INSTRUMENTS

3 pcs Seal puller set, 50637

For quickly and easily remove grease and oil seals and O-rings
A specially curved tip facilitates removal.
Available in the following lengths: 165, 117, 150 mm.
Easy to use.

Made in China

Fill Plug Socket - T55 Inside TORX - 17 mm Drive, 04A101755

Size: T55 x 17 mm
Saves time when checking, replacing and adding transmission fluid.
It makes it easier to remove and install the plug.

Code: 505135

Made in Taiwan

4 pcs Mercedes Benz transmission engine oil dipstick, 50931

Four color coded transmission engine oil dipsticks where the dipstick is not available with the vehicle.

 - Red: 1220mm long for gearbox oil on 722.6_L / G / P / V
- Green: 920mm long for gearbox oil on 722.7_P/722.8_P /16.5_V
- Blue: 930mm long for engine oil on M112 / M113 / 646 / 647 / 648
- Yellow: 930mm long for engine oil on 103.943 / 984 / 985 / 104 / 111 / 119 / 120 /137.603 / 913 / 963 / 97 / 604 / 605 / 606 / 611 / 612 / 613 / 628 / 612 / 965

Made in : China

3/8”Dr. Motorcycle front spindle socket, 50414

This tool has 4 - steped sizes and is suitable for developing the front axle spindle of the most popular motorcycles.
Used with a 3/8 "Dr.
Dimensions: 17, 19, 22 24 mm
Length: 63 mm ...

Oil filter spanner wrench 46 mm

Size: 46 mm - 12 pt.
Suitable for VW, Audi, Skoda, Seat
For removing and refittung differentialters - Haldex

Diesel engine setting/locking kit 2.3D JTD; 3.0D JTD; 3.0D Hdi, 50674
Suitable for adjustment and engagement of the Fiat 2.3D JTD diesel engine, the Fiat 3.0D JTD diesel engine and the Citroen / Peugeot 3.0D Hdi diesel engine (Chain Drive).
The set includes camshaft adjustment pins, crankshaft locking bolts and a locking sensor.

Application:

Citroen: Relay / Jumper III (06-12)

Fiat: Ducato (02-11)

Iveco: Daily (03-10); Daily / Eco Daily (09-11)

Peugeot: Boxer III (06-12)

Engine codes:

2.3D: F1AE0418A, F1AE0481B, F1AE0481C, F1AE0418D, F1AE0481F, F1AE0481FA, F1AE0481G, F1AE0481H, F1AE0481HA, F1AE0481N, F1AE0481UA, F1AE0481VA
3.0D : F1CE0481A, F1CE0481B, F1CE0481D, F1CE0481F, F1CE0481H, F1CE3481M
3.0HDi :    F30DTE; (F1CE0481D), (F1CE3481DM), (F1CE3481N)

OEM No. OEM Tools: 99360614/(-).0191/2.B, 99360615/2.000.018.200/(-).191/2.A, 99360608/1.860.617.000 

Made in China

BMW Crankshaft pulley holder (N47) , 780-8376
Used for dismantling and replacing the damper disc on BMW N47; N57.
For fixing  the crankshaft pulley when loosening or tightening the center pulley bolt.

11 7 221 - Bracket
11 7 222 - Handle: M8 for N47 / N57
11 7 223 - Screw: M8 for N47 / N57
11 7 224 - Handle: M10 for N47TU / N57TU
11 7 225 - Screw: M10 for N47TU / N57TU
11 6 480 - Crankshaft Rotor Tool
Application: BMW: 325,330,335,525,530,535,730

Made in Taiwan

Piston ring compressor, 53-175 мм, 50090

High-quality spring steel wraps construction and tensioning mechanism.
Height: 75 mm (3 ")
Capacity: 53-175 mm (2-1 / 8 "to 7")
Supplied with quadrilateral key.

Engine timing tool set for VAG 2.4 & 3.2 FSI, 50600

For checking and adjusting the engine timing suitable for Audi V6, V8 and V10 engines with chain

Contents:
- Camshaft locking tool - (use as OEM T40070)
- Crankshaft locking pin - (use as OEM T40069)
- Chain tensioner locking pin - (use as OEM T40071)

Application:
VW:
Jetta ab 2005J.
AUDI:
A4, RS4, S5, A6 / Allroad, A8, S8, R8, Q7 ab 2005J.

2,4 V6 – BDW
3,2 V6 FSI – AUK, BGP, BGQ, BKH, BPK
4,2 V8 FSI – BVJ, BNS, BYH, CAUA
5,2 V10 FSI – BXA, BSM

For checking and adjusting the engine timing
suitable for Audi V6, V8 and V10 engines with chain

40" Breaker bar 3/4"Dr., 50002A

Suitable for to break and loosen rusted, stubborn or stuck nuts and bolts.
Used with sockets 3/4 "Dr.
Overall length: 1015 mm (40 ")
Head Material: Cr-Mo

Made in China

Timing locking tool set for three-cylinder 1.2L VAG engines, 50332
Application:
     VW POLO, 3 cyl engines 1.2 12V from 2002
     SKODA FABIA, 3 cyl engines 1.2 12V from 2003
     Engine codes: AZQ, BME

ОЕМ: Т10414

Made in China

24" Breaker bar 1/2"Dr., 50002

Suitable for to break and loosen rusted, stubborn or stuck nuts and bolts.
Used with sockets 1/2 "Dr.
Overall length: 615 mm (24 ")
Head Material: Cr-Mo

Made in China

6 pcs Slide hammer injector puller set for Mercedes Benz CDI engines

Designed for fast and professional remove of Mercedes-Benz car injectors without the need to remove the cylinder block.
Components made of CR-Mo and S45C steel.
Suitable Mercedes with CDI engines.
Application: For Mercedes-Benz CDI engines 611.612.613, etc.

111 Pcs 1/4", 1/2" Drive Socket Set, 10111

Material: CR-V
Set contains:
1/2" Drive
17 pcs  6-pt Flank Socket: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm
5 pcs    6-pt Flank Deep Socket: 14, 15, 17, 19, 22mm
8 pcs    Star Socket: E10, E11, E12, E14, E16, E18, E20, E24
1 pc      72 Teeth Ratchet Handle
2 pcs    Extension Bar: 125mm, 250mm
1 pc      Universal Joint
1 pc      3 Way Adapter
2 pcs    Spark Plug Socket: 16mm, 21mm
1 pc      Bit Holder 5/16"
17 pcs  Bits 5/16" x 30mm(L):
              Torx: T40, T45, T50, T55, T60
              Hex: 7, 8, 10, 12, 14 mm
              FD: 8, 10, 12 mm
              Phillips: PH3, PH4
              Pozidriv: PZ3, PZ4

1/4" Drive
13 pcs  6-pt Flank Socket: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
8 pcs    6-pt Flank Deep Socket: 6, 7, 8, 9, 10, 11, 12, 13 mm
5 pcs    Star Socket: E4, E5, E6, E7, E8
1 pc      72 Teeth Ratchet Handle
1 pc      Universal Joint
2 pcs    Extension Bar: 50 mm, 100 mm
1 pc      Sliding T-bar, 115mm
1 pc      Spinner handle, 150mm
1 pc      1/4" Drive Flexible Extension Bar
1 pc      1/4"× 1/4" Square-Hexagonal Adapter
4 pcs    Hex Key Wrench: 1.27, 1.5, 2, 2.5 mm
18 pcs  Bit Socket:
              Torx: T8, T10, T15, T20, T25, T27, T30
              FD: 4, 5.5, 7 mm
              Hex: 3, 4, 5, 6 mm
              Phillips: PH1, PH2
              Pozidriv: PZ1, PZ2

Made in China