INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Coil spring compressor , 62701
VAG - Timing Belt Tensioner Wrench, 50669
VAG - Timing Belt Tensioner Wrench, 50669
For adjusting the timing belt at the tensioner roller.
Suitable for Audi, Volkswagen, Seat, Škoda vehicles.
Distance of pins: 18 mm
Pin diameter: 3mm
OEM#: 3387
Made in China
9pcs Pick and Hook Set, 50208
9pcs Pick and Hook Set, 50208
Features:
Suitable for pin/clip picking, hose removal and gasket scraping.
Ergonomically styled handles for comfort, grip and accuracy.
Lengths: 165mm and 260mm
Contents:
4 x Short Picks with satin finished steel shafts
4 x Large Picks with black finished steel shafts.
1 x Large Scraper with black finished steel shaft.
Material: Alloy Steel
Made in China
60 - 80mm Reversible Oil Filter Wrench, 50666
60 - 80mm Reversible Oil Filter Wrench, 50666
Features:
2 jaws with teeth provide a strong grip and are not easy to slide. The wrench can hold half of the filter for greater grip and reduce the risk of sliding if the filter is stubborn or damaged.
Reduce time-consuming disassembly and stubborn filter disassembly. Spring-loaded for easy installation and disassembly.
Is used with half bending rod or ratchet wrench.
Rigid high carbon steel with a spring that has strong elasticity and is durable..
Specification:
Special design allows the oil filter to be removed and installed quickly and easily.
Steel jaws securely grip oil filter without slipping.
Fits sizes 60mm - 80mm.
Use with 1/2" drive.
Reversible.
Made in China
BMW N-series Crankshaft Locking Tool, 50575
BMW N-series Crankshaft Locking Tool, 50575
Used to lock crankshaft when releasing or tightening the central bolt.
Suitable for BMW N12, N14, N40, N42, N45, N46, N52, N52, N53, N54 engines.
OEM#: 11 9 280
Made in China
6 Pcs Spiral Flute Screw Extractor Set, 50051A
6 Pcs Spiral Flute Screw Extractor Set, 50051A
Used to remove broken screws, bolts and studs.
Material: Cr-Mo
Contents:
M3-M6 (1/8"-1/4")
M6-M8 (1/4"-5/16")
M8-M11 (5/16"-7/16")
M11-M14 (7/16"-9/16")
M14-M18 (9/16"-3/4")
M18-M25 (3/4"-1")
Made in China
BMW N20/N26 Flywheel Locking Tool, 50570
BMW N20/N26 Flywheel Locking Tool, 50570
Description:
Great for Replacing The Timing Chain.
Works on BMW N20 and N26 engines.
Used for securing the crankshaft with the transmission installed(connected to engine)
Comparable to BMW Factory Tool No. 83302222742
(Note: Automatic transmissions only.)
Features:
While replacing the timing chain, this tool can hold the flywheel;
It helps to release and tighten down the central bolts on the vibration damper.
Application:
BMW 125i N20 2012-2017;
BMW 220i N20 2014-2018
BMW 225i N20 2014-2017
BMW 228i N20 2014-2016
BMW 320i N20 2012-2015
BMW 320i GT N20 2013-2016
BMW 328i N20 2011-2016
BMW 328i GT N20 2013-2016
BMW 520i N20 2011-2016
BMW 520Li N20 2013-2016
BMW 525Li N20 2013-2016
BMW 528i N20 2011-2017
BMW X1 xDrive/sDrive20i N20 2011-2015
BMW X1 xDrive/sDrive28i N20 2011-2015
BMW X3 N20 2013-2018
BMW X3 xDrive20i N20 2011-2018
BMW X3 xDrive28i N20 2012-2018
BMW X4 xDrive20i N20 2014-2017
BMW Z4 N20 2013-2015
BMW Z4 sDrive20i N20 2011-2016
BMW Z4 sDrive28i N20 2011-2016
BMW 328i / 328iX N26 2012-2016
BMW 228i / 228iX N26 2012-2016
Made in China
8 pcs 1/2"Dr. Impact hex bits socket (one piece), 30008B
8 pcs 1/2"Dr. Impact hex bits socket (one piece), 30008B
Size: HEX 5, 6, 8, 10, 12, 14, 17, 19
Material: CR-MO
Made in China
6 Pcs Broken Screw Extractor Set, 50051
6 Pcs Broken Screw Extractor Set, 50051
Used to remove broken screws, bolts and studs.
Material: Cr-Mo
Contents:
M3-M6 (1/8"-1/4")
M6-M8 (1/4"-5/16")
M8-M11 (5/16"-7/16")
M11-M14 (7/16"-9/16")
M14-M18 (9/16"-3/4")
M18-M25 (3/4"-1")
Made in China
VAG 1.8;2.0 TFSI Camshaft Central Valve Removal Socket Kit, 50553
VAG 1.8;2.0 TFSI Camshaft Central Valve Removal Socket Kit, 50553
Description: Used for removal and installation of 4/3-way central valve for camshaft adjustment on 1.8 & 2.0 generation III TFSI engines..5 sizes with unique 2-pin positions. All with 3/8" square drive. Same as tool #T10352 special tools for VW AUDI Q5 2.0T MAGOTAN positive CC timing T10352/1 B8 A6L A8"
Applications:
Audi A3 with 4-cylinder gas direct injection, 1.8 liter, 2.0 liter ,4v, TFSI engine with chain. Passat 2006>, Passat CC 2009>, Audi A3 2004> 4-cyl. injection engine (1.8 liter and 2.0 liter engine, chain drive). Audi A4 2008 >, Audi A5 Cabriolet 2009 >, Audi A5 Coupe 2008 >, Audi Q5 2008 >, Audi A3 2012. 4-cyl. 1.8l, 2.0l 4V TFSI direct injection engine- generation II
OEM No. T10352, T10352/1, T10352/2, T10352/3, T10352/4
Made in China
9 pcs 1/2"Dr Torx impact bits socket set, 30009B
9 pcs 1/2"Dr Torx impact bits socket set, 30009B
Size: Т20, Т25, Т30, Т40, Т45, Т50, Т55, Т60, Т70
Material: CR-MO
Made in China
VW 1.8; 2.0 TFSI Camshaft Locking Tool, 50522
VW 1.8; 2.0 TFSI Camshaft Locking Tool, 50522
Description:
The camshaft sprockets locking tool is used for locking the intake and exhaust camshafts when loosening the central screw.
Application: VW 1.8 TFSI / 2.0 TFSI
Engine code : CABD, CAEA, CDNB, CDNA, CAWA, CBFA, CCTA, CCZA, CAEB, CDNC, CDHA, CABA, BYT, BZB, CDAA, CABB, CDHB
Made in China
9 pcs 1/2"Dr Spline Impact bits socket (one piece), 30009
9 pcs 1/2"Dr Spline Impact bits socket (one piece), 30009
Spline size: М4, М5, М6, М8, М9, М10, М12, М14, М16
Material: CR-MO
Made in China ...
Front axle upper ball joint extractor installer VW T4, 50463
Front axle upper ball joint extractor installer VW T4, 50463
Suitable for removing and installing the upper front ball joint in situation without the need to disassemble.
Features a variety of adaptors used in different combinations for extracting and installing.
Applicable: VW; T4 2000 CC, T4 2500 CC
Made in China
9 pcs 1/2"Dr Ribe impact bits socket set, 30009A
9 pcs 1/2"Dr Ribe impact bits socket set, 30009A
Spline size: M5, M6, M7, M8, M9, M10, M12, M13, M14
Material: CR-MO
Made in China ...
