INSTRUMENTS

2 pcs Alternator bit socket M10, 50355A

1pc 1/2" Dr. Spline (XZN) socket bit M10x110mmL

1pc Reaction sorkscrew cap 33 teeth-Ø19mm-17mm hex

Aplication: VW-Audi, Skoda, Porsche, BMW, Ford, Mercedes-Benz ...

Made in China

Extra Long PSA Exhaust Pipe Spring Clamp Pliers, 50485

Features:
For expanding of exhaust clamps when changing the exhaust pipe.
Applications: Citroen, Peugeot and Renault etc.
4 locking positions for easy working.
Opening width:20-60mm

Engine timing tool set OPEL/Vauxhall  1.6 SIDI, 50260

Comprehensive Vauxhall / Opel 1.6 SIDI petrol engine locking kit.
The kit provides the essential tools required when replacing the camshaft drive chains and for setting the engine timing.
Contents:
Two locking pins on the gear wheel of the balancing shaft
Two pins on the chain tensioner
Tools for holding and adjusting the shaft distribution
Crankshaft Seat Belt Retaining Tool, which meets 1/2 "Dr.
Application:
Vauxhall / Opel:
Astra J (2013-2015)
Zafira C Tourer (2013-2016)
Cascade (2013-2015)
Insignia Country Tourer (2014-2016)
Insignia (2013-2016)
Engines: 1.6 SIDI Turbo, SIDI Turbo EcoFLEX
Engine codes:
A16XHT, A16SHT, B16SHT, B16SHL and B16SHT
OEM Tools: EN-51147, 51153, 50513, 51148.

Made in China

DSC Clutch Installation and removal tool- Volvo, Ford, Chrysler, Dodge, 50178

Description:
Suitable for 6 speed DCT – dual clutch transmission (getrag 6 DCT450 / MPS6) on Volvo, Ford, Chrysler, Dodge.
Applicable:
Volvo: C30, C70 (06~), S40 (04~), S60 (11~), S80 (07~), S80L, V40 (13~), V40 Cross Country, V50, V60, V70 (08~), XC60.
Ford: Focus (04~), C-Max, S-Max, Galaxy, Mondeo (07~), Kuga (13~)
Chrysler: Sebring.
Dodge: Avenger, Journey.
OEM No. 9997435 (volvo) / 308-763 (Ford)

Made in China

Flare nut wrench 12-14 mm, C7511214

Material: Cr-V

Made in Pard, Taiwan

Engine timing tool set - Audi/VW 2.0; 2.8; 3.0, 50077

Description:
For setting the engine timing when replacing the cylinder head gasket, camshaft, etc.
Suitable for Audi A6, Q5
Contents:
2x Camshaft locking tool, OEM T40133
Crankshaft locking pin, OEM T40069
Chain tensioner locking tool, OEM T40071
Crankshaft turning tool, OEM T40058
Engine applications: 2.5 FSI, 2.8 FSI, 3.0 TFSI, 3.2 FSI
Audi: A4 (2014 - 2015), A5 (2014 - 2017), A6 (2012 - 2018), A7 (2010 - 2018), A8 (2010 - 2018), S4 (2014 - 2017), S5 (2011 - 2017), Q5 (2008 - 2017), Q7 (2010 - 2018), SQ5 (2013 - 2017)
Volkswagen: Touareg 3.0 TFSI (2012 - 2017).
Porsche: Cayenne S Hybrid (2010 - 2014), Panamera (2011 - 2013)
OEM tools: T40133/1/2, T40058, T40069, T40071.
Use in accordance with OEM instructions only:
OEM1 T40133 /1 /2 | T40069 | T40071 | T40058 Audi
OEM2 T40133 /1 /2 | T40069 | T40071 | T40058 Seat
OEM3 T40133 /1 /2 | T40069 | T40071 | T40058 Skoda
OEM4 T40133 /1 /2 | T40069 | T40071 | T40058 Volkswagen

Made in China

Crankshaft locking tool set - Ford 2.2 TDCi, 50871

Features: To locking and time the crankshaft and flywheel correctly to allow for fitting of the TDC sensor.
Suitable for Ford Transit 2.2 TDCi engines from 2006, including Econetic and HDT engines.
Contents:
Crankshaft Locking Tool                                                         OEM# 303-1587
Flywheel Locking Tool for engines with Common Rail              OEM# 303-698 / 21-251
Timing Pump Locking Pin                                                        OEM# 0188H / 1860965000

OEM No.: 303-1587; 303-698 / 21-251; 0188H / 1860965000

Engine code: CYFA, CYFB, DRFA, DRFB, P8FA, P8FB, PGFA, PGFB, QVFA, QWFA, SRFA, SRFB, SRFC, SRFD, SRFE, UHFA, CYFC, DRFC, USRA

Made in China

11 Pcs Tamperproof Torx Screwdriver Set, 50919

Chrome vanadium steel.
Round shank shape, plastic and elastomer handle.
Magnetic tip.
Contents:
Totx: T6×3×75mm, T7×3×75mm, T8×3×75mm, T9×3×75mm
Tamperproof: T10×5×75mm, T15×5×75mm, T20×6×100mm, T25×6×100mm, T27×6×100,T30×6×125mm, T40×8×150mm

Made in China

Engine Timing Kit Fiat/ Alfa Romeo 1.4L, 50481

Features: To lock the camshaft and crankshaft in position to allow the removal and replacement of the timing belt fitted to the new generation 1.4 Fiat MultiAir engines.
Applicable:
Alfa Romeo:
MiTo    1.4 (105)               Engine code: 955A6.000
MiTo    1.4 (135)               Engine code: 955A2.000
Giulietta   1.4 (170)            Engine code: 940A2.000
Fiat:
Punto EVO   1.4 (105)      Engine code: 955A6.000
Punto EVO   1.4 (135)      Engine code: 955A2.000
Lancia:
Delta1.4                            Engine code: 955A7.000

OEM Tools No.: 2 000 035 100; 2 000 035 300; 2 00 035 200

Made in China

Fuel Tank Lock Ring Tool, 50866

To remove/install plastic fuel tank lock rings without damage
Compact design
Regulation range: 4" to 7-1/4"(100mm to 184mm)
Applicable: Works on many 2004 and newer vehicles including Ford F-150, Chevrolet pickups, Chrysler/Dodge mini vans, PT Cruiser, Dakota and Durango also works on smaller GM serrated rings and traditional rings.

Made in China

Engine timing tool set Mercedes Benz - Chrysler – Jeep, 50378

Suitable for both petrole and diesel engines.
The kit includes flywheel locking tools and a camshaft locking plate.
Contents:
2 pcs. Camshaft locking pins
Flywheel plate locking tool
Flywheel fixing tool with M6 x 90 mm bolts
Suitable for the following vehicles:
Models: Mercedes Benz, Chrysler, Jeep.
Mercedes:
CDI-C Class 2.0 (03-08), 2.2 (98-04), 2.2 (03-08), 2.2 (07-09), 2.7 (00-06)
E-Class 2.0 (02-09), 2.2 (98-03), 2.2 (02-09), 2.7 (98-03), 2.7 (02-09), 3.0 (02-09), 3.2 (98-03), 3.2 (02-09)
G-Wagen 2.7 (01-05)
M-Class 2.7 (99-05)
S-Class 3.2 (99-03)
Sprinter 2.7 (99-06)
V-Class 2.2 (99-03)
Viano 2.0 (03-09), 2.2 (03-09)
Vito 2.2 (99-03), 2.2 (03-09)
Chrysler:
CRD-PT Cruiser 2.2 (02-08)
Jeep Grand Cherokee 2.7 (01-05)
Engine code:
611.960/961/962/980
612.961/962/963/965/967/981
613.960
646.811/812/951/961/962/963/820/821/982/983/966
647.961/982
648.961
EDJ
OEM No.: 111589031500/8929; 601589024000/8932; 602589004000/8933

Made in China

Engine Locking Timing Tool Kit-Ford-Mazda, 50375

Description:

Designed for pulling off the camshaft timing belt wheel and locking or positioning the engine output shafts such as the camshaft and the crankshaft.
Required for changing the timing belt or for engine
Applicable:
FORD 1.8 D/TD/TDCI diesel and 1.25 - 2.0 16V Zetec petrol engine e.g
FORD Fiesta, Fscore / Oruon, Focus, Puma, Sierra, Modeo, Cougar, Couier / Kombi, P100
Mazda 121

Contents:
Crankshaft/Fuel Pump Alignment Pins x2pcs (5.8mm) - 21-260, 303 732
Crankshaft TDC Locking Pin - 21-163, 303 620
Crankshaft Timing Pin - 21-210, 303-507
Crankshaft Timing Pin - 303-193, 21-163
Flywheel Locking Tool - 21-168, 303-393
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Setting Strap - 303-376, 303-367, 21-162B
Timing Pin - 21-210, 303-620
Crankshaft Timing Tool - 21-159, 303-748

Made in China

19 Pcs 1/2" Dr. Gear Lock Socket Set, 50798

Professional quality.
Made from top grade Chrome Vanadium Steel for durability and lasting strength.
Satin finish.
These special gear lock sockets provide a profile that can be used on hex or double hex and T star profiles.
Also suitable for metric and imperial size nuts or bolts and T-star profiles
With 1/2’’ Dr. Ratchet handle
Sizes include:
Metric sizes: 8, 9,10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm
Inch sizes: 5/16 ", 11/32", 3/8 ", 7/16", 15/32 ", 1/2", 9/16 ", 19/32", 5/8 ", 21 / 32 ", 11/16", 3/4 ", 25/32", 13/16 ",
7/8", 15/16 ", 1-1 / 16" 1-3 / 16 ", 1- 1/4 "
E-profile sizes: E10, E12, E14, E16, E18, E20, E22, E24, E26, E28, E30, E34, E38, E40

Made in China

Diesel engine timing tools - Ford 1.8 TDDi/TDCi – chine drive, 50328

The kit contains basic tools for timing belt replacement for 1.8D TDi / TDCi diesel engines, fitted for Ford vehicles, suitable for high pressure fuel pump Wet Belt applications. Features injection high pressure pump sprocket removal and timing chain cover alignment tools
Application:
For Ford: C-MAX (07-10), Courier (00-02),
Fiesta (00-02),
Focus (98-11), Focus C-MAX (03-07),
Galaxy (06-10),
Mondeo (07-10),
S-MAX (06-14),
Tourneo Connect (02-13), Transit Connect (02-13)
Engine Code:
1.8D TDCi: BHPA, F9DA, F9DB, FFBA, FFDA, FFWA, HCPA, HCPB, KHBA, KKDA, KKDB, P7PA, P9PA, P9PB, QYBA, QYWA, R2PA, R3PA, RWPA, RWPC
1.8D TDCi ECOnetic: KHBA
1.8D Tdi: BHDA, BHDB, BHPA, C9DA, C9DB, C9DC
1.8D Turbo: C9DC, RTN, RTP, RTQ
OEM Tools:
For Ford: 303-193 (21-104), 303-393 (21-168), 303-376 (21-162B), 303-652 (21-230), 310-095 (23-067)

Made in China

4 pcs Pry Bar Set with Hammer Cap, 50778

Ideal for all kinds of applications on trucks and other heavy vehicles.
Go through blade and hammer cap.
Two component handle: Comfortable, extra large bi-material handle provides superior grip
Material of blade: Cr-V.
Contents:
1 pc pry bar 0°, length 915mm
1 pc pry bar 30°, length 915mm
1 pc pry bar 75°, length 610mm
1 pc pry bar 90°, length 610mm

Made in China