INSTRUMENTS

75mm 15-pt. Oil filter wrench, 6317515

Applicable: GM, CHRYSLER

Origin: Force, Taiwan

Flexible hose clamp pliers, 058-6241A

These pliers are cable wires, meaning they’re capable of reaching into narrow areas.
In all, the cable on these pliers measures in 24 inches.
This gives you plenty of reach regardless of what care you’re working on.
Equipped with a locking mechanism, these pliers can stay attached to hose clamps without your assistance.

Made in Taiwan.

3/4"Dr. 12-pt. Flank socket 65 mm, 50469

Specially for the hub nuts on transit vans.

Size: 65 mm

Material: Cr-V

Made in China

Adjistable fuel tank lid remover, 50909

Working with combination wrench 16 mm
Working Range 100 - 170 mm

Made in China

1/2"Dr Injection Line socket

Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for BMW Diesel engines and OPEL 2.5 TD engines.
Material: Cr-V
Size: 14; 17; 19 mm ...

Effortlessly remove stuck injectors with our Diesel Injector Puller Set for Citroen and Peugeot 2.0/2.2HDi 16V engines. Avoid cylinder head removal!

• Perfect for engine codes: DW10ATED4, DW10ATED/L4, DW10JATED4, DW12ATED4/L4.
• Includes a massive bridge to protect the engine block.
• Comes with injector sockets, screws, nut puller, and more for comprehensive use.

BMW Common rail injector set, 50630

Special tool pulling out stuck injectors
with BMW Diesel Engine Code with M47TU / M 47T2 / M57 / M57TU / M 57T2
The support on the cylinder head enables high pull-off
disassembly of the cylinder head is therefore not necessary
The particular form of puller allows safe and precise extraction, especially in very tight injectors / injectors.
Contents
- 2 support feet 115 mm
- 2 support feet 140 mm
- Supporting bridge with ball bearing
- Spindle M16 with unilateral M17 thread for mounting in the injector
- 29mm socket wrench for removing the electrical unit
- Allen key for removing the injector needle
For the following BMW - types
In contrast to solutions with impact hammer, the injectors are removed with this tool by even train and in the optimum position for installation position.
E38: 730 d
E87: 118 d / 120 d
E46: 318 d / 320 d / 330 d
E39: 520 d / 525 d / 530 d
E60/E61: 520 d / 525 d / 525 xd / 530 d / 530 xd / 535 d
E63/E64: 635 d ( 04-10 )
E38/E65/E66: 730 d
E83: X3 2.0 d / 3.0 d
E53/E70: X5 3.0 d
E90/E91: 316 d / 320 d
E90/E91/E92/E93: 325 d ( 06-10 ), 330 d / xd ( 98-08 ), 335 d
This also applies to same engine in a Land Rover - types such as
Range Rover: 2.5 DT   Year 1994 - 2002
Range Rover: 3.0 TD6   2002 - 2006
Freelander: 2.0 TD4   2002 - 2006...

2 pcs Vacuum cup valve grinder, 50104
For hand use, grinding flat head, unslotted valves.
Suitable for small and large vehicles.
Hardwood handles for easy hand lapping of engine valves.
• Synthetic rubber vacuum cups are resistant to oil, grease, gasoline and are replaceable.
• 1-1/8” & 1-3/8” dia. cups.
• 5/8” & 13/16” dia. cups.

Chain Breaker and reverting tool, 50095
Hardened Steel Body Construction. Designed to rivet chain links to form an endless chain.
Versatile enough to be used on cam chain to drive chains or as a chain breaker by pushing the pin out.
Breaks and Rivets/ Stakes all over head cam chains on all model Japanese and European OHV Cam
This chain breaker kit includes: 3 pin sizes to fit a variety of chains. This tool will break and rivet 420- 630 rear drive chains. It comes with 2mm, 3mm, 4mm, and replacement tips for different size Cam Chains
Contents:
1 x Chain Press;
1 x Handle;
1 x Long Lever;
3 x Anvils;
1 x Press Plate;
3 x Chain Pins;
1 x Rivet Pin;
1 x Spring

Made in China

Spark plug terminal pliers 9G0101

Features:

• Safely remove spark plug cables and prevent cable damage.
• Pliers handles and jaws are coated with a heavy-duy plastic for a sure grip.

Produced by Force, Taiwan

46 mm Viscous fan hub spanner, AI050108

Applicable: Engines OPEL 1.6 (up to 87), 1.7D, 1.8, 2.0

Size: 46 mm

Made in Jonnesway, Taiwan

Oil filter pliers, 639300

Capacity: 85 - 115 mm

Produced by Pard, Taiwan

Camshaft setting bar & TDC timing pins FORD/Mazda, 9G1211

• Camshaft setting and locking plate.
• Updated set now covers Zetec engines found in FOCUS, MONDEO and COUGAR from 98 on. Also covers FORD 1.6; 1.8 and twin cam 16V petrol engines
• Crankshaft TDC location for FORD 1.25 and 1.4 engines plus the puma 1.7 engine.
• TDC pin also suitable for MAZDA 121 1.25LTR petrol engines.
• Supplied with warning tags.

Ensure your vehicle's optimal performance with our 4-in-1 Refractometer! This hand-held optical device accurately measures antifreeze, screenwash, battery fluid, and AdBlue urea concentration.

• Automatic Temperature Compensation (ATC) for increased accuracy.
• Easy to use and calibrate for quick measurements.
• Soft rubber eyepiece and non-slip grip for comfortable handling.