INSTRUMENTS

Bearing separator set 75-105, 50134

Pul out the bearing with H-type beam and bolts
Capacity: 75-105mm
1 separator
1 main rod
4 pcs extensions

Camshaft alignment tool set - BMW M47, 50096

This set enables the correct timing to be made when servicing BMW M47 2.0 16 engines
This timing tool set includes crankshaft pin, camshaft setting plate, clamp for camshaft locking tool and the 2 necessary timing pins.
Included:
Crankshaft alignment pin
camshaft alignment tool
clamp assembly for camshaft alignment tool
2x tensioner locking pins
Aplication:
BMW; 118 2.0 E87 (03-07), 120 2.0 E87 (03-07), 318 2.0d/td E46/E90/91 (00-07),
320 2.0d/td E46/E90/91 (97-07), 325 3.0 E90/91/92/93 (06-08), 330 3.0d/xd/cd E46/E90/91/92/93 (98-08),
335 3.0 E90/91/92 (06-08), 520 2.0 E39/E60/61 (99-08), 525 3.0d/xd E39/E60/61 (99-08),
530 3.0d/xd E39/E60/61 (98-08), 535 3.0 E60/61 (04-08), 635 3.0 E63/61 (04-08),
730 3.0d/Ld E38/E65/66 (98-08), X3 2.0 E83 (03-07), X3 3.0d/sd E83 (03-08), X5 3.0 E53/E70 (00-08)
Land Rover; Range Rover 3.0Td6 (02-06), Freelander 2.0Td4 204D3 (00-06),
MG; ZT/T 2.0 (01-05), Rover; 75 2.0CDT/CDTi (99-05)
Engine cod:
BMW; M47, M47TU, M47T2, M57, M57TU, M57T2,
Land Rover; M47R, M57,
MG/Rover; M47R

OEM No.: 11 2 300, 11 6 320, 11 6 322, 11 3 340

The set is in blue case.

15 pcs Cup type oil filter wrench, 50037

Sizes::

• 65 mm, 14 pt.: CHAMP, HASTINGS, GM/Ac, WIX, NAPPA, PUROLATOR, DAIHATSU, TOYOTA, NISSAN
• 65-67 mm 14 pt.: Kanadai modellek HP4386, HP4967, HP6017, HP6018, DAIHATSU
• 68 mm 14 pt.: HASTINGS, MAZDA, FORD ESCORT, CAPRI, SUBARU, FRAN PH6607, MOTORCRAFT FL816
• 73 mm 14 pt.: TOYOTA, LEXUS
• 74-76 mm 15 pt. : FRAM, AC, STAUM
• 75-77 mm 15 pt.: VW, AUDI, CASITE, GM/AC, HASTINGS, WIX, NAPA FORD, ISUZU, MERCEDES, OPEL
• 74-76 mm 15 pt.: FRAM, AC, STAUM
• 76mm 30 стенен: MOTORCRAFT FL400A, FORD
• 80 mm 15 pt.: HASTINGS, FRAM, PUROLATOR, NISSAN, HONDA, MOTOCRAFT, MAZDA, ISUZU, SUBARU, OPEL, TOYOTA
• 82 mm 15 pt.: MAZDA, SUBARU, TOYOTA, HONDA
• 90 mm 15 pt.: HONDA ACCORD, MITSUBISHI, MOPAR, ISUZU
• 93 mm 15 pt.: CASITE, CHAMP, CHAMPION, GM, FRAN, HASTINGS, OPEL, MAZDA, VOLVO, MITSUBISHI, PUROLATOR, WIX, NISSAN, VW, PORSCHE, RENAULT, FORD, HONDA, AUDI
• 93 mm 36 pt.: MOTOCRAFT FL1A, FLA1B, FL300, FL820, FORD
• 100 mm 15 pt.: FARM, MOTOCRAFT, WIX, ISUZU MITSUBISHI

Press and pull sleeve kit 26 pcs, 50093
For the removal and installation of bushes / bearings and seals etc. Fully universal applications on both cars and LCV.
Contents - 22 x Press Sleeves
- Adapters (Gold):D44 х d34, D46 х d36, D54 х d44, D56 х d46, D58 х d48, D66 х d56, D68 х d58, D70 х d60, D78 х d68, D80 х d70, D82 х d72
- Adapters (Silver) - D48 х d38, D52 х d42, D60 х  d50, D62 х d52, D64 х d54, D72 х d62, D74 х d64, D76 х d66
Inside Diameter from 34-80mm in 2mm steps
Outside Diameter from 44-90mm in 2mm steps
Pulling Spindles with nuts and thrust bearings - M10. M12. M14. M16...

Mechanic's stethoscope, 50235

Features:

• This mechanics sonar scope helps isolate engine problems by letting you hear inside engine.
• Quality chromed steel construction with soft PVC hose and probe.
• There are two ends.
• The long metal adapter is for detecting noisy in hard-to-access areas
• The short adapter helps to capture noisy space.

Crankshaft Locking Tool W/Steel Plate, 50315
Description:
2.0 PD TDI Diesel engines with oval crankshaft pulley (non-bored engines).
Contents: injection pump drive pulley locking pin and belt tensioner locking plate.
Application:
•Models:
Audi: A4, A6
Seat: Alhambra, Altea, Leon, Toledo
Skoda: Octavia, Octavia RS, Superb
VW: Golf, Jetta, Passat, Sharan, Tiguan, Touran
•Engine codes: BDK, BKE, BLB, BMA, BMM,
BMP, BMR, BNA, BP ...

1/2" Dr. Torque Angle Gauge, 50369

Required when servicing many late model engines that use torque-to-yield fasteners
Measures angle of rotation after pre-torque in torque-angle applications
The 360 degree scale is marked in 2 degree increments and intervals of 10 and 30 degrees

Made in China

3 pcs injector extractor set

For removing seized or stuck Common Rail injectors without having to disassemble the cylinder head.
Applicable for MERCEDES-BENZ CDI engines 611, 612, 613, etc.
Contents: 1 pcs impact extractor, 1 pcs injector claw, 1 pcs external adapter with internal.

Made in China

CV Joint clamp banding tool with cutter, 096-81433

Tool is easy removed by sliding sideways after winding has been completed.

Use to install and tighten the "band-it" or strap style clamps on CV joint boots or on power steering rack and pinion steering gear boots.
Once installed into the tool tighten the band by turning the handle on the tool;
Use a socket or wrench on the handle to torque the band to OE specifications.
When the boot clamp has been tightened to specs cut the band to the correct length by flipping the lever (at the front of the tool) forward.
Features:
CV joint boot clamp wrench securely fastens band-it style free-end clamps
Roll band clips and pre-formed CV boot clamps
Use by turning the winding mandrel with a 1/2-inch socket or wrench
Measures 11-1/2 inches long
Works on All CV Boot Clamps, ATV,  UTV and some automotive applications.

9 pcs. Common rail Diesel injector puller extractor set
Description: Slide hammer for DB CDI-engines & Mercedes CDI engines OM 611, 612, 613, Mazda BT50, Hyundai, Sanyong, Jeep, ML 270  etc.
For removing stuck and the seized common-rail injectors without removing the cylinder head.
The sturdy construction will enable the swift removal of even the most severely seized in injector.
Most often injectors can be removed without damage, allowing the injector to be reused.

Puller For Ribbed Drive Pulley, 50146
Clamps onto any ribbed pulley and extracts it from the drive wheel.
Typically used on Peugeot HDi engines.

Diesel engine setting and locking tool kit OPEL 1.9 CDTI, 50087

Diesel engine setting/locking kit - Vauxhall 1.9CDTI, Alfa Romeo 1.9 8/16v, 2.4 10/20v jtd belt drive.
ContentsIncludes flywheel holding tool to remove/install crankshaft pulley, crankshaft locking tool and camshaft setting tools.
Suitable for setting and locking Alfa Romeo and fiat 1.9 and 2.4jtd including 16v and 20v variants.
Suitable for setting and locking Alfa Romeo and fiat 1.9 and 2.4jtd including latest 1.9jtd 16v and 2.4jtd 20v engines.
Applications:
Vauxhall/Opel: Astra-H (04-11), Astra-J (10-15), Cascada (13-15), Insignia (08-13), Signum (04-08), Vectra-C (04-08), Zafira-B (05-12), Zafira-C Tourer (11-15)
Saab: 9-3 (04-10), 9-5 (05-10)

Engine Codes:
1.9D CDTi: Z19DT, Z19DTH, Z19DTJ, Z19DTL
1.9D TiD: Z19DT, Z19DTH
1.9D TTiD: Z19DTR
1.9D XTTiD: A19DTR, Z19DTR
2.0D CDTi/ecoFLEX: LBQ/A20DTL, LBR/A20DT, LBS/A20DTH, LBX/A20DTJ, LBY/A20DTR, LCD/A20DTC
2.0D TiD: LBS/A20DTH
2.0D TTiD: LBY/A20DTR
Engine Codes:
1.6D JTD/M - 198A2.000, 198A3.000, 198A6.000, 350A2.000, 350A3.000, 940A3.000, 955A3.000, 955A4.000,
1.9D JTD/M 8v - 323.02, 371.01, 182B4.000, 182B9.000, 186A6.000, 186A8.000, 186A9.000, 188A2.000, 188A7.000, 188B2.000, 192A1.000, 192A3.000, 192A8.000, 192A9.000, 192B4.000, 192B5.000, 199A5.000, 223A7.000, 223B1.000, 937A2.000, 937A3.000, 939A1.000, 939A7.000, D19AA.
1.9D JTD/M 16v - 192A5.000, 192B1.000, 844A1.000, 937A4.000, 937A5.000, 937A6.000, 939A2.000, 939A8.000.
2.0D JTD/M - 844A2.000, 940A4.000, 940A5.000.
2.4JTD 10v - 325.01, 342.02, 362.02, 185A6.000, 838A8.000, 839A5.000, 839A6.000, 841C.000.
2.4JTD 20v - 841G.000, 841H.000, 841M.000, 939A3.000, 939A9.000.

Made in China

63 pcs Fiat/ Alfa/ Lancia engine timing tool kit
Description:
This is the ultimate master Engine Timing Tool Kit for Alfa Fiat Lancia.
Comprehensive engine timing tool set for Italian cars.

Contents:
Includes all tools required for camshaft alignment, tensioning and crankshaft alignment to cover a wide range of petrol and diesel engines packed in blow moulded case with bespoke foam insert with perfect indents for every tool in the collection.
Suitable For:
Contains important tools for adjustment: flywheel, crankshaft, camshaft, fuel injection pump shaft, belt pulley, tensioning of the timing belt, complete classification chart included fits varoius engines.
- Alfa Romeo vehicle with 1.4;1.6 1.8, 2.0 and 3.0L 4 cylinders; 6-cylinder engine Alfa Romeo 145, 146, 147, 155, 156, 164, 166, GTA, GTV and Spider GT
- Fiat, Lancia vehicle with 1.2, 1.4, 1.6, 1.8 And 2.0L 4; 5-cylinder engine Fiat Panda, Punto, Palio, Siena, Bravo, Brava, Stilo, Marea, Multipla, Barchetta, Lancia Dedra, Delta, Kappa and Lydra.

Made in: China

Flexible magne pick-up tool, 798-71005

Flexible shank diameter 5.0 mm
L - 400 mm
With plastic PP grip
Magnetic capacity: 0.600 kg (1.3 Lbs)
Overal lenght: 510 mm ( 20")

Made in Taiwan

Diesel Engine Timing Crank Locking Tools-VW-AUDI, 50365

Diesel Engine Timing Crank Locking Tools-VW-AUDI, 50365
VW - Lupo | Fox | Polo | Golf | Golf Plus | Bora | Jetta | Beetle |
Scirocco |Passat | Sharan | Touran | Tiguan | Caddy | Transporter / 98-11
Audi - A2 | A3 | A4 | A5 | A6 | Q5 / 98-11
Ford - Galaxy / 00-06
Seat - Ibiza | Altea | Leon | Alhambra | Toledo | Arosa | Cordoba / 99-11
Skoda - Fabia | Roomster | Octavia | Superb / 00-11
Diesel Engines - 1.2 |1.4 |1.9 | 2.0 TDI PD V6
1.6 | 2.0 TDi Common Rail ...