INSTRUMENTS

 Timing Tool set for VAG 1.6 and 2.0 TDI
Description:
A nine piece engine locking tool kit for the 5th generation VAG "blue motion" engine fitted with a common rail diesel system.
This kit has been designed to fit the newest Common Rail diesel engines which are significantly different from the older PD engines.
These CR engines combine belt and gear drives by using a toothed belt to transfer the drive from the crankshaft to one of the cam shafts then using gears to transfer the drive from one cam to the other.
For 5th Generation Common Rail diesels (Blue Motion). Includes camshaft pulley puller

Applications:
Audi
- A1 (2010-2015), A1 Sportback (2010-2015)
- A3 (2008-2013), A3 Cabrio (2008-2013), A3 Sportback (2008-2013)
- A4 Quattro (2007-2015), A4 AllRoad (2009-2015)
- A5 Coupe (2008-2015), A5 Cabriolet (2008-2015), A5 Sportback (2008-2015)
- A6 (2008-2014)
- TT (2008-2014)
- Q3 (2011-2015)
- Q5 (2008-2016)
Seat
- Alhambra (2010-2015)
- Altea (2009-2015), Altea XL (2009-2015)
- Exeo (2009-2013)
- Ibiza (2009-2015)
- Leon (2009-2013)
- Toledo (2012-2019)
Skoda
- Fabia II (2010-2015)
- Octavia II (2008-2013)
- Praktik (2010-2015)
- Rapid (2012-2015), Rapid Spaceback (2012-2015)
- Roomster (2010-2015)
- Superb II (2008-2015)
- Yeti (2009-2017), Yeti Outdoor (2009-2017)
Volkswagen
- Amarok (2010-2016)
- Beetle (2011-2015)
- Caddy (2010-2015), Caddy Maxi (2010-2015)
- CC (2012-2015)
- Crafter (2011-2017)
- Eos (2008-2015)
- Golf Plus (2009-2014)
- Golf V Estate (2007-2009)
- Golf VI (2008-2013), Golf VI Cabrio (2011-2015)
- Jetta (2008-2011), Jetta (2011-2016)
- Passat (2009-2011), Passat CC (2008-2012), Passat (2011-2015), Passat AllTrack (2011-2015)
- Polo (2009-2014)
- Scirocco (2008-2014)
- Sharan (2010-2015)
- Tiguan (2007-2016)
- Touran (2010-2015)
- Transporter T5 (2009-2015), Transporter T6 (2016–present)
Engine codes:
1.2: CFWA
1.6: CAYA, CAYB, CAYC
2.0: CAAA, CAAB, CAAC, CAGA, CAGB, CAGC, CAHA, CAHB, CBAA, CBAB, CBAC, CBBA, CBBB, CBDA, CBDB, CBDC, CCHA, CEGA, CFFA, CFFB, CFFD, CFFE, CFHC, CFHF, CFGC, CFJA, CGLA, CGLB, CGLC, CJAA, CJCA, CJCB
OEM#: T10050, T10100, T10051, T10052, T10255, T10060A / T40098, T10264, T10265, T20102 / 3359.

Made in China

Engine Timing Tool set for VAG 2.7 and 3.0 TDI, 50399
Description:
For locking the camshaft, crankshaft and fixing the chain tensioner Required for timing chain replacement or engine repair.
Contents:
   - camshaft locking pin to be used as OEM T40062
   - camshaft tool to be used as OEM  T40041
   - rotating adapter for crankshaft to be used as OEM T40049
   - locking pin for injection pump to be used as OEM 3359
   - rotating adapter for crankshaft to be used as OEM T40058
   - camshaft locking tool 2pcs to be used as OEM T40060
   - crankshaft locking pinto be used as OEM 3242
   - locking pin for chain tensioner 2pcs
Application: Suitable for Audi A4, A5, A6, AB, Q5, Q7 and VW Touareg, Phaeton with engine codes: ASB, BKN, BKS, BMK, BMZ, BNG, BPP, BSG, BUG, BUN, CAMA, CAMB, CANA, CANB, CANC, CAND, CAPA, CARA, CARB, CASA, CASB, CASC, CATA, CCMA, CCWA, CCWB, CDYA, CDYB, CDYC, CEXA, CGKA, CGKB ...

Engine Timing Tool-VW 1.2L

Features: Petrol Engine Setting/Locking Kit - VAG 1.2 3Cyl (6v/12v) - Chain Drive Camshaft and crankshaft timing tools for VAG single camshaft (6v-AWY, BMD) and twin camshaft (12v-AZQ, BME) 1.2 petrol engines in VW Eos, Fox, Polo, Seat Ibiza and Cordoba and Skoda Fabia models.

Applicable: VW GROUP 1.2 SINGLE (6V) AND TWIN CAMSHAFT (12V) 3CYLINDER PETROL ENGINES (02-) IN SEAT, LBIZA / CORDOBA, SKODA, FABIA, VW, POLO.

Set includes:
- camshaft locking pin 1 pc (ОЕМ No. T10121)
- crankshat loing pin 1 pc (ОЕМ No. T10120)
- canshaft locking clamps 2 pc (ОЕМ No. T10123)
Engine code:

• 6v - AWY, BBM, BMD, CHFA, CHFB,
• 12v - AZQ, BME, BXV, BZG, CEVA, CGPA, CGPB, CJLA

Made in China

Petrol Engine Setting/Locking Kit - BMW N42/N46/N46T 1.6, 1.8, 2.0 chain drive
This timing locking tool set is ideal for timing and adjustment of the twin camshaft on petrol engines. It is also ideal for removing, installing and aligning of vanos unit.
This tool set is crafted by hardened and tempered carbon steel, ensuring its maximum durability for years of use.
Delivery Includes: (BMW OEM-number below for your reference)
1 pc Fixing bridge cam = OEM 119291
1 pc Fixing angle camshafts = OEM 119292
1 pc Fixing screw = as OEM 119293
1 pc Camshaft rotation key = as OEM 19270
1 pc Fixing strip encoder wheels = same as OEM 119350
1 pc Clamping tool = like OEM 119340
1 pc Crankshaft Staking shaft (straight) = as OEM 112300
1 pc Crankshaft Stakeout shaft (angled) = as OEM 119190
Fits the Following BMW - models :
E46 : 316i B18 / B18A; E87 : 118i / 120i; E60 : 520i; E83 X3 2.0; E85 : Z4 2.0; E90/E91 : 318i / 318ti / 320i
Fits the following engine code :N42 , N46 , N46T , B18/-A , B20/-A/-B
Made in China

Camshaft alignment tool - BMW M52TU/M54/M56
This tool set contains a comprehensive set of tools to perform camshaft timing on BMW M52TU, M54, M56 engines.
The kit includes the following:
- For BMW Double VANOS Camshaft Alignment Tool M52TU M54 M56 6-cylinder engines utilized from 1998 onwards
Include:
1) (ref.#116150) Alignment Jig: Adjusting plate for setting valve timing on engine with double Vanos.
2) (ref.#116180) Sprocket Assembly Jig: Use for preassembling secondary chain sprockets with chain on camshafts.
3) (ref.#114220) Rigid Chain Tensioner: Use to tension primary chain.
4) (ref.#113292) Chain Tensioner Lock Pin: Locks chain tensioner during timing.
5) (ref.#113450) VANOS Compressed Air Connection: Use to pressurize the single and double Vanos unit when checking or removing and replacing.
Applicable: for BMW 6 cylinder engine: M52TU (1998-2000), M54 (2001-2004), & M56 (2003 to present).
- For BMW 4 & 6 Cylinder Camshaft Alignment / Timing Tools. Include:
6) (ref.#113240) Camshaft Locking Fixture: Aligns and holds the camshaft in position when assembling cylinder head and replacing timing chain.
Engines: M42, M44, M50, M52, M52TU, M54, M56, S50US, S52US.
7) (ref.#112300)Top Dead Center Pin: Use to lock the flywheel at Top Dead Center when removing or replacing the camshafts or VANOS assemblies.
Engines: M42, M43, M44, M50, M52, M52TU, M54, M56, M60, M62, M70, M73, S50B30, S50B32, S54, S62.
8) (ref.#115490)VANOS Turning Wrench: Use to adjust VANOS position on single VANOS engines when removing or installing.
Engines: M50, M52, S50US, S52US.

Made in: China

7-Drawer Roller Tool Cabinet & 224 pcs tools

Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake

Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13  мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm  Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent  90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g

Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm

Made in China

M12x1.75, 25pcs Helicoil thread inserts, 50727H 

Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M12x1.5
Package of 25 pcs.

Two way viscous fan spanner, 9G0710B

50 pcs Helicoil thread inserts M10x1.5

Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M10x1.5
Package of 50 pcs.

AUDI Crank locking pin M12x1.5, 9G1302

This pin is used to lock the crankshaft at the TDC position while replacing the timing belt.
Applicable: AUDI 3.0L V6 5 valve.
Size: M12*1.5

Origin: Force, Taiwan

M8x1.25, 100 pcs Helicoil thread inserts, 50727C

Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M8x1.25
Package of 100 pcs.

Bearing separator 15-75 mm, CRMO3

M6x1.0, 100 pcs Helicoil thread inserts, 50727B

Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M6x1.0
Package of 100 pcs.

M5x0.8, 100 pcs Helicoil thread inserts, 50727A

Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M5x0.8
Package of 100 pcs.