vehicles Models: 140, 129, 202 & 210.
2pcs x Ignition lock removal tools for models W124 & 201.
2pcs x Ignition lock removal tools for models W124, 126 & 201.

Made in China

22 Pcs 1/2"Dr. Socket set C4223

Contents:

• 6pt. Flank Socket 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 22; 24; 27; 30; 32 mm
• Ratchet handle
• Extension bar 5" ; 10" (125; 250mm)
• Spark plug socket 16 ; 20.6 mm
• Universal joint
• Adaptor for extension 3/8"(F)x1/2"(M)

Made in Taiwan

CV Joint Assembly Removal Tool, 50044

Description:
- For removing CV joints on front wheel drive cars without removing the drive shaft
- Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip
- A robust tool for front wheel drive cars
- Suitable for most vehicle
- Removes CV joints without removing drive shaft
- Time saver
- Essential service tool
- Phosphate Coated for long heavy duty service life

Combustion Gas Leak Tester Kit, 51111

Designed for testing the presence of CO² in the cooling system.
CO² in the cooling system can indicate a cylinder head gasket leak, cracked block, warped head, etc.
For use on water-cooled petrol and diesel engines.
Set contains:
1x Leak Detector
1x Rubber Bulb Pump
1x Release Valve and Connector
3x Cooling System Bayonet Adapter
2x Empty Bottle (250 ml)

Made in China

Uiversal pulley & fan clutch holder set, HS-E3407
Universal disassembly and assembly kit for the fan clutch. Used to rotate, lock and change the camshaft belt.
The kit contains a set of pins with a different size and a jaw cover of 40 - 220 mm.
Content:
Adjustable wrench 400 mm
4 Pairs interchangeable screw bolts:
Ø 6 -10 mm, Ø 8 - 11 mm, Ø 10 - 12 mm, Ø 11 - 16 mm
2 x Nuts

Made in China

4 pcs 1/2"Dr Star socket bit set, 4042

CV Joint clamp banding tool, 50690
Use to install and tighten the "band-it" or strap style clamps on CV joint boots or on power steering rack and pinion steering gear boots.
Once installed into the tool tighten the band by turning the handle on the tool;
Use a socket or wrench on the handle to torque the band to OE specifications.
When the boot clamp has been tightened to specs cut the band to the correct length by flipping the lever (at the front of the tool) forward.
Features:
CV joint boot clamp wrench securely fastens band-it style free-end clamps
Roll band clips and pre-formed CV boot clamps
Use by turning the winding mandrel with a 1/2-inch socket or wrench
Measures 11-1/2 inches long
Works on All CV Boot Clamps, ATV,  UTV and some automotive applications.