INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Adjustable hook wrench, 6423550P
Adjustable hook wrench, 6423550
Size: 35-50 mm
Material: Cr-V
Drop forged body
Made in Pard, Taiwan
6 pcs 3/8"Dr. Glow Plug socket set, 50884
6 pcs 3/8"Dr. Glow Plug socket set, 50884
The set contents six 6-pt. socket inserts with a 180 ° flexible head for 8, 9, 10, 12, 14, 16 mm glow plugs
Overal lenght: 85 mm
Drive: 3/8"
Material: Cr-V
Made in China
Long nose locking pliers 9" 615225
Long nose locking pliers 9" 615225
L- 225mm (9")
Made in : Pard, Taiwan
Volvo, Ford - Diesel/Petrol Crankshaft Holding Tool, 50791
Volvo, Ford - Diesel/Petrol Crankshaft Holding Tool, 50791
Used to counter-hold the crankshaft pulley to release and tighten the centre bolt.
Application:
Volvo: S40, V40, V50, XC90, XC70, S70, V70, S60, S80, C30, C70.
Ford: Mondeo, Galaxy, S-MAX, Focus, Kuga.
OEM: 999 5433/303-1179
Made in China
BMW High Pressure Pump and Crankshaft Locking Tool(B series), 50538
BMW High Pressure Pump and Crankshaft Locking Tool(B series), 50538
Specially designed to fixing and lock high pressure pump to crankshaft when replacing timing chain.
Applicable: BMW B37, B47, B57, B38, B48 engine.
OEM No.: 242082
Made in China
Professional Cable Tie Pliers 170mm, 67805
Professional Cable Tie Pliers 170mm, 67805
Heavy-duty 170mm cable tie tensioning and cutting pliers designed for fast, clean, and flush-cut trimming of plastic zip ties without leaving sharp edges.
Made in Taiwan
BMW E46/E39 Crankshaft pulley holding tool, 846-8083А
Crankshaft pulley holding tool BMW 3/5 Series, 846-8083А
Features:
Holds vibration damper when loosening or tightening centre crankshaft bolt.
Applicable: BMW 3 series E46 (1998 - 2007), 5 series E39 (1996 - 2003)
BMW E81 120d 163PS
BMW E46 318d 116PS - 318td 115PS - 318dt 115PS - 318d, 115PS - 320d 136PS - 320td 150PS - 320d 150PS
BMW E90 318d 150PS - 320d 150PS - 320d 163PS
BMW E91 318d 122PS - 320d 150PS - 320d 163PS
BMW E39 520d 136PS
BMW E60 520d 163PS - 520d 150PS
BMW E61 520d 150PS - 520d 163PS
BMW X3 E83 2.0d 150PS
OEM No. 11 6 310 (11 6 311 holder, 11 6 312 centring tube)
Centering tube OD: 60mm, ID: 49mm
Made in Taiwan
3 in 1 Tubing bender, 65301
3 in 1 Tubing bender, 65301
For bending copper and other soft metal pipes up to 90°.
These pliers are suitable for pipes up to Ø10mm.
With the help of these pliers you prevent the "bending" of the pipes.
Produced by Pard, Taiwan
Mercedes Benz /BMW Oil pan wrench, 846-7157
Mercedes Benz /BMW Oil pan wrench, 846-7157
A wrench designed specifically to service the driveline fluids on most BMW and Mercedes Benz vehicles.
The 14-mm Allen end services the fill and drain plugs on the transmission and differential housing. The low-profile design allows access where restricted space does not allow the use of a conventional socket. The 17-mm box end services the oil drain plug.
BMW: Most vehicles since 1990
Mercedes Benz engine types: 102.92/93/96/98/99, 103, 104, 110.92/98/99, 112, 113, 116, 117, 119, 120, 266, 275, 285, 601, 602.91/93/94/96, 603.91/93/96/97, 604, 605, 606, 615, 616, 617.91 /95
Mercedes transmission types: 716, 717, 722, 63
Made in Taiwan
VW/Audi Spark plug electric wire remover, 04029035
VW/Audi Spark plug electric wire remover, 04029035
The tool is designed to separate the electric wire from spark plug.
Application: Volkswagen and Audi
Made in Taiwan
5 pcs Mini Pick & Hook Set, EN905G6
5 pcs Mini Pick & Hook Set, EN905G6
These 5 piece mini pick & hook sets have stainless steel points and a aluminium handle.
Ideal for craft activities and many mechanical jobs such as extracting 'O' rings, springs, washers and snap rings.
Includes:
Aluminium Handle
Stainless Steel Awl End
Stainless Steel Hook End
Stainless Steel 45° Bent Tip
Stainless Steel Long 90° Bent Tip
Made in Taiwan
14mm 3/8"Dr. 12-pt. Spark plug socket, 0402534101
14mm 3/8"Dr. 12-pt. Spark plug socket, 0402534101
Thin-Wall Socket with 3/8”Dr.
Overall Length is 50.8mm (2-1/2”)
Heavy-Duty Construction Ensures Durability
Applicable:
BMW: E90 N 54 Engine 335 i Lim. From Bj. 2006
RENAULT: Twingo, Clio, Kangoo 1.2 l 16V engine
PEUGEOT: 207, 307
CITROËN: C4 with 1.4 and 1.6 liter 16V engine, with 2.0L C5 HPi engine
MERCEDES-BENZ: Motor M 156, M 276 engine, Nissan Micra, Note, MINI from 1.2 to 1.4L 4-cyl. from Bj. 2007
Made in Taiwan
Mercedes Benz compressor belt pulley, 01125039
Mercedes Benz compressor belt pulley, 01125039
Special tool for using on removing / installing compressor belt.
With Special three point design for suitable using on parts of the vehicles.
Applicable: BENZ M112, M113, M272M, M273.
Made in Taiwan
Adjustable Cool Gas Quick Joint - 2 pcs., HS1056
Adjustable Cool Gas Quick Joint - 2 pcs., HS1056
Feature::
Side fitting for A/C manifold gauge set (R-134A) type.
Coupler Interface Fits with R134 Service Ports.
High low adjuatable AC 134A quick coupler connector adapter.
Easy to install.
Including the high side and low side coupler.
Cool Gas Quick Joint
Fitting: R-134A AC Manifold Gauge
Straight design suitable for the confined space
Specification:
Material: Brass
Compatibility: R134
Scope of application: Car add fluorine
Blue Inside diameter: 14 mm
Red Inside diameter: 17 mm
Made in China
VAG 1.2/1.6 TDi и 2.0L TDI engines - Diesel injector remover, 011108019A
VAG 1.2/1.6 TDi и 2.0L TDI engines - Diesel injector remover, 011108019A
Applicable:
Volkswagen Golf 2009, Seat Ibiza 2008, Altera 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013.
Engines: 1.2L TDi CR 55Kw Diesel, 1.6L CRTD Diesel and 2.0LTDI Diesel.
OEM tools: T10402, T10415, T10055.
Use according to OEM instructions.
No solenoid removal is required.
Made in Taiwan
