INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
3/4" Dr. 36mm 12-Point Crowfoot Spanner Wrench, 51353
3/4" Dr. 36mm 12-Point Crowfoot Spanner Wrench, 51353
Premium 36mm Crowfoot wrench with a 12-point (bi-hex) profile and 3/4" square drive. Specifically designed for working with plumbing and pipe connections in restricted spaces.
Made in China
Opel / Vauxhall 1.0, 1.4, 1.5 Petrol - Engine Timing Tool Set, 51297
Opel / Vauxhall 1.0, 1.4, 1.5 Petrol - Engine Timing Tool Set, 51297
Comprehensive timing kit for Opel / Vauxhall 1.0, 1.4, and 1.5 Turbo and Naturally Aspirated engines.
Fits Astra-K, Corsa-E, and Insignia-B.
Made in China
Fork type ball joint separator 28 mm, 50434-3
Fork type ball joint separator 28 mm, 50434-3
28 mm ball joint fork – quickly and safely separates ball joints in cars and machinery.
Used to remove tie rod ends, Pitman arm, and ball joint.
Made in China
1/2" Drive Torque Wrench 60 - 330Nm, T0001
1/2" Drive Torque Wrench 60 - 330Nm, T0001
Torque range: 60 - 330Nm (44.3 - 243.5lbf-ft).
Scale: 1.5Nm / 1.1lbf-ft.
Accuracy: ±3%.
Reversible ratchet mechanism with 72 teeth.
Aluminium knurled handle for comfort and control.
Length: 575mm.
Made in China
Mini 2 Way Pull Clamp, 51163
Mini 2 Way Pull Clamp, 51163
Bolt size M12×70 mm
Claw width: 38 mm
Overal length: 170 mm
Single way pulling max: 2 t
Side way pulling max: 1 t
Weight: 1.100 kgs
Made in China
VAG - 3 pin brake piston wind back tool, 50161
The VAG 3-Pin Brake Piston Wind Back Tool 50161 is an indispensable tool for servicing rear brake calipers on VAG models with an electronic park brake. After retracting the electronic park brake mechanism (software controlled), use this adapter with a wind back tool to reset caliper pistons for new pad installation.
Key Features:
- Essential for VAG models with electronic park brakes.
- 3/8"Dr. and two pin drive option for flexibility.
- Compatible with Renault Megane, Scenic, and Volvo models.
- Outside diameter: 39mm.
2-Jaw Gear puller 80х100, 9481044
2-Jaw Gear puller 80х100, 9481044
Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 100 mm
Axis width: 80 mm
Made in Taiwan
Magnetic tray Ø 100 mm, 50934
Magnetic tray Ø 100 mm, 50934
Size: Ø 100 mm
Made in China
Hose clamp pliers, 50738
Hose clamp pliers, 50738
Features: To remove and install clamps for hose connections in hard-to-reach areas.
With ratchet locking mechanism.
Comfortable handle with ergonomic grip.
13" Internal snap ring pliers, 9420656
13" Internal snap ring pliers, 9420656
Internal
Overal lenght: 320mm
Tip size: Ø3mm
Made in China
1/2" Dr. 32mm 12-Point Crowfoot Spanner Wrench, 51352
1/2" Dr. 32mm 12-Point Crowfoot Spanner Wrench, 51352
Premium 32mm Crowfoot wrench with a 12-point (bi-hex) profile and 1/2" square drive. Specifically designed for working with plumbing and pipe connections in restricted spaces.
Made in China
Jeep 3.0 V6 Diesel - Engine Timing Tool Set, 51097
Jeep 3.0 V6 Diesel - Engine Timing Tool Set, 51097
Professional engine timing kit for Jeep 3.0 V6 CRD / Multijet diesel engines.
Compatible with Grand Cherokee, Chrysler 300C, and Lancia Thema.
Made in China
Hydraulic Extractor and Installer Set, 51334
The Hydraulic Extractor and Installer Set 51334 simplifies the removal and installation of bearings and seals from Ø18 to Ø60 mm. Its hydraulic cylinder connects to a hand or foot pump. This set includes 22 short sleeves (40mm) and 22 long sleeves (110mm) with windows to prevent over-installation. Also included are 4 spindles for common center hole sizes and an 18-ton hydraulic cylinder.
- Wide Application: Suitable for bearings and seals from Ø18 to Ø60 mm.
- Hydraulic Power: Simplifies removal and installation tasks.
- Comprehensive Set: Includes short and long sleeves, spindles, and a hydraulic cylinder.
61 Pcs 3/8" Drive Socket Set , 10061
Equip yourself with the comprehensive 61-Piece 3/8" Drive Socket Set, engineered for durability and versatility. Crafted from high-quality chrome vanadium steel, this set ensures long-lasting performance and reliability for all your projects.
This extensive set includes:
- 18 Standard Sockets: (6-24mm)
- 10 Deep Sockets: (8-19mm)
- 25 Bit Sockets: (Torx, Phillips, Pozidriv, Slotted, Hexagon)
- 72-Tooth Ratchet Handle
Enhance your toolkit with this essential socket set, perfect for both professional mechanics and DIY enthusiasts. Get yours today and experience the convenience and quality of a complete socket solution!
21 Pcs 1/4" Drive Torque Wrench Set 1 - 25Nm, 51278
21 Pcs 1/4" Drive Torque Wrench Set 1 - 25Nm, 51278
Ideal for precise screws and nuts installation.
Sockets material: Cr-V steel
Bits material: S2 steel
Torque range: 1 - 25Nm (0.7 - 18.5lbf-ft).
Scale: 0.2Nm / 0.15lbf-ft.
Accuracy: ±3%.
Drive Square Size: 1/4"
Contains:
Torque Wrench 1 - 25Nm, 72 teeth
Universal Joint
Extension Bar 100mm
Adapter 1/4"F x 3/8"M
17x Bit Sockets1/4”Dr:
Phillips: PH1, PH2, PH3
Hex (37mm): H2, H2.5, H3, H4, H5, H6, H8, H10
Hex (62mm): H5
Torx (37mm Length): T10, T15, T20, T25, T30
Made in China
