INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
6 pcs Slide hammer injector puller set for Mercedes Benz CDI engines
6 pcs Slide hammer injector puller set for Mercedes Benz CDI engines
Designed for fast and professional remove of Mercedes-Benz car injectors without the need to remove the cylinder block.
Components made of CR-Mo and S45C steel.
Suitable Mercedes with CDI engines.
Application: For Mercedes-Benz CDI engines 611.612.613, etc.
SAC (Self-adjusting connectors) Clutch Disassembly and Assembly kit , 50442
SAC Clutch Disassembly and Assembly kit , 50442
For quick and professional disassembly and installation of SAC (self-adjusting connectors).
It fits with almost all SAC connectors with step 3 and 4 holes from VAG, BMW, Opel, Volvo, Renault and others.
Applicable to the following car models:
- AUDI A3, A4, A6, A8
- VW Passat, Golf, Sharan, Tiguan
- FORD Mondeo, S-max, Galaxy, Transit
- Mercedes C, E, CLS, S, CLK, SLK, SL
- BMW 320, 330, 520, 530
- Alfa Romeo 147, 159, 166
- FIAT Ulysse, Chroma, Ducato
- Lancia Phedra, Theisis
Made in China
3 pcs Seal puller set, 50637
3 pcs Seal puller set, 50637
For quickly and easily remove grease and oil seals and O-rings
A specially curved tip facilitates removal.
Available in the following lengths: 165, 117, 150 mm.
Easy to use.
Made in China
6" Strap Oil Filter Wrench, 211-0611
6" Strap Oil Filter Wrench, 211-0611
Range: Up to 6" (150 mm)
Use with 1/2"Dr. Ratchet
Strong nylon belt will not slip
Oil filter wrench, 096-3102A
Oil filter wrench, 096-3102A
Working range: 63 - 102 mm
Working with ratchet handle 3/8" DR. and 1/2" DR.
Made in Taiwan
3/8”Dr. Motorcycle front spindle socket, 50414
3/8”Dr. Motorcycle front spindle socket, 50414
This tool has 4 - steped sizes and is suitable for developing the front axle spindle of the most popular motorcycles.
Used with a 3/8 "Dr.
Dimensions: 17, 19, 22 24 mm
Length: 63 mm ...
Oil filter wrench, 209-0036
Oil filter wrench, 209-0036
Working range: 63-102мм ( 2-1/2"-4")
Working with ratchet handle 3/8" DR. and 1/2" DR.
Made in Taiwan
Ford Mazda Engine Timing Crank Cam Lock Flywheel Fuel Inject Belt Pulley, 50086
Get the job done right with the Ford Mazda Engine Timing Tool Set 50086. This comprehensive kit includes tools for adjusting and locking camshafts, locking the injection pump shaft, and tensioning the timing belt.
The kit is suitable for a wide range of Ford and Mazda engines, including 1.4L, 1.6L, 1.8L, 2.0L, and 2.3L variants, as well as ZETEC E and SE engines. It also works with Mazda 121 1.25 (16Valve) and Diesel engines from 1.4L to 1.9L.
This set includes essential components, such as camshaft and crankshaft alignment tools, flywheel locking tools, and injection locking pins, all made in China and designed to meet OEM standards.
- Adjustment and camshaft locking tool
- Pulling off crankshaft pulley tool
- Suitable for Ford and Mazda engines
Piston ring compressor, 53-175 мм, 50090
Piston ring compressor, 53-175 мм, 50090
High-quality spring steel wraps construction and tensioning mechanism.
Height: 75 mm (3 ")
Capacity: 53-175 mm (2-1 / 8 "to 7")
Supplied with quadrilateral key.
40" Breaker bar 3/4"Dr., 50002A
40" Breaker bar 3/4"Dr., 50002A
Suitable for to break and loosen rusted, stubborn or stuck nuts and bolts.
Used with sockets 3/4 "Dr.
Overall length: 1015 mm (40 ")
Head Material: Cr-Mo
Made in China
24" Breaker bar 1/2"Dr., 50002
24" Breaker bar 1/2"Dr., 50002
Suitable for to break and loosen rusted, stubborn or stuck nuts and bolts.
Used with sockets 1/2 "Dr.
Overall length: 615 mm (24 ")
Head Material: Cr-Mo
Made in China
Oil cheek for engines, MERCEDES AI050084
Oil dipstick for engines, AI050084
111 Pcs 1/4", 1/2" Drive Socket Set, 10111
111 Pcs 1/4", 1/2" Drive Socket Set, 10111
Material: CR-V
Set contains:
1/2" Drive
17 pcs 6-pt Flank Socket: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm
5 pcs 6-pt Flank Deep Socket: 14, 15, 17, 19, 22mm
8 pcs Star Socket: E10, E11, E12, E14, E16, E18, E20, E24
1 pc 72 Teeth Ratchet Handle
2 pcs Extension Bar: 125mm, 250mm
1 pc Universal Joint
1 pc 3 Way Adapter
2 pcs Spark Plug Socket: 16mm, 21mm
1 pc Bit Holder 5/16"
17 pcs Bits 5/16" x 30mm(L):
Torx: T40, T45, T50, T55, T60
Hex: 7, 8, 10, 12, 14 mm
FD: 8, 10, 12 mm
Phillips: PH3, PH4
Pozidriv: PZ3, PZ4
1/4" Drive
13 pcs 6-pt Flank Socket: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
8 pcs 6-pt Flank Deep Socket: 6, 7, 8, 9, 10, 11, 12, 13 mm
5 pcs Star Socket: E4, E5, E6, E7, E8
1 pc 72 Teeth Ratchet Handle
1 pc Universal Joint
2 pcs Extension Bar: 50 mm, 100 mm
1 pc Sliding T-bar, 115mm
1 pc Spinner handle, 150mm
1 pc 1/4" Drive Flexible Extension Bar
1 pc 1/4"× 1/4" Square-Hexagonal Adapter
4 pcs Hex Key Wrench: 1.27, 1.5, 2, 2.5 mm
18 pcs Bit Socket:
Torx: T8, T10, T15, T20, T25, T27, T30
FD: 4, 5.5, 7 mm
Hex: 3, 4, 5, 6 mm
Phillips: PH1, PH2
Pozidriv: PZ1, PZ2
Made in China
