INSTRUMENTS

Puller with 2 slim legs, 210-04267B

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel slin legs.
Capacity: 0-45mm
P: 40mm
N.W. 0.350 kgs

Made in Taiwan

Code: 533043

60 - 80mm Reversible Oil Filter Wrench, 50666

Features:
2 jaws with teeth provide a strong grip and are not easy to slide. The wrench can hold half of the filter for greater grip and reduce the risk of sliding if the filter is stubborn or damaged.
Reduce time-consuming disassembly and stubborn filter disassembly. Spring-loaded for easy installation and disassembly.
Is used with half bending rod or ratchet wrench.
Rigid high carbon steel with a spring that has strong elasticity and is durable..
Specification:
Special design allows the oil filter to be removed and installed quickly and easily.
Steel jaws securely grip oil filter without slipping.
Fits sizes 60mm - 80mm.
Use with 1/2" drive.
Reversible.

Made in China

Puller with 2 slim legs, 210-04267A

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel slin legs.
Capacity: 0-35mm
P: 40mm
N.W. 0.300kgs

Made in Taiwan

BMW N-series Crankshaft Locking Tool, 50575

Used to lock crankshaft when releasing or tightening the central bolt.
Suitable for BMW N12, N14, N40, N42, N45, N46, N52, N52, N53, N54 engines.
OEM#: 11 9 280

Made in China

BMW N20/N26 Flywheel Locking Tool, 50570

Description:
Great for Replacing The Timing Chain.
Works on BMW N20 and N26 engines.
Used for securing the crankshaft with the transmission installed(connected to engine)
Comparable to BMW Factory Tool No. 83302222742
(Note: Automatic transmissions only.)
Features:
While replacing the timing chain, this tool can hold the flywheel;
It helps to release and tighten down the central bolts on the vibration damper.
Application:
BMW 125i N20 2012-2017;
BMW 220i N20 2014-2018
BMW 225i N20 2014-2017
BMW 228i N20 2014-2016
BMW 320i N20 2012-2015
BMW 320i GT N20 2013-2016
BMW 328i N20 2011-2016
BMW 328i GT N20 2013-2016
BMW 520i N20 2011-2016
BMW 520Li N20 2013-2016
BMW 525Li N20 2013-2016
BMW 528i N20 2011-2017
BMW X1 xDrive/sDrive20i N20 2011-2015
BMW X1 xDrive/sDrive28i N20 2011-2015
BMW X3 N20 2013-2018
BMW X3 xDrive20i N20 2011-2018
BMW X3 xDrive28i N20 2012-2018
BMW X4 xDrive20i N20 2014-2017
BMW Z4 N20 2013-2015
BMW Z4 sDrive20i N20 2011-2016
BMW Z4 sDrive28i N20 2011-2016
BMW 328i / 328iX N26 2012-2016
BMW 228i / 228iX N26 2012-2016

Made in China

VAG 1.8;2.0 TFSI Camshaft Central Valve Removal Socket Kit, 50553

Description: Used for removal and installation of 4/3-way central valve for camshaft adjustment on 1.8 & 2.0 generation III TFSI engines..5 sizes with unique 2-pin positions. All with 3/8" square drive. Same as tool #T10352 special tools for VW AUDI Q5 2.0T MAGOTAN positive CC timing T10352/1 B8 A6L A8"

Applications:

Audi A3 with 4-cylinder gas direct injection, 1.8 liter, 2.0 liter ,4v, TFSI engine with chain. Passat 2006>, Passat CC 2009>, Audi A3 2004> 4-cyl. injection engine (1.8 liter and 2.0 liter engine, chain drive). Audi A4 2008 >, Audi A5 Cabriolet 2009 >, Audi A5 Coupe 2008 >, Audi Q5 2008 >, Audi A3 2012. 4-cyl. 1.8l, 2.0l 4V TFSI direct injection engine- generation II

OEM No. T10352, T10352/1, T10352/2, T10352/3, T10352/4

Made in China

Universal Truck Ball Joint Tools, 51176

Jaw opening size: 25mm, 32mm, 48mm.

Application on Iveco, DAF, MAN, Mercedes, Scania, Volvo etc.

Made in China

VW 1.8; 2.0 TFSI Camshaft Locking Tool, 50522

Description:
The camshaft sprockets locking tool is used for locking the intake and exhaust camshafts when loosening the central screw.
Application: VW 1.8 TFSI / 2.0 TFSI
Engine code : CABD, CAEA, CDNB, CDNA, CAWA, CBFA, CCTA, CCZA, CAEB, CDNC, CDHA, CABA, BYT, BZB, CDAA, CABB, CDHB

Made in China

34 Pcs Oil Drain Plug Removal & Sump Plug Key Kit, 51435

Comprehensive 34-piece professional set for removing oil drain plugs from engines, gearboxes, and rear axles.
Covers a vast range of modern vehicles and specialized applications.

Made in China

MAN TGA Drive Axle Nut Socket, 51217

Designed for removing and installing the drive axle nuts ot MAN trucs.
Suitable for MAN TGA 460 axles V9-82L-01 (disc brake/ABS) ect.
6 inside pins with 12 mm width.
3/4" Square drive, 60 mm HEX
Outside Diameter: 148 mm
Inside Diameter: 133 mm
Stud Diameter: 117 mm

Made in China

10 pcs Car Clutch Alignment Tool Set, 50636

The set includes 8 centering pieces for insertion into the crankshaft bearing and a conically turned sleeve for receiving the clutch disc.
Features:
Faster, easier replacement of clutches.
Align clutch plates and pilotbearings accurately.
Centering shaft with clutch plate adaptor.
Adapter fits through clutch plate and into pilot bushing or bearing.
Electroplated for corrosion resistance, long lasting and durable construction.
For quick centering of the clutch disc on vehicles with pilot bearings.
Ensures a clean placement of the gearbox
Prevents unbalance of the coupling due to staggered installation.
Suitable for Audi, Citroen, Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Seat, Skoda, Subaru, Toyota, Vauxhall
Weight: 830g

Made in China

Volvo B4204 Camshaft Alignment Tools, 50389

For aligning the camshaft and crankshaft with correct positioning into the side cover of the newest Volvo B4204 engines (8-speed transmission)
Application:
Volvo S60 (since 2011)
Volvo S60L (since 2007)
Volvo S80 (since 2007)
Volvo V40 (since 2013)
Volvo V40 Cross Country (since 2008)
Volvo V60 (since 2008)
Volvo V60 Cross Country (since 2008)
Volvo V70 (since 2008)
Volvo XC60 (since 2008)
Volvo XC70 (since 2008)
Volvo XC70 (since 2016)
Engine Codes: B4154T2, B4154T3, B4154T4, B4154T5, B4154T6, B4204T10, B4204T11, B4204T12, B4204T14, B4204T15, B4204T17, B4204T18, B4204T19, B4204T20, B4204T21, B4204T23, B4204T26, B4204T27, B4204T28, B4204T29, B4204T31, B4204T32, B4204T33, B4204T34, B4204T35, B4204T36, B4204T37, B4204T38, B4204T41, B4204T43, B4204T44, B4204T9

OEM No.: 9997490, 9997493, 9997495, 9997496, 9997497

Made in China

Clutch Alignment Tools, 50362

Professional clutch alignment set.
Contents spigot adaptors: Ø 10.6 to 20mm, guide sleeves: Ø 13.7 to 26mm
For fast accurate alignment of pilot hole flywheels and clutch plate when assembling to car.
Facilitates the alignment of clutch for assembly, while vehicle maintenance.
Precision manufactured steel bushes with chemically blackened steel finish.
Application: Audi, Citroen, FIAT, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Toyota, Vauxhall, VW, Volvo.

Made in China

GM Opel 2,8i; 3,6i V6 - Engine timing tool set, 50349

Designed to lock the camshafts on the Vauxhall engines listed in the applications provided. Plates are oversized to prevent the valve covers being installed should the tools be accidentally left on the engine.
Applications: Vauxhall, Opel, Saab, Cadillac, Holden 2.8i, 3.6i V6
2007-2011 GMC Acadia, Buick Lacrosse, Cadillac CTS, SRX and STS
2007-2009 Pontiac G6 and Saturn AURA
2007-2010 Saturn OUTLOOK
2008-2009 Pontiac Torrent;
Engines:  LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, B284L.
OEM No.  EN-48383 (A=EN-48383-1, B = EN-48383-2, C=EN-48383-3)

Made in China

Step Drill 9x 5.5mm for Glow Plug Removal set, 50339-2

Size: 9x5.5mm
Material: HSS (High Speed Steel)

Made in China