INSTRUMENTS

2 pcs Alternator bit socket M10, 50355A

1pc 1/2" Dr. Spline (XZN) socket bit M10x110mmL

1pc Reaction sorkscrew cap 33 teeth-Ø19mm-17mm hex

Aplication: VW-Audi, Skoda, Porsche, BMW, Ford, Mercedes-Benz ...

Made in China

Engine timing tool set OPEL/Vauxhall  1.6 SIDI, 50260

Comprehensive Vauxhall / Opel 1.6 SIDI petrol engine locking kit.
The kit provides the essential tools required when replacing the camshaft drive chains and for setting the engine timing.
Contents:
Two locking pins on the gear wheel of the balancing shaft
Two pins on the chain tensioner
Tools for holding and adjusting the shaft distribution
Crankshaft Seat Belt Retaining Tool, which meets 1/2 "Dr.
Application:
Vauxhall / Opel:
Astra J (2013-2015)
Zafira C Tourer (2013-2016)
Cascade (2013-2015)
Insignia Country Tourer (2014-2016)
Insignia (2013-2016)
Engines: 1.6 SIDI Turbo, SIDI Turbo EcoFLEX
Engine codes:
A16XHT, A16SHT, B16SHT, B16SHL and B16SHT
OEM Tools: EN-51147, 51153, 50513, 51148.

Made in China

DSC Clutch Installation and removal tool- Volvo, Ford, Chrysler, Dodge, 50178

Description:
Suitable for 6 speed DCT – dual clutch transmission (getrag 6 DCT450 / MPS6) on Volvo, Ford, Chrysler, Dodge.
Applicable:
Volvo: C30, C70 (06~), S40 (04~), S60 (11~), S80 (07~), S80L, V40 (13~), V40 Cross Country, V50, V60, V70 (08~), XC60.
Ford: Focus (04~), C-Max, S-Max, Galaxy, Mondeo (07~), Kuga (13~)
Chrysler: Sebring.
Dodge: Avenger, Journey.
OEM No. 9997435 (volvo) / 308-763 (Ford)

Made in China

Engine timing tool set - Audi/VW 2.0; 2.8; 3.0, 50077

Description:
For setting the engine timing when replacing the cylinder head gasket, camshaft, etc.
Suitable for Audi A6, Q5
Contents:
2x Camshaft locking tool, OEM T40133
Crankshaft locking pin, OEM T40069
Chain tensioner locking tool, OEM T40071
Crankshaft turning tool, OEM T40058
Engine applications: 2.5 FSI, 2.8 FSI, 3.0 TFSI, 3.2 FSI
Audi: A4 (2014 - 2015), A5 (2014 - 2017), A6 (2012 - 2018), A7 (2010 - 2018), A8 (2010 - 2018), S4 (2014 - 2017), S5 (2011 - 2017), Q5 (2008 - 2017), Q7 (2010 - 2018), SQ5 (2013 - 2017)
Volkswagen: Touareg 3.0 TFSI (2012 - 2017).
Porsche: Cayenne S Hybrid (2010 - 2014), Panamera (2011 - 2013)
OEM tools: T40133/1/2, T40058, T40069, T40071.
Use in accordance with OEM instructions only:
OEM1 T40133 /1 /2 | T40069 | T40071 | T40058 Audi
OEM2 T40133 /1 /2 | T40069 | T40071 | T40058 Seat
OEM3 T40133 /1 /2 | T40069 | T40071 | T40058 Skoda
OEM4 T40133 /1 /2 | T40069 | T40071 | T40058 Volkswagen

Made in China

Crankshaft locking tool set - Ford 2.2 TDCi, 50871

Features: To locking and time the crankshaft and flywheel correctly to allow for fitting of the TDC sensor.
Suitable for Ford Transit 2.2 TDCi engines from 2006, including Econetic and HDT engines.
Contents:
Crankshaft Locking Tool                                                         OEM# 303-1587
Flywheel Locking Tool for engines with Common Rail              OEM# 303-698 / 21-251
Timing Pump Locking Pin                                                        OEM# 0188H / 1860965000

OEM No.: 303-1587; 303-698 / 21-251; 0188H / 1860965000

Engine code: CYFA, CYFB, DRFA, DRFB, P8FA, P8FB, PGFA, PGFB, QVFA, QWFA, SRFA, SRFB, SRFC, SRFD, SRFE, UHFA, CYFC, DRFC, USRA

Made in China

Engine Timing Kit Fiat/ Alfa Romeo 1.4L, 50481

Features: To lock the camshaft and crankshaft in position to allow the removal and replacement of the timing belt fitted to the new generation 1.4 Fiat MultiAir engines.
Applicable:
Alfa Romeo:
MiTo    1.4 (105)               Engine code: 955A6.000
MiTo    1.4 (135)               Engine code: 955A2.000
Giulietta   1.4 (170)            Engine code: 940A2.000
Fiat:
Punto EVO   1.4 (105)      Engine code: 955A6.000
Punto EVO   1.4 (135)      Engine code: 955A2.000
Lancia:
Delta1.4                            Engine code: 955A7.000

OEM Tools No.: 2 000 035 100; 2 000 035 300; 2 00 035 200

Made in China

Engine timing tool set Mercedes Benz - Chrysler – Jeep, 50378

Suitable for both petrole and diesel engines.
The kit includes flywheel locking tools and a camshaft locking plate.
Contents:
2 pcs. Camshaft locking pins
Flywheel plate locking tool
Flywheel fixing tool with M6 x 90 mm bolts
Suitable for the following vehicles:
Models: Mercedes Benz, Chrysler, Jeep.
Mercedes:
CDI-C Class 2.0 (03-08), 2.2 (98-04), 2.2 (03-08), 2.2 (07-09), 2.7 (00-06)
E-Class 2.0 (02-09), 2.2 (98-03), 2.2 (02-09), 2.7 (98-03), 2.7 (02-09), 3.0 (02-09), 3.2 (98-03), 3.2 (02-09)
G-Wagen 2.7 (01-05)
M-Class 2.7 (99-05)
S-Class 3.2 (99-03)
Sprinter 2.7 (99-06)
V-Class 2.2 (99-03)
Viano 2.0 (03-09), 2.2 (03-09)
Vito 2.2 (99-03), 2.2 (03-09)
Chrysler:
CRD-PT Cruiser 2.2 (02-08)
Jeep Grand Cherokee 2.7 (01-05)
Engine code:
611.960/961/962/980
612.961/962/963/965/967/981
613.960
646.811/812/951/961/962/963/820/821/982/983/966
647.961/982
648.961
EDJ
OEM No.: 111589031500/8929; 601589024000/8932; 602589004000/8933

Made in China

Engine Locking Timing Tool Kit-Ford-Mazda, 50375

Description:

Designed for pulling off the camshaft timing belt wheel and locking or positioning the engine output shafts such as the camshaft and the crankshaft.
Required for changing the timing belt or for engine
Applicable:
FORD 1.8 D/TD/TDCI diesel and 1.25 - 2.0 16V Zetec petrol engine e.g
FORD Fiesta, Fscore / Oruon, Focus, Puma, Sierra, Modeo, Cougar, Couier / Kombi, P100
Mazda 121

Contents:
Crankshaft/Fuel Pump Alignment Pins x2pcs (5.8mm) - 21-260, 303 732
Crankshaft TDC Locking Pin - 21-163, 303 620
Crankshaft Timing Pin - 21-210, 303-507
Crankshaft Timing Pin - 303-193, 21-163
Flywheel Locking Tool - 21-168, 303-393
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Setting Strap - 303-376, 303-367, 21-162B
Timing Pin - 21-210, 303-620
Crankshaft Timing Tool - 21-159, 303-748

Made in China

Diesel engine timing tools - Ford 1.8 TDDi/TDCi – chine drive, 50328

The kit contains basic tools for timing belt replacement for 1.8D TDi / TDCi diesel engines, fitted for Ford vehicles, suitable for high pressure fuel pump Wet Belt applications. Features injection high pressure pump sprocket removal and timing chain cover alignment tools
Application:
For Ford: C-MAX (07-10), Courier (00-02),
Fiesta (00-02),
Focus (98-11), Focus C-MAX (03-07),
Galaxy (06-10),
Mondeo (07-10),
S-MAX (06-14),
Tourneo Connect (02-13), Transit Connect (02-13)
Engine Code:
1.8D TDCi: BHPA, F9DA, F9DB, FFBA, FFDA, FFWA, HCPA, HCPB, KHBA, KKDA, KKDB, P7PA, P9PA, P9PB, QYBA, QYWA, R2PA, R3PA, RWPA, RWPC
1.8D TDCi ECOnetic: KHBA
1.8D Tdi: BHDA, BHDB, BHPA, C9DA, C9DB, C9DC
1.8D Turbo: C9DC, RTN, RTP, RTQ
OEM Tools:
For Ford: 303-193 (21-104), 303-393 (21-168), 303-376 (21-162B), 303-652 (21-230), 310-095 (23-067)

Made in China

12 pcs Universal puller set, 50131

Applicable: Suitable for most car repair and all kinds of machine repair.
Contents:
Legs slide : 1 piece
Three legs slide : 1 piece
Arm length 100mm (4”): 3 pieces
Arm length 200mm (8”): 3 pieces
Arm length 250mm (10”): 3 pieces
Spindles: 160mm, 270mm

Made in China

Cylinder liner extractor tool set, 031-A689

Cylinder liner puller complete with support brace.
Applicable: Wet heavy-vehicle (e.g. Mercedes Benz, MAN) cylinder liners, automobile and stationary-engine liners, and other parts may be extracted using this puller.
Capasity: Ø 60 – 160
Operation: the spindle of the counter-support brace is screwed into the clamping nut of the puller, and the puller inserted into the liner. The counter-support brace is placed on to the cylinder block. Due to the newly-developed spreading system, when the spindle is turned, all three jaws spread quickly and without difficulty, until they are firmly seated beneath the edge of the liner. Then the nut of the counter-support brace is tightened.

Made in Taiwan

Engine Timing Tool Set for Audi VW W8 W12 Touareg Porsche 3.6 Phaeton 6.0 Camshaft Tool kit, 50179

The kit contents following OEM tools:
T10068A; T10363; T10332; T3242
OEM No. T10068A
Specially designed to hold and align the camshaft.
Engine Model: 6-cylinder. injection engine (4-valve), 8-cylinder injection engine (W8), 12-cylinder. injection engine (W12).
Application:
Golf 1998-new, Bora 1999-new, Passat 1997-new, Sharan after 1996, Touareg 2003 newer, Phaeton 2003 newer, Transporter 1991 newer, Audi A8 1994 newer, Audi TT 1999 newer.
OEM No: 10363
Drive wheel adjustment tool for mechanical vacuum pump motors.
Application: Audi Q7, [2007-2009] 3.6L [V6] (4v) (BHK) (BLV) with mechanical vacuum pump / Passat 2006>, Touareg 2003>
OEM No. 10332
It secures the gear wheel position of the high pressure pump using a tuning tool.
Application: Passat 2006>, Touareg 2003>, Audi Q7 2007> and diesel engines.
Used when timer valve is on. 3.0, 3.6-liter 6-cylinder. 4V motor.
Engine Type: BLV, BHL, BHK
OEM No. 3242
Fixing pin 18x1.5. For V8 engines. It is used to lock the crankshaft in the GMT position of VW / Audi 2.7L and 2.8L V-6 engines.
Application: Audi with 4.2L V8 (4v) (BVJ) and 4.2L V8 (5v) (BHF) engines.

Made in China

Spark Plug Puller Set 4pc – VAG, 50144

Description：       

OEM No:T10095 A; T10166; T40039; T10094 A

For safe assembly and disassembly of spark plug connectors and ignition coils with power output stage.
Prevents damage to ignition coils whilst allowing faster removal 4 Piece WW Spark Puller Set
Ignition Coil Pullers for use on Volkswagen and Audi vehicles fitted with direct ignition engines.
Application:       
OEM No. T10095 A: For VW Phaeton from 2003, Golf from 1998, Bora from 1999 Sharan from 1996, Passat from 1997, 6-cyl. Injection engine (4-valve), 5-cylinder injection engine, Eos (from 2006) 3.2L, Touareg 6-cylinder (from 2003), AUDI TT 3.2L (1999-2007), A3 3.2L (from 2004)
OEM No. T10166: For Passat from 1997, Phaeton from 2003, 8-cyl. (W8) and 12-cylinder injection engines
OEM No. T10094 A: For VW Polo, Fox 1.2L, Golf 1.4L, 1.6L, Golf Plus 1.4L (from 2005), Caddy 1.4L, Bora 1.4L, 1.6L, Beetle 1.4L (petrol from 2003) , Scirocco 1.4L (from 2009), Lupo 4-cylinder direct injection (from 1999), Passat, Touran 1.6L, Phaeton, T4
OEM No. T40039: For VW and Audi 2.0L direct injection, Golf (from 2004), Touran (from 2004), Passat (from 2006), Eos (from 2006), Polo (from 2002) 4 cylinder 5V, Scirocco (from 2009) 1.8L, 2.0L, Tiguan (from 2006) 1.8L, 2.0L, Phaeton (from 2003) 8 cylinder, Audi A3 2.0L (from 2004), A4 2.0L (from 2002), A5 3.2L, 4.2L (from 2008), A6 3.2L (from 2005), A8 3.2L, 4.2L, 5.2L (from 2003), TT 1.8L, 2.0L (from 2007), R8 4.2L (from 2008), Q5 2.0L, 3.2L (from 2008), Q7 3.6L, 4.2L (from 2007), Skoda Fabia

Made in China

Engine timing tool set -  VAG 1.0;1.2; 1.4, 50114

Specially designed timing tool that allows the camshaft sprocket to be locked and held in place while changing the timing belt. The kit comes with all the tools you need to work on: 1.0L
Suitable for VAG 1 .0 (3 cylinders, 4 valves) and 1.2; 1.4 TSI (4-cylinder) petrol engines.
Applicable:
Audi: A1/A1 Sportback, A3 Cabrio, A3 Saloon, A3/A3 Sportback, Q3.
Seat: Ibiza, Mii, Leon, Leon ST.
Skoda: Citigo, Fabia III, Fabia III Estate, Octavia III.
Volkswagen: Up!, Polo, Golf VII, Golf VII Estate, Golf VII Wagon, Jetta, Passat, Golf SV/Sportsvan,  Golf VI Cabrio.
Engine type:
VW Up: 1.0 / 1.0 Bluemotion технология / 1.0 Ecofuel
Seat Mii: 1.0 / 1.0 Ecofuel / 1.0 Ecomotive
Skoda Citigo: 1.0 / 1.0 Ecofuel / 1.0 Green Tech
1.2 / .1.4 TSI
Audi A3 от 2013г
VW: Golf VII от 2012 г .; Jetta от 2012г
Skoda Octavia от 2013 година
Seat Leon от 2013 г.
Engine code:
3 & 4 cylinders
1.0 CHYA, CHYB, CPGA
1.2 TFSI: CJZA, CJZB
1.4 TFSI: CMBA, CXSA, CHPA
1.4 TGI: CPWA
1.4 TSI Multi Fuel CPVA
1.4 Hybrid CRJA
ОЕМ No.: T10340, T10494, T10487, T10476, T10477, T10499

Made in China

Engine timing tool set VAG VW, Audi, Seat, Skoda - 1.4; 1.6; 2.0 TDI CR, 50059A

Basic kit.
Contents:
Crankshaft Locking Tool with Pin: OEM No. T10490
Locking Pins: OEM No. T10492

Application:
AUDI: Audi A1, A3 (8P), A4 (B8), A5, A6 (C7), TT (8J), Q3 and Q5
SEAT: Seat Ibiza (6J), Leon III, Exeo, Altea and Alhambra II
SKODA: Skoda Fabia III, Roomster, Praktik, Octavia III, Superb II/III, Yeti II and Kodiaq
VW: Golf VI /Plus, Polo V, Jetta VI, Caddy II, Beetle II, Passat (362/365), Scirocco III, Eos, Touran II, Tiguan, Sharan II, T5 and Amarock

Engine type:
1.4 TDI CR; 1.6 TDI CR; 1.6 TDI CR Ecomotive; 1.6 X-PERIENCE; 2.0 TDI CR; 2.0 X-PERIENCE; 2.0 TDI CR Ultra

Engine code: CKFB, CKFC, CLHA, CLHB, CNHA, CNHC, CRBC, CRBD, CRFA, CRKA, CRKB, CRLB, CRLC, CRMB, CRUA, CRVA, CRVC, CSUA, CSUB, CSUD, CSUE, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUA, CUUB, CUVA, CUVC, CUVD, CUWA, CXMA, CXXA, CXXB, CYKA, CZDA, CZJA, DBKA, DCXA, DDAA, DEUA, DEUB, DFLA, DFLD, DFMA, DFSA, DFSB

Made in China