INSTRUMENTS

3 Jaw Internal & External Puller Set, 50153

Dimensions:
Internal bearing extractor: 15 mm - 30 mm
Inner bearing extractor: 30 mm - 80 mm
External bearing extractor: 15 mm - 80 mm.
Locking the nut to open the jaws and secure the bearing. Then use the reverse hammer to pull the bearing.

Made in China

Engine Timing tool kit -  BMW  N47; N47S; N57, 50070

Suitable for setting the camshaft in diesel engines with chain drive. For turbocharged BMW 4 & 8 cylinder diesel engines with the motor identification letters N47, N47S, N57 or N57S.

Set includes:
Crankshaft lathe – OEM No. 116480
Camshaft locking – OEM No.  118750
Camshaft lock OEM 118760
Sprocket Puller OEM 118740/118741
Crankshaft wheel locking pin OEM 115320
Crankshaft holding tool OEM 114320
Crankshaft locking tool OEM 118790
2 x piece pin to lock the chain tensioner OEM 113340

Applicable :
For BMW
Series 1: 116d 118d 120d 123d (E81, E82, E87, E88, F20)
Series 3: 316d 318d 320d 325d 330d (E90, E91, E92, E93, F30)
Series 5: 520d 525d 530d 530d 535d 535d GT GT M550d (E60, E61, F07, F10, F11)
Series 6: 640d (F12)
Series 7: 730d 740d 750D (F01)
Series X1: 1.8d, 2.0d, 2.3d, (E84)
Series X3: 1.8d, 2.0d, 3.0d, 3.5D (F25, E83)
Series X5: 3.0d, 4.0d, M5.0d, (E70)
Series X6: 3.0d ; 4.0d; M5.0d, (E71)

Engine Codes:
2.0 N47 and N47S (2007-2015)

Made in China

BMW Vanos Sprocket turning wrench for M50 and M52 engines, 50053

Features: Used to adjust Vanos position on the BMW M50 and M52 engines.

Applicable: BMW E36 320i; E34 520i; E36 325i; E34 525i; E46 328i;

Engine codes: M50B20, M50B25, M52B28, S50B30US, S52B32

OEM No.: 115490

Made in China

2-Jaw Gear puller 80х100, 50141D

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 100 mm
Axis width: 80 mm

Made in China

Audi Oil Dipstick, 50931B

Designed to measure the engine oil levels on Audi vehicles fitted with electronic oil level systems.

Designed to measure the engine oil levels on Audi vehicles fitted with electronic oil level systems.
Can also be used to calibrate the driver's instrument panel.
Application: Audi 2.0 TFSI, 3.2 FSI, 3.0 Supercharged, 4.2 FSI, 2.0 TDI CR.

Made in China

2-Jaw Gear puller 120х100, 50141A

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 100 mm
Axis width: 120 mm

Made in China

Pump Removal Tool BMW N47/N47S and N57, 50880

Used to remove fuel pump.

Suitable for BMW N47/N47S, N57 engines.
OEM No.  118740
Made in China

2-Jaw Gear puller 150х150, 50141B

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 150 mm
Axis width: 150 mm

Made in China

Engine Timing Tool Set-Mercedes M133 / M270 / M274, 50858

Designed for disassembling and assembling of the camshafts on vehicles fitted with the chain driven 1.6/2.0 direct injection petrol engine.
Content:
Camshaft clamping assembly (chain end) + fixing bolts (OEM 270589006100)
Camshaft clamping assembly (gearbox end) + fixing bolts (OEM 270589006100)
Small diameter camshaft blocks (OEM 270589006100)
Special Star socket bit T100 for the camshaft pulleys (OEM: 270589006100)
Application: 
Mercedes-Benz M133, M270, M274. 
These engines are found in the late A Class, B Class CLA, C Class and E Class vehicles.
Models:
Mercedes A-Class 176 1.6/2.0 (since 2012)
Mercedes B-Class 242/246 1.6/2.0 (since 2012)
Mercedes CLA 117 1.6/2.0 (since 2012)
Mercedes C-Class 204 1.6/2.0 (since 2011)
Mercedes C-Class COUPÉ 1.6/2.0 (since 2011)
Mercedes E-Class 212 1.6/2.0 (since 2011)
Engine Codes: M133; M270; M274

Made in China

2-Jaw Gear puller 200х150, 50141C

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 150 mm
Axis width: 200 mm

Made in China

Engine Timing Tool - Renault/Nissan & Vauxhall/Opel 2.0/2.3 DCi/CDTi-M9R/M9T – Chain drive, 50828

Timing Setting and Locking Tool Kit for 2.0/2.3 DCi/CDTi Chain Drive Engines. Fitted for Nissan, Renault and for Vauxhall /Opel Vehicles, with M9R & M9T Engine Codes
To keep Camshaft, Injection Pump Shaft, Crankshaft in a Specific Position when changing a Timing Belt, or during other Engine Repairs and to Remove and Replace the Injection Pump.

OEM Tools: MOT1766, M0T1769, MOT1770, MOT1773, EN-48330, EN-48332, EN-48334, EN-48831, KM-6130

Application:
Renault:
Espace/Grand Espace IV (06-10), Kaleos (08-11),
Laguna ll (05-07), Laguna lll (07-12), Master lll (10-12),
Magane ll (06-10), Scenic/Grand Scenic ll (06-09),
Scenic/Grand Scenic lll (09-12), Trafic ll (06-12), Vel Satis (05-10), Nissan: Primastar X83 (06-10), Qashqai/Qashqai+2 J10 (07-10),
X-Trail T31 (07-12);
Vauxhall/Opel: Movano-B (10-12), Vivaro (06-12)
Engine code:
M9R 2.0dCi: 610, 615, 630, 700, 721, 740, 742, 760, 761, 762, 763, 780, 782, 784, 786, 788, 800, 802, 803, 805, 808, 816, 830, 832, 833;
M9T 2.3dCi: 670, 672, 676, 678, 680, 686, 690, 692, 694, 698

Made in: China

5 pcs Inner bearing puller, 50140

The kit consists of a slide hammer (2 Lb-980 g) and a set of extractors of various sizes needed to pulling internal bearings.
Capacity: 3/8 "(10mm) - 1-1 / 4" (32mm)
Contents:
Slide hammer - 980 g
Bearing extractor: 3/8 "to 1/2" (10 mm-14 mm)
Bearing extractor: 9/16 "to 11/16" (15mm-19mm)
Bearing extractor: 5/8 "to 1" (18mm-25mm)
Bearing extractor: 1 "to 1-1 / 4" (25mm-32mm)
Come with a carry case.

Made in China

Engine timing tool set – FIAT 1.3 JTD, 50824

Applications:
Alfa Romeo
MiTo / Fiat: 500, Albea (TR), Doblo/Cargo, Fiorino, Grande Punto, Idea, Linea, Panda, Puntı, Punto Evo
Ford: Ka Lancia: Musa, Ypsilon
Suzuki: Splash, Swift, Wagon R+ Ignes
Vauxhall Opel: Agila, Agila B, Astra-H, Astra-J, Combo-C, Corsa-C, Corsa-D, Meriva-A, Meriva-B, Tigra-B

Made in China

7 pcs air conditioning A/C fuel line disconnect tool set, 50129

Features: Easily disconnects air conditioning lines and quick connect fuel lines 
Specification:
- Simple assembly and disassembly of quick connectors for automotive air conditioning duct and fuel pipelines, easily disconnected;
- Practical, easy, and affordable;
Weight”116 g 
Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"

Made in China

Mercedes Benz M156 M159 Engine Timing Camshaft Tool, 50656

Tool for adjusting the timing (timing chain change) for Mercedes Benz 6.2L V8 with:
- M156 Engine: C63, CLK63, ML63, R63, E63, S63, SL63 (AMG)
- M159 Engine: SLS (AMG)

Contents:
Camshaft locking tool: OEM: 156 589 00 61 00
Camshaft position sensor adjustment tool: OEM: 156 589 00 32 00
Setting tool for two piece intake camshaft sprocket: OEM: 156 589 01 63 00
Application:
Benz AMG 156, ML63 AMG. S 63L AMG. S 63 AMG
R63 AMG L4matic, R63AMG 4 MATIC, E 63 AMG CLS 63 AMG CLK 63 AMG
CLK 63 AMG Black Series
CLK 63 AMG Cabrio
CL63 AMG

Made in China