INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Vauxhall/Opel 2.0CTDi - Diesel Engine Timing Tool Kit, 50533
Vauxhall/Opel 2.0CTDi - Diesel Engine Timing Tool Kit, 50533
Features:
For the replacement of the timing chain within the cylinder head.
For locked the camshafts into their timed position during timing chain replacement.
Application: Vauxhall/Opel 2.0 CDTi - LFS/B20DTH, LFS/B20DTR (2.0 CDTi from 2014).
Models: Antara (from 2016), Cascada (from 2015), Insignia-A/Country Tourer (2014-2017), Insignia-B/Country Tourer (from 2017), and Zafira-C Tourer (from 2014); CDTi EcoFLEX Blueinjection.
OEM# EN 51415, EN 51418.
Made in China
Valve core remover tool, 50987
Tire Valve Core Removal Tool, 50987
Ideal for fast removal and installation of core without damage from a wheel valve.
Robust Steel Shaft with corrosion resistant plating and durable plastic handle.
Suitable for motorcycles, cars, bikes and commercial vehicles.
Lenght: 170mm
Made in China
Volvo Ford 1.8 2.0 - Crankshaft Pulley Holding Tool, 50521
Volvo Ford 1.8 2.0 - Crankshaft Pulley Holding Tool, 50521
Also suitable compatible with some Volvo vehicles.
Applicable:
Ford: C-MAX (07-10), Fiesta (95-12), Focus (98-11), Focus C-MAX, Galaxy (06-12), Mondeo (93-12), S-MAX (06-12), Transit (06-12)
Volvo: C30 (06-12), S40 (06-12), S80 (07-11), V50 (04-12), V70 (07-11)
Engine Codes: AOBA, AOBC, AODA, AODB, AODE, AOWA, AOWB, B4184S8, B4184S11, B4204S3, B4204S4, CDBB, CGBA, CGBB, CHBA, CHBB, CJBA, CJBB, CSDA, CSDB, GZFA, GZFB, GZFC, N4JB, Q7DA, QQDA, QQDB, QQDC, SEBA, SEWA, SYDA, TBBA, TBBB, TBWA, TBWB
OEM No.: 49 B011 105
Made in China
Citroen/Peugeot/Fiat/Ford - Belt Tension Wrench, 50516
Citroen/Peugeot/Fiat/Ford - Belt Tension Wrench, 50516
Facilitates the pre-tensioning and locking of V-ribbed belt tensioners.
For the removal / installation of the V-ribbed belt in - situ on the vehicle even in very limited space condition.
Suitable for Citroën / Peugeot / Fiat / Ford 1.4L and 1.6L diesel engines.
Applications include: Citroën, Peugeot, Ford & Fiat 1.4 & 1.6 diesel engines.
Citroën: Berlingo, C1, C2, C3, C3 Picasso, C3 Pluriel, C4, C4 Picasso, C5, DS3, DS4, Xsara & Xsara Picasso.
Peugeot: Partner III, 206, 207, 308, 508, 3008, 5008.
Engines covered include DV4 & DV6 engines.
Engines: 1.4-1.6D
OEM No.: 0188-Z , G.0194-E3
Made in China
Plastic Rivet Clip Removal Plier, 50944
Plastic Rivet Clip Removal Plier, 50944
Designed to remove reusable two-part plastic rivets, such as those used on plastic trims or door trims.
The head can be adjusted from 0° - 90° to achieve the correct angle to extract the centre locking clip.
Length: 230mm.
Steel construction.
Dipped handles.
Made in China
Land Rover, Ford DOHC 2.2 Diesel - Balance Shaft Timing Tool Set, 50422
Land Rover, Ford DOHC 2.2 Diesel - Balance Shaft Timing Tool Set, 50422
Special set of tools for checking, holding and locking the balancing shafts, DOHC 2.2 diesel engines with belt drive of Ford and Land Rover.
Engine codes:
Ford Q4BA and Q4WA 2.2 diesel in Galaxy, SMAX and Mondeo 2008-2015.
JLR & PSA DW12 in Freelander II (2006 - 2015)
Range Rover Evoque (2011 - 2015).
Application:
Ford: Galaxy, S-MAX, Mondeo
Engine: 2.2 TDCi
Engine codes: KNWA, Q4BA, KNBA, KNBB
Land Rover: Freelander, Range Rover Evoque, Discovery Sport
Engine: 2.2TD4, 2.2SD4, 2.2eD4
Engine codes: DW12CTED / 22DT, DW12CTED4, 224DT
OEM №: 303-1328 / 0190D; 303-1329; 303-1330
Made in China
2 Pcs Wire Terminal Removal Tool, 50923
2 Pcs Wire Terminal Removal Tool, 50923
Designed to remove wire terminals from terminal blocks without damage.
Provide 12 different tool styles fit most common connectors.
Grey tool removes wires from terminals and red tool designed for Pack-Con and Weather-Pack terminals on GM C3 systems and retrieval of trouble codes from engine computer on some GM vehicles.
Made in China
Twin Clutch Dry Transmission Remover and Installer, 50295
Twin Clutch Dry Transmission Remover and Installer, 50295
Description:
Special designed to disassembly dry transmission and align the twin-clutchto change the oil seal
Applicable: VOLVO, FORD, DPS6 transmission
OEM №: 307675.
Instruction:
Install the special tool and compress the input shaft. Turn the threaded bar 20 turns after it makes contact with the input shaft.
Made in China
PCD Gauge, 50918
PCD Gauge, 50918
For measurements the hole circle on steel and aluminum rims.
Greatly facilitates the determination of the hole circle.
Suitable for 4, 5, 6 and 8 lug rims.
4-Lug: PCD 4x98mm, 4x100mm, 4x108mm, 4x110mm, 4x120mm, 4x130mm, 4x140mm, 4x4.5"
5-Lug: PCD 5x100mm, 5x108mm, 5x112mm, 5x115mm, 5x120mm, 5x130mm, 5x135mm, 5x150mm, 5x4.5", 5x4.75", 5x5.0", 5x5.5"
6-Lug: PCD 6x135mm, 6x4.5", 6x5.0", 6x5.5"
8-Lug: PCD 8x170mm, 8x6.5"
Made in China
Opel Vauxhall 1.3 CDTi - Diesel Engine Timing Tools, 50286
Opel Vauxhall 1.3 CDTi - Diesel Engine Timing Tools, 50286
Applications on Corsa E 1.3 Diesel since 2015, include:
Vauxhall/Opel Agila, Agila B, Astra G, Astra H, Combo C, Corsa D, Meriva A, Meriva B, Tigra B, Zafira B.
Alfa Romeo Milto
Fiat 500, 500C, Doblo, Doblo cargo, Fiorino, Grande Punto, Idea, Linea, Panda, Panda classic, Punto Evo, Qubo.
Ford Ka.
Lancia Musa, Ypsilon.
Peugeot Bipper.
Suzuki Ignis, Splash, Swift, Wagon R+.
OEM №: KM-662-C, EN-50515, EN-51500, EN-46775, KM-955-1, EN-46785
Made in China
VAG Ignition Coil Remover, 50281
VAG Ignition Coil Remover, 50281
For removing ignition coils on VAG models as of 2013
Pencil type for inserting in mounting hole of the ignition coil suitable for 4 cylinder 1.2 / 1.4 / 1.8 / 2.0 FSI / TFSI engines built in e.g. VW Golf, Audi A3, Seat Leon, Skoda Octavia
OEM № T10530
Made in China
M8x1.0 Thread repair set , 50725M
M8x1.0 Thread repair set , 50725M
Features:
This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 8x1.0
Made in China
45° Angled Flat Band Hose Clamp Pliers, 50280
45° Angled Flat Band Hose Clamp Pliers, 50280
Used to remove and install flat band hose clamps.
45° Angled feature provides easy access to clamps located in hard-to-reach areas.
Ratcheting lock mechanism holds the clamp in an open position for easy removal and installation.
With Comfortable handle with ergonomic grip.
Length: 220mm
Made in China
M9x1.25 Thread repair set , 50725N
M9x1.25 Thread repair set , 50725N
Features:
This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 9x1.25
Made in China
Wire Hose Clamp Pliers, 50279
Wire Hose Clamp Pliers, 50279
Used to remove and install wire hose clamps.
Ratcheting lock mechanism holds the clamp in an open position for easy removal and installation.
With Comfortable handle with ergonomic grip.
Length: 220mm
Made in China
