INSTRUMENTS

Valve spring compressor lever type OHV/OHC engines, 50117

Suitable for replace springs and valve stem oil seals.
It is not necessary to remove the cylinder head.
With its adjustable handle, claws and hooks, the tool can be used on most OHV / OHC engines.
Applicable to two-shaft drive engines.
Can be used in hard-to-reach places.
Made of high-grade steel No. 50.
N.W.: 700 g

3" Engine Cylinder hone with three arms, 50721

Designed for fast and accurate deglazing of cylinders from 2" to 7" diameter.
Flexible drive shaft for use with air or electric drills
Hone size: 75х10х8 mm

Produced by China

Mercedes M651 Camshaft locking tool kit, 50058

Features:
To lock and hold the camshaft and balance shaft in the timed position.
Also for turning, disassembly  and installing the crankshaft pulley.
Applicable:
Mercedes-Benz OM651 1.8/2.1/2.2 CDI diesel engines  - Chain drive:
Mercedes-Benz: A-Class, B-Class, C-Class Coupe, C-Class Cabriolet, E-Class, E-Class Coupe, E-Class Cabriolet, CLA Coupe, CLA Shooting Brake, CLS, GLA, GLC, GLC Coupe, GLE, GLK, M-Class, S-Class, SLC, SLK, Sprinter, Valente, V-Class, Viano, Vit.
Jeep: Compass, Patriot.
Engine codes:
1.8: 651.901
2.1: 651.930, 651.921, 651.960, 651.913, 651.916, 651.912, 651.961, 651.980, 651.9, 651.956, 651.955, 651.957, 651.950, 651.940, 651.910, 651.911, 651.924, 651.925, 651.922, 651.911, 651.924
2.2: 651.925, ENE (651.925)
No. по OEM: 651 589 09 40 00; 651 589 00 40 00; 651 589 02 63 00.

DSG Clutch Instalation set – VAG, 50842

Designed for the correct removal and installer of twin plate clutches used in VAG 6/7 speed gearboxes as featured in Volkswagen Golf / Touareg и Audi A3
Applicable: VW GOLF (2004 onwards), VW TOUAREG (6 speed) and AUDI A3 (2004 onwards).
Inclded the equivalent to OEM tools:
T10323 - Clutch support device
T10373 – Clitch puller
T10374 – Release bearing setting tool
T10376 – Clutch press piece.

Engine Crankshaft Pulley Remover Tool Set-Jaguar-Land Rover V8-Chain Drive, 50821

Special designed for pulley removal and holding tools.
Appicable: New Range Rover, Range Rover Sport, Discovery 3, Jaguar XJ8, XJR, S Type, XF, XK8, XKR.
Suitable for Jaguar and Land Rover 3.2, 3.5, 4.0, 4.2, 4.4 V8 petrol engines.
Land Rover 3 / Discovery 3 V8 4.4L | '05 - '09 | 4.4 V8 Engine Only
Range Rover Full Size 4.4 (Jag Engine) | '06 - '09 | JAG V8 ENGINE
Range Rover Full Size 4.2 Supercharged (Jag Engine) | '06 - '09 | JAG V8 ENGINE
Range Rover Sport | '06 - '09
Range Rover Sport Supercharged | '06 - '09

Made in China

10” Wheel Balance Plier, 50410

Features:
High quality tool for removing and placing balancing weights.
PVC-dipped handles for comfort and extra grip,
Overall length: 240 mm (10 ”)

Made in China

Petrol Engine setting/locking set – Opel/Vauxhall, Chevrolet 1.0; 1.2, 1.4, 50750

Feature: For checking and setting the camshaft and crankshaft in correct TDC position.
Covers a wide range of Vauxhall/Opel and Chevrolet petrol engines. Includes the necessary tools for setting and locking the camshafts and crankshaft. Also includes the pins for locking the timing chain tensioner.
Contents:
Crankshaft Locking Pin
Camshaft Setting Plate
VVT Sensor Setting Tool (1.0L)
VVT Sensor Setting Tool (1.2 & 1.4L)
Camshaft Sprocket Holding Tool
Chain Tensioner Locking Pin
Belt Tensioner Locking Pin
Applicable:
For Vauxhall / for Opel :
Adam 1.2 1.4 (2012- ), Ampera 1.4 (2011- ),
Astra-J 1.4 (2009),
Corsa-D 1.0 1.2 1.4 (2009-),Cascada 1.4 (2013-),
Insignia 1.4 (2011-), Meriva-B 1.4 (2010-),
Mokka 1.4 (2012-), Zafira-C Tourer  1.4 (2011-)
For Chevrolet:
Aveo1.2 1.4 (2011-), Cruze 1.4 (2011-), Orlando 1.4 (2012-)
Engine Codes:
1.0/1.0 Ecoflex: A10XEP
1.2/1.2 Ecoflex: A12XEL, A12XER, LWD/A12XEL, L2Q/A12XEL, LDC/A12XER
1.4/1.4 Ecoflex: A14XER, LDD/A14XEL, LDD/A14XER, LUH/A14NEL, LUJ/A14NEL, LUJ/A14NET

Made in : China

Engine Timing Tool Kit Ford 1.6 Duratec Ti-VCT, 1.6 EcoBoost, 50730

For replacing timing belt on engines Ford 1.6 Duratec Ti-VCT, 1.6 EcoBoost.
Camshaft, crankshaft and flywheel pins are also suitable for many other petrol and diesel Ford engines.
Used to lock the camshafts in their timed position when engine repair or rebuild requires the cam pulleys to be removed and timed.

Contents:
Tensioner Pulley Locking Pin – OEM No. 303 1054
Crankshaft Locking Tool – OEM No. 303 748
Camshaft Sprocket Locking Tool – OEM No. 303 1097
Flywheel Timing Pin – OEM No. 303 1059
Camshaft/Crankshaft Pin – OEM No. 303 735
Camshaft Setting Bar – OEM No. 303 1552
Camshaft Setting Plate – OEM No. 21-162B/303-376/303-376B
Crank TDC Location Pin – OEM No. 21-163/303-620
Application:
Ford:
- B-MAX (2012-2018)
- C-MAX (2007-2010), C-MAX (2010-2020), Grand C-MAX (2010-2020)
- Fiesta (2008-2018)
- Focus (2004-2011), Focus C-MAX (2004-2011), Focus MK3 (2011-2018)
- Galaxy (2010-2020)
- Kuga (2013-2020)
- Mondeo MK3 (2006-2012), Mondeo MK4 (2012-2022)
- S-MAX (2010-onwards)
- Tourneo Connect (2013-2015)
- Transit Connect (2013-2016)
Volvo:
- S60 (2011-2015)
- S80 (2010-2015)
- V40 (2012-2015)
- V60 (2011-2015)
- V70 (2010-2015)
Ford 1.6 Duratec Ti-VCT: Focus C-MAX.
Ford 1.6 EcoBoost: B-MAX, C-MAX, Fiesta, Focus, Galaxy, Grand C-MAX, Kuga, Mondeo, S-MAX, Tourneo Connect, Transit Connect.
Engine code:
- 1.5 EcoBoost - BNMA, BNMB, BNMC, M8DA, M8DB, M8DD, M8DE, M8DF, M8MA, M8MB, M8MC, M8MD, M9DA, M9DB, M9DG, M9DH, M9MA, M9MB, M9MC, M9MD, M9ME, UNCA, UNCB, UNCC, UNCD, UNCE, UNCF, UNCI, UNCJ, UNCK, UNCM, UNCN, UNCP
- 1.5 Ti-VCT - ENUE, UEJB, UEJB, UEJE
- 1.6 EcoBoost - IQJA, IQJC, JQDA, JQDB, JQGA, JQMA, JQMB, JTBA, JTBB, JTDA, JTDB, JTJA, JTJB, JTJC, JTMA, JTWA, JTWB
- 1.6 GTDi - B4164T, B4164T2, B4164T3, B4164T4
- 1.6 Ti-VCT - HXDA, HXDB, HXJA, HXJB, HXJE, IQDA, IQDB, IQDC, IQJA, IQJC, IQJE, KGBA, MUDA, MUDD, PNBA, PNDA, PNDD, RHBA, RVJA, SIDA, U5JA, XTDA, XTDB
OEM No.: 303-1552, 303-1550, 303-1097, 303-1054, 303-748, 303-1059, 303-735.

Made in China

Engine timing tool set - BMW Vanos V8 X6M M-SERIES 550i 750i N63 S63 N74, 50668

Features: Specific tool kit that is required to perform camshaft and VANOS timing for BMW N63 and S63 engines.

Contents:
Crankshaft Alignment Tool – OEM No. 11 8 570
Camshaft Alignment Tool Retaining Bolt and Holder – OEM No. 11 9 891,11 9 892
Camshaft Alignment Tool(2) – OEM No. 11 9 893
Crankshaft Timing Pin – OEM No. 11 9 190

Made in China

Timing belt tensioner wrench - Renault, 50663

Features: To apply tension to the timing belt during timing belt changing or to repair the engine.
OEM No .: MOT 1135
Application: Renault 1.1L; 1.2L; 1.4L; 2.0L; 2.2L petrol engines (80 - 05).

Petrol Engine Setting/Locking Kit for BMW N62/N62TU V8, N73 V12 - Chain Drive, 50654         

Suitable for setting and adjusting the timing on BMW 3.6, 4.0, 4.4, 4.8 N62/N62TU V8 and 6.0 N73 V12 engines.
Kit includes camshaft setting plates, flywheel locking pin and chain pre-tensioning tool.            
OEM Tools: 11.9.190, 11.9.340, 11.9.461, 11.9.462, 11.9.463        
Applications: 540i E60/61 (05-10), 545i E60/61 (03-06), 550i E60/61 (05-10), 645i E63/64 (03-06), 650i E63/64 (05-11), 735i E65/66 (02-05), 740i E65/66 (05-08), 745i E65/66 (02-05), 750i E65/66 (05-08), 760i E65/66 (02-08), X5 4.4 E53 (03-07), X5 4.8 E53/E70 (04-10)
Engine Codes:
N62/N62TU V8: B36A, B40A, B44A, B48B
N73 V12: B60A...

Ball Joint Separator 46 mm, 093-4323E
Jaw size: 46 mm

Timing tool set BMW M60, M62, M62TU - Vanos engine,  50653

Contents:
M60 M62 Camshaft Alignment / Timing Tools:  OEM No. B112440
M62 VANOS Camshaft Timing Tool: OEM No. 116450
Rigid chain tensioner: OEM No 114230
VANOS Electromagnetic Valve Socket: OEM No. 116420
M62 Chain Tensioning Bracket Trestle:
TDC pin: OEM No. 112300

Petrol engine Timing tool set for Renault & Volvo 2.0 & 2.5, 50620

Contents:
Camshaft timing tool
Tensioning Tool for auxiliary drive belt
Crankshaft TDC locking tool
OEM No.  MOT1340; OEM MOT1348; OEM MOT1337
Applicable:
Renault Laguna 2.0 16V / 2.5 20V (1996-1999)
Renault Safrane 2.0 16V / 2.5 20V (1996-2001)
Volvo 850 (1992-1997)
Volvo C70 (1998-2002)
Volvo S40 (1996-2004)
Volvo V40 (1996-2004)
Volvo S60 (2001-2005)
Volvo S70 (1997-2000)
Volvo S80 (1999-2005)
Engine code:
Renault: N7Q 704/710/711 (2.0 16V), N7U 700/701 (2.5 20V)
Volvo: B4164S, B4164S2, B4184S, B4184S2, B4184S3, B4184S9, B4184S10, B4194T, BS194T2, B420S4, B4204S2, B4204T, B4204T2, B4204T3, B4204T5, B5202Fs, B5204FT, B5204T2, B5204T3, B5204T4, B5204T5, B5234FS, B5204FT, B5234T3, B5234T4, B5234T5, B5234T6, B5234T7, B5234T8, B5234T9, B5244S, B5244S2, B5244SG, B5244SG2, B5244T, B5244T3, B5244T4, B5244T5, B5244T7, B5252FS, B5254T, B5254T2, B5254T4...

Petrol engine timing/ locking tool set - BMW M40, M42, M50, M60, M62, M70, 50616

OEM No.11 2 300, 11 4 120, 11 3 190, 11 2 443/11 2 444, 11 3 240/11 3 390/11 4 220/11 7 380
Applicable: BMW
316 1.6 E36 (93-99), 316 1.6 E36 Compact (94-01),
316 1.6 E46 (98-04), 316 1.6 E46 (99-01) 318 1.8 E30 16v (89-91),
318 1.8 E36 S/Coupe (92-98), 318 1.8 E36 (93-99),
318 1.8ti E36 (94-98), 318 1.8 E36 S/Coupe (96-99),
318 1.8ti E36 Compact (96-01), 318 1.8 E46 (98-04),
320 2.0 E36 24v (91-97), 325 2.5 E36 24v (91-97),
518 1.8 E34 (94-96), 520 2.0 E34 24v (89-96),
525 2.5 E34 24v (89-96), 535 3.5 E39 (96-00) 540 4.0 E39 (96-00),
735 3.5 E38 (96-02), 740 4.0 E38 (96-02), 750 5.0 E32/38 (87-02),
840 4.0 E31 (93-99), 850 5.0 E31 (90-99), Z3 1.9 (96-99),
Z3 1.9 (99-03)
Engine code: 164E2, 164E3 M43, 184E2, 184S1, 194E1 M43, 194S1 M44, 206S2, 256S1, 256S2, 358S1, 448S1 M62, M70, M73, S70...