INSTRUMENTS

Manual Brake Fluid extractor 50789

Drains the brake fluid and bleeds the brake system

Tank capacity: 3l

Max. Pressure: 4.8 Bar (70Psi)

Made in China

6 Pcs Broken Screw Extractor Set, 50051

Used to remove broken screws, bolts and studs.
Material: Cr-Mo
Contents:
M3-M6 (1/8"-1/4")
M6-M8 (1/4"-5/16")
M8-M11 (5/16"-7/16")
M11-M14 (7/16"-9/16")
M14-M18 (9/16"-3/4")
M18-M25 (3/4"-1")

Made in China

11 pcs Universal Clutch Alignment Tool Kit, 50808

Suitable for a wide range of vehicle including some light commercial vehicles. Screw action provides fast adjustment for required hub diameter. Eight interchangeable spigot adaptors aid close alignment.
Contents:
3 pcs Expanding mandrels: Ø15 - 19mm, Ø20 - 26mm, Ø23 - 36mm
8 pcs Centring bushes: 12, 14, 15, 16, 17, 18, 19 and 20mm (O/D)

Made in China

22 Pcs 1/2"Dr. Socket set C4223

Contents:

• 6pt. Flank Socket 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 22; 24; 27; 30; 32 mm
• Ratchet handle
• Extension bar 5" ; 10" (125; 250mm)
• Spark plug socket 16 ; 20.6 mm
• Universal joint
• Adaptor for extension 3/8"(F)x1/2"(M)

Made in Taiwan

CV Joint Assembly Removal Tool, 50044

Description:
- For removing CV joints on front wheel drive cars without removing the drive shaft
- Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip
- A robust tool for front wheel drive cars
- Suitable for most vehicle
- Removes CV joints without removing drive shaft
- Time saver
- Essential service tool
- Phosphate Coated for long heavy duty service life

VAG 1.4 TSI Auxiliary Belt Tensioner Spanner, 50775

Specially designed spanner to allow for access to the auxiliary belt tensioner where access is limited
Used for loosening poly V-belt by turning auxiliary belt tensioner.
Jaw opening: 16mm.
Application: Audi, Seat, Škoda and Volkswagen with 1.4 TSI and TSi Blue Motion engines(1.4L 4-cylinder direct injection engine, turbocharger and supercharger).
Applicable to: Audi: A1 Sport back / 12-15 | A3 / 13-15 | A3 Sport back / 12-15.
Engine Codes : ACT | CPTA | CGGA | CHPA | CMBA | CPTA | CPVA | CRJA | CXSA
OEM No.: T10447

Made in China

4 pcs 1/2"Dr Star socket bit set, 4042

CV Joint clamp banding tool, 50690
Use to install and tighten the "band-it" or strap style clamps on CV joint boots or on power steering rack and pinion steering gear boots.
Once installed into the tool tighten the band by turning the handle on the tool;
Use a socket or wrench on the handle to torque the band to OE specifications.
When the boot clamp has been tightened to specs cut the band to the correct length by flipping the lever (at the front of the tool) forward.
Features:
CV joint boot clamp wrench securely fastens band-it style free-end clamps
Roll band clips and pre-formed CV boot clamps
Use by turning the winding mandrel with a 1/2-inch socket or wrench
Measures 11-1/2 inches long
Works on All CV Boot Clamps, ATV,  UTV and some automotive applications.

Internal snap ring pliers (Long arm), 096-7011

Special design for the retaining ring in the deep hole.
The most deep size: 56 mm

Made in Taiwan

 

Clutch Alignment Mandrels, 50681

Suitable for cars and light commercial vehicles.
Fast hub diameter adjustment achieved via screw action.
Adjustable from 15-19mm and 20-26mm diameter.

Made in China

10 pcs 1/2"Dr. Impact deep socket set, 4107

Strut spring compressor, 370 mm, 50078B
Professional tool for commercial or occasional use.
High quality set of compressors for working on struts on passenger cars and light comercials.
This listing is for one pair.
Suitable for use where there is limited space under the wheel arches.
1/2" square drive or 21mm spanner.
Extra long set will compress up to 370mm.
Twin hook design for stability.

Made in China

Air Conditioning Compressor Clutch Puller Set, 50677

Features:
Professional A/C Compressor Clutch Remover Kit.
Replaces clutches found on FS6, C171, 6P & 148 compressors GM R4 & A6, HR-6, DA-6 & V5 A/C compressors.
Sanden compressors SD505, 507, 510, 575, 708 & 709.
2 & 3 hole puller plate fits most clutches, mechanical force does the pulling.

Made in China

10 pcs 1/2"Dr. Impact socket set, 4109

Universal Strut Coil Clamp Spring Compressor Tool Set, 50074
The spring tensioner is very suitable for mounting and dismounting of the McPherson springs at the front and rear axles of many vehicle types:
BMW, Toyota, Ford, Opel, VW, Audi, Saab, Nissan, Honda, Subaru, Volvo, Mitsubishi etc.
Contents:
1 x Heavy Duty Compressor(5.2kg)
2 x 65-125mm Jaws (Use rang: 80-115mm)
2 x 88-160mm Jaws (Use rang: 110-150mm)
2 x 127-214mm Jaws (Use rang: 140-195mm)
Adjustment Block

The set is in blue case.