INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
5 pcs 1/2"Dr. Twist socket set, 50927
5 pcs 1/2"Dr. Twist socket set
Socket size: 17 mm, 19 mm, 21 mm, 22 mm and 12 mm and drift punch.
THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!
Made in China
Water pump sprocket holder, 50864
Water pump sprocket holder, 50864
Application:
For GM Ecotec; Holds the Timing Chain and Gear in Place While Removing or Installing Water Pump on Ecotec Engines.
Securely holds water pump sprocket preventing loss of timing or damage to the engine.
Special half-moon design allows easier access to water pump gear bolts.
Uses access cover bolts to hold the tool in place.
Made in China
BMW - 3 pcs Rim Lock socket set, 50440
BMW - 3 pcs Rim Lock socket set, 50440
1/2" Dr. special socket setfor BMW rim locks use
Sizes:
17 teeth х 14.5 mm
10 teeth х 16.0 mm
21 teeth х 16.5 mm
Made in China
17 pcs proffesional slide hammer/puller set, 50139A
17 pcs proffesional slide hammer/puller set, 50139A
Features:
Designed to use with other 5/8" - 18 thread slide hammer attachments.
Internal and External jaws provide a variety of combinations to pull bearings, gears and seals
Pulls flange-type rear axle and most front wheel drive hubs.
Set includes grip wrench adapter and dent puller
Two and three way cross blocks and cone provide perfect jaw configuration for many jobs
Drop forged steel puller and fully hardened shaft and accessories.
Converts in to 2 or 3 jaw internal / external puller.
Camshaft lock for AUDI V6, AL010022
1/2"Dr. Magnetic spark plug socket, C807416M
1/2"Dr. Magnetic spark plug socket, C807416M
Material: CR-V
L: 70 mm
Made in Pard, Taiwan
1/2"Dr. Magnetic spark plug socket, 807414M
1/2"Dr. Magnetic spark plug socket, 807414M
Material: CR-V
L: 70 mm
Made in Force, Taiwan
1/2" Dr. Ratchet handle, G0001
1/2" Dr. Ratchet handle, G0001
72 teeth
Made of CR-V
Made in China
Universal oxygen sensor socket, 9G1401
Universal oxygen sensor socket, 9G1401
Work on most vehicle oxygen sensors.
Oil filter wrench, EN6317414
Oil filter wrench, 6317414
Application: BMW, AUDI, VW, OPEL, AUSTIN
Made in Taiwan,
1/2"Dr. Vacuum switch socket 22 mm, 44315022
1/2"Dr. Vacuum switch socket 22 mm, 44315022
Lenght: 150 mm
Applicable: BMW, Ford, Mercedes Benz C и E класа (602, 605, 606 engines), Opel, Rover, VAG,Volvo, VW/AUDI/SKODA, SEAT.
Made in Taiwan, Force
131 pcs Thread repair kit, 50218
131 pcs Thread repair kit
This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bits, thread taps, insert installations (heli-coil) and lug breaking tools.
The set comes with extra long inserts that can be cut down to the size you need using a pair of side cutter, so you always get the correct size insert you need.
Made by professionals for professionals.
Specifications:
• Thread repair kit for M5 - M12
• Creates a stronger internal thread in soft metals.
• Ideal for repairing damaged or stripped internal threads.
• Protects tapped threads against wear and damage.
• Includes drill bits, thread taps, insert installations and lug breaking tools.
• Supplied with three different lengths of thread insert.
• Thread insert (helicoil) lengths: M5 x 0.80 - 6.7mm L, M6 x 1.0 - 8.00mm L, M8 x 1.25 - 10.8mm L M10 x 1.5 - 13.5mm L, M12 x 1.75 - 16.3mm L
• Drill bits, thread taps and lug breaking tools match the sizes above
