INSTRUMENTS

Oil Measuring Jug - 1 L, 50225-1

This oil measuring jug is resistant to oil, fuel and most acids.
Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages.
Complete with flexible spout.
Material: High-density polyethylene.
Capacity: 1 l

Made in China

9 PCS Cap Oil Filter Wrench Set, 50641

Contents:
3/8”Dr. 27mm, 6PT.
3/8”Dr. 32mm, 6PT.
3/8”Dr. 36mm, 6PT.
3/8”Dr. 64.5mm, 14 flutes.

3/8”Dr. 88.8mm, 15 flutes.
3/8”Dr. 74.2mm, 14 flutes.
3/8”Dr. 86.6mm, 16 flutes.
63 to 83mm Аdjustable wrench.

Made in China

Piston ring compressor, EN6203125

Lenght: 54-125mm

Made in Pard, Force

Piston ring compressor 90-175 mm, EN6204175

Capacity: 90-175 mm

Quick release button.

Made of good quality spring steel.

Operated by the 1/4"drive key (included)

BMW M52TU/M54/M56 - Crankshaft Pulley Holding Tool, 50296

Features: For BMW 6 Cylinder Engine M52TU / M54 / M56
Tool is designed to hold the crankshaft pulley stationary while loosening or tightening the center screw.
It can safely remove the pulley and won't damage the pulley shock - proof function.

Application: BMW (M52, M54, M56).

Made in China

Piston ring compressor 90-175 mm, 6204175

Capacity: 90-175 mm

Quick release button.

Made of good quality spring steel.

Operated by the 1/4"drive key (included)

Made in Taiwan, Force

Spark Plug Thread Repair Kit, 50261

Comprehensive and time saving kit of spark plug thread repair tools.
Especially suitable for the repair of deep -seated plug configurations.
Incorporates taper  M 14хP1.25/М 15.8xP1.25 and plug taps M 14x1.25 HSS together with integrated ream.
Stepped tap ensures correct alignment of cutter in existing spark plug hole.
Extension tools allow easy access to the bottom of the plug recess.
Includes set of plug inserts M14x1.25: 10 pcs L10mm and 10 pcs L15 mm

Made in China

Piston ring compressor, 6203125

Lenght: 53-125mm

Made in Force, Taiwan

BMW M40, M70 - Engine timing tool set, EN9G1212
Features:
This kit will service a wide range of older BMW both petrol belt & chain driven engines.
Used to align/lock camshaft in cylinder 1 TDC firing position duringchain removal & replacement.
2 pieces are recommended for V12 camshaft assembly (though not required.)
Content:
Camshaft alignment tool
Flywheel timing pin
Models:
BMW 3 Series (E36/E46): 316i (1993-2004), 316i Compact (1998-2001), 318i (1993-2001)
BMW 5 Series (E34): 518i (1994-1996)
BMW Z Series (E36): Z3 1.8 (1996-2003), Z3 1.9 (1996-2003)
Engine Codes:
1.6: M43; 16 4E 2, 16 4E 3
1.8: M43; 18 4E 2
1.9: M43; 19 4E 1
OEM №: 11.2.300, 11.3.190

Made in Taiwan

64.5mmx14-pt Oil Filter Cap Wrench For Toyota, EN631BО
Description:
Oil filter wrench provides maximum torque with multiple contact points and won't break or damage fragile Toyota plastic filter cartridges.
Designed for maximum torque
High strength forged alloy, Sand blasted non-slip finish
4. 24mm x 64.5 mm with 14-pt for a snug no-play, no-slip fit
Size 64.5mm - Number of flutes 14 - Drive - 3/8"
Material: aluminium black
Applicable:
Most of Toyota 4 Cylinder (1800CC - 2000CC)
Special designed for plastic oil filter cap of TOYOTA
Suitable for Toyota - Allion, Auris, Corolla axio, Corolla fielder, Corolla rumion,Isis ist, Noah, Premio, Prius, Voxy, Wish
Toyota:
2005-2008 Avalon
2009-2015 Corolla
1990-2015 Camry 4 cyl, V6 (2007-2008)
2001-2008 Highlander 4 cyl,V6 (2008)
2009-2015 Matrix
2007-2015 Prius
2010-2015 Rav4
2007-2014 Sienna
2007-2008 Tundra

Made in Taiwan

110-160mm Piston ring pliers, EN62302

Length: 190 mm

Capacity: 110-160

To replace segments without tearing or deformation.

Applicable to trucks.

It has a smooth fastening edge to prevent deformation.

Made in Taiwan

Injector Seat and Shaft Cleaning Tool Kit, 50883

It contains a set of tools that ensure effective cleaning of the injector hole and the surface of the bed before inserting the new nozzle. It is used in a wide range of vehicles.
Suitable for Fiat Citroen BMW Peugeot Renault and Mercedes-Benz
Includes:
4 pcs cleaning brushes, brush holder, 3 pcs injector seat mill, cutter guide, sealing ring puller, brush holder extension injector seat and shaft cleaning kit, Note: only use brushes clockwise.
3 pcs conical sleeves for the guide pin 17 / 18.4 / 19 mm.
Guide bolts for sealing seat mills with 19 mm external hexagon head.
3 pcs milling heads:
15 x 19 mm diameter - Mercedes CDI
17 x 17 mm diameter - BMW, Peugeot, Citroen, Renault for Delphi / Bosch injectors
17 x 17 mm diameter 30° bevelled -  Fiat and Iveco sealing ring extractor.
Joint shaft with 6.3 mm (1/4 inch) hex bit holder for drill holders, for brushes with 6.3 mm (1/4 inch) hex bit holder.
2pcs  brush heads with 19.5 mm diameter, 2 pcs long, thin brushes for nozzle needle shaft.
6 pcs guide plugs for closing the nozzle needle shaft with holder for removal and installation.

Made in China

SUCTION GUN PRESSOL 1000ml

Chain oil filter wrench 1/2"Dr., EN61901

Suitable for removing oil filters up to 120mm in diameter, simply locate the chain around the oil filter and it tightens to fit the diameter.

This tool is designed to be used with a 1/2 drive ratchet or 21 mm spanner.

Made in Taiwan

VAG - Turbo Actuator Adjustment Set, 50751

This tool set is designed for the professional loosening, adjustment and tightening of the control rod when removing/installing the pressure capsule along with the charge pressure actuator position sensor on VAG 2.0L Common Rail Diesel engines.
Application:
Golf Ml V1 (2008 - 2013), Golf Plus (2004 - 2015), Jetta (2004 - 2010), Passat (2005 - 2010), Passat CC (2008 - 2012), Scirocco (2008 - 2017), EOS (2006 - 2015), Tiguan (2007 - 2018), Transporter T5 (from 2009).
Set contains:
1 Pc 1/4" Dr. Socket 10mm, OEM T10422
1 Pc 12pt Spanner 10 x12mm, OEM T10423

Made in China