INSTRUMENTS

The VAG 3-Pin Brake Piston Wind Back Tool 50161 is an indispensable tool for servicing rear brake calipers on VAG models with an electronic park brake. After retracting the electronic park brake mechanism (software controlled), use this adapter with a wind back tool to reset caliper pistons for new pad installation.

Key Features:

• Essential for VAG models with electronic park brakes.
• 3/8"Dr. and two pin drive option for flexibility.
• Compatible with Renault Megane, Scenic, and Volvo models.
• Outside diameter: 39mm.

18” (460 mm) Magnetic tool holder, 50246-18

Convenient organizer for various tools as screwdriver, ratchet, hammer etc.
Screw and fasten on the wall.
Length: 460 mm (18 ”)

Made in China

Snap ring pliers (internal 90° bent tip 1.8 mm), 60905ABC

Capacity: 8-25 mm

Made in Force, Taiwan

Professional 24mm deep socket with a narrow lateral slot, designed for the safe removal and installation of oxygen sensors. The narrow slot design provides maximum socket strength while protecting the sensor wiring.

Ford 3.5L, 3.7L, 4.0L - Engine Timing Tool Set, 50574

Used to hold the camshafts in the TDS position and retain the tensioner in the compressed position.
Suitable for Ford 3.5L, 3.7L, 4.0L engines form 2007.

Ensure precise engine timing with our timing tool kit, compatible with Ford 3.5L, 3.7L, and 4.0L engines from 2007 onward.
This kit is designed to lock the camshafts in the TDC position and hold the tensioner in a compressed state, ensuring optimal engine performance.
Compatible with a wide range of Ford and Lincoln models, including the Edge, Explorer, F-150, Flex, and many others.

OEM Tools: 303-1248; 303-1530

Made in China

1/2" Drive Torque Wrench 20 - 120Nm, T0003

Torque range: 20 - 120Nm (14.8 - 88.6 lbf-ft)
Scale: 1.0Nm / 0.7lbf-ft.
Accuracy: ±3%.
Reversible ratchet mechanism with 72 teeth.
Aluminium knurled handle for comfort and control.
Length: 430 mm.

Made in China

21 Pcs 1/4" Drive Torque Wrench Set 1 - 25Nm, 51278

Ideal for precise screws and nuts installation.

Sockets material: Cr-V steel
Bits material: S2 steel
Torque range: 1 - 25Nm (0.7 - 18.5lbf-ft).
Scale: 0.2Nm / 0.15lbf-ft.
Accuracy: ±3%.
Drive Square Size: 1/4"
Contains:
Torque Wrench 1 - 25Nm, 72 teeth
Universal Joint
Extension Bar 100mm
Adapter 1/4"F x 3/8"M
17x Bit Sockets1/4”Dr:
Phillips: PH1, PH2, PH3
Hex (37mm): H2, H2.5, H3, H4, H5, H6, H8, H10
Hex (62mm): H5
Torx (37mm Length): T10, T15, T20, T25, T30

Made in China

Hydraulic Drive Shaft Remover/Press Set, 50127

Used to press drive shafts out of wheel hubs.
For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 98-125 mm diameter circle.
Especially for glued and rusty drive shafts.
Has a 10 ton capacity.

Applicable: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.

Made in China

Pull Camp Car Body Alignment Tool (2-way), 51160

Bolt size M14×120mm
Claw width: 35mm
Overal length: 230mm.
One way pulling max 3 t
Side way pulling max. 1 t
Weight: 2 kgs

Made in China

Tire thread and brake lining gauge, 9B1802

Used to measure the amount of lining remaining on riveted and bonded drum shoes and disc brake pads.
Measures tire thread depth up to 9/16" in graduations of 1/64".
Checks pads without having to remove caliper completely.

Made in Taiwan

12” (305 mm) Magnetic tool holder, 50246-12

Convenient organizer for various tools as screwdriver, ratchet, hammer etc.
Screw and fasten on the wall.
Length: 305 mm (12 ”)

Made in China

Snap ring pliers (internal straight tip 1.8 mm), 60905ASC

Capacity: 8-25 mm

Made in: Taiwan, Force

Professional 24mm deep socket with a 1/2" drive, specifically designed for the removal and installation of oxygen (lambda) sensors. The wide lateral slot allows the socket to fit over the sensor's wiring without causing damage.

Tackle tough jobs with confidence using our 3/4" Drive E-Torx Deep Impact Socket E24. This socket is engineered for demanding applications, providing exceptional strength and durability.

Key Features:

• 3/4" Drive: Delivers high torque for heavy-duty tasks.
• E24 Torx Size: Specifically designed for E24 Torx fasteners.
• Deep Socket Design: Allows access to fasteners in recessed areas.
• Impact Rated: Constructed from high-strength steel to withstand the forces of impact wrenches.

Built to last and perform, this impact socket is a must-have for any professional or serious DIYer.

1/2" Drive Torque Wrench 40 - 220Nm, T0002

Torque range: 40 - 220Nm (29.5 - 162.4lbf-ft)
Scale: 1.0Nm / 0.7lbf-ft.
Accuracy: ±3%.
Reversible ratchet mechanism with 72 teeth.
Aluminium knurled handle for comfort and control.
Length: 520 mm.

Made in China