INSTRUMENTS

Mercedes-Benz 9G-Tronic Transmission - Oil Drain and Refill Set, 50569

Designed for draining and refilling ATF on Mercedes-Benz 9-speed automatic transmissions (type 725.0)
Special design for leak-free and spill-free ATF services
Refill adapter shall be used with an ATF refill pump and tank

OEM №: 725 589 02 90 00, 725 589 00 90 00

Made in China

Mechanic's stethoscope, HS1022
Locates source of engine niose;
Quickly listen for trouble by tracing sound of flowing water, oil gas or steam;
Identify piston slap, wop gears, faulty valves, water pump, failute damaged gaskets and effective bearings;
Handle is snockproof;
Disassembles for storage.

Renault/Nissan V6 3.0 DCi V9X - Engine timing tool set, 50549

Applicable:
Renault: Renault Espace, Renault Vel Satis, Grand Espace 4, Renault Master
Nissan: Nissan INFINITY, Nissan Navara, Nissan Pathfinder (R51)
Engine:
Renault 3.0 DCI, Nissan / Infiniti - 3.0 D
Engine Code: V9X

Made in China

Three Lug Wrench, HS-994
Features:
To remove the difficulty from manipulating your car wheel's nuts
Featuring a dual size socket and a telescopic handle, this wrench is versatile enough to be used in a range of
situations, in a range of space constraints
Supplied with a double ended socket, 17/19mm & 21/23mm
It has a telescopic handle extending to 480mm and fits most car wheel nuts
The 1/2" Dr. wrench can also be used with standard 1/2" Dr. sockets
Material: Cr-V

Made in China

Crankshaft Turning Tool, 50535

Used for turning the crankshaft pulley.
With 1/2" drive, 22mm square, and 12mm rotating pivot pin.
Application:
Audi A6 2005 and up
Audi A8 2003 and up
Engine: 6 cylinder 2.4, 3.2L FSI.
OEM №: T40058

Made in China

Fiat  1.4 12V - Engine Timing Tools, 50529

Designed specifically to allow the cam and crankshaft to be aligned when setting the engine timing on the 1.4L 12 valve petrol engines found across the Fiat and Lancia ranges from 1995 to 2000.
Designed specifically for the 1.4 12v engine.
Application:
Models:
Fiat 1.4 12v engine, Fiat Brava, Brao, Marea Weekend(95-00)
Lancia Ypsilon
Engine code: 1.4 12v - 182 A3.000, 182 A5.000
Contents:
Camshaft locking tool (OEM Ref 1 860 899 000)
Crankshaft timing tool (OEM Ref 1 860 901 000)
NOTE: The Camshaft locking tool will only fit the OEM camshaft found in the engines codes listed.

Made in China

VAG crankshaft Pulley/Damper Puller, 50506

This removal tool must always be used to separate the vibration damper from the gear wheel of the crankshaft. Working on 4 cylinder common 2.0L, required for the damage free removal of the vibration damper with internal thread.
Applications:
Volkswagen T6/Transporter (from 2017).
Engine: 4 cylinder common rail 2.0L.
OEM №: T50071.

Made in China

Tire Valve Core Removal Tool, 50987

Ideal for fast removal and installation of core without damage from a wheel valve.
Robust Steel Shaft with corrosion resistant plating and durable plastic handle.
Suitable for motorcycles, cars, bikes and commercial vehicles.
Lenght: 170mm

Made in China

Motorcycle Chain Breaker and Riveting Tool, 50402

For Breaking / Pressing and Riveting Motorcycle Drive Chains - 520; 525; 530; 532
Tool can be secured using a vice or spanner
Contents 3; 4 and 5mm Pins

Made in China

Alfa Romeo Twin Spark Twin Cam Belt Drive - Petrol Engine Setting/Locking Kit, 50327

For 1.4, 1.6, 1.8, 2.0 16v Twin Cam - Belt Drive
Contents:
Camshaft setting plates for locking the camshafts in the timed position. The plates are positioned in place of the camshaft bearing caps.
Timing and balance shaft belt tensioner adjusters.
Applicable:
Alfa Romeo Twin Spark:
1.4/1.6 Engines - 145/146/155/156 (96-01)
1.8 Engines - 145/146, (96-01), 155/156 (96-06),
Spider/GTV (98-01):
2.0 Engines - 145/146 (96-01), 147 (01-07), 155/156 (95-02), 166 (98-01)
Spider/GTV (96-03)
1.4/1.6 Engines - 145/146/155/156 (96-01),
1.8 Engines - 145/146, (96-01), 155/156 (96-06), Spider/GTV (98-01),
2.0 Engines - E145/146 (96-01), 147 01-07, 155/156 (95-02), 166 (98-01),
Spider/GTV (96-03)
Plate Applications:
Purple; 1.4, 1.6, Blue; 1.8, 2.0
OEM №: 1825041000, 1825042000, 1822154000, 1822149000
Engine code:
162.01, 321.04, 322.01, 322.05, 323.01, 323.10, 335.03, 372.03, 671.06, 672.04, 676.01

Made in China

Plastic Rivet Clip Removal Plier, 50944

Designed to remove reusable two-part plastic rivets, such as those used on plastic trims or door trims.
The head can be adjusted from 0° - 90° to achieve the correct angle to extract the centre locking clip.
Length: 230mm.
Steel construction.
Dipped handles.

Made in China

64 Pcs Oil Drain Plug Thread Repair Set, 50324

Application:
For Repairing Sump, Gearbox Drain Plug Tool Set
A comprehensive thread repair kit ideal for repairing sump, gearbox and differential drain plug threads.Used to tap the damaged thread slightly over size, then fit a new drain plug and washer supplied.
Set is suitable for the most popular threads used on cars and light commercial vehicles.
Tap Sizes:
M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5mm
Taps material: Chrome Vanadium

Made in China

2 Pcs Wire Terminal Removal Tool, 50923

Designed to remove wire terminals from terminal blocks without damage.
Provide 12 different tool styles fit most common connectors.
Grey tool removes wires from terminals and red tool designed for Pack-Con and Weather-Pack terminals on GM C3 systems and retrieval of trouble codes from engine computer on some GM vehicles.

Made in China

Fiat Alfa Romeo Lancia 0.9 Twin Air Chain Drive - Engine Timing Tool Set , 50294

Designed to lock the cam and crankshaft in position to allow the removal and replacement of the timing chain fitted to the new low emission and high economy twin cylinder Fiat engine.
Note: Fiat state that after rebuild these engines should be placed on suitable electronic diagnostic software for the onboard electronic control systems to be reset.

Content:
Pulley Locking Pin
Flywheel Locking Pin
Camshaft Locking Plate
Balancing shaft adjustment tool
Applicable:
Alfa Romeo:MiTo（2012-2015）
Fiat: 500/500C（2010~), Panda（2012~), Punto（2012~)
Lancia: Ypsilon(2011~)
Engine code: 0.9 Twin Air Turbo: 312A2.000

OEM №: 2.000.035.300; 2.000.035.200; 2.000.035.100; 2.000.038.300

Made in China

PCD Gauge, 50918

For measurements the hole circle on steel and aluminum rims.
Greatly facilitates the determination of the hole circle.
Suitable for 4, 5, 6 and 8 lug rims.
4-Lug: PCD 4x98mm, 4x100mm, 4x108mm, 4x110mm, 4x120mm, 4x130mm, 4x140mm, 4x4.5"
5-Lug: PCD 5x100mm, 5x108mm, 5x112mm, 5x115mm, 5x120mm, 5x130mm, 5x135mm, 5x150mm, 5x4.5", 5x4.75", 5x5.0", 5x5.5"
6-Lug: PCD 6x135mm, 6x4.5", 6x5.0", 6x5.5"
8-Lug: PCD 8x170mm, 8x6.5"

Made in China