INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Car Body Alignment Claw (2-direction), 51161
Car Body Alignment Claw (2-direction), 51161
Bolt size M16×70 mm
Claw width: 43 mm
Overal length: 205 mm
Single way pulling max 3 t
Side way pulling max. 1 t
Weight: 2 kgs
Made in China
Tire thread and brake lining gauge, 9B1802
Tire thread and brake lining gauge, 9B1802
Used to measure the amount of lining remaining on riveted and bonded drum shoes and disc brake pads.
Measures tire thread depth up to 9/16" in graduations of 1/64".
Checks pads without having to remove caliper completely.
Made in Taiwan
Vacuum and fuel hose pliers, 50737
Vacuum and fuel hose pliers, 50737
For easy removal hose fuel and vacuum system
Working part: 35 mm
Hose dimensions: 4 - 12.5 mm (5/32 "- 1/2")
1/2" Dr. 27mm 12-Point Crowfoot Spanner Wrench, 51351
1/2" Dr. 27mm 12-Point Crowfoot Spanner Wrench, 51351
Premium 27mm Crowfoot wrench with a 12-point (bi-hex) profile and 1/2" square drive. Specifically designed for working with plumbing and pipe connections in restricted spaces.
Made in China
BMW Final Drive Input Shaft Socket 37 Splines, 51440
BMW Final Drive Input Shaft Socket 37 Splines, 51440
Specialized socket for holding the rear axle final drive input shaft when loosening/tightening the flange nut. Fits BMW RWD/4WD.
Made in China
Suspension Split Hub Knuckle Spreader, 51305
Suspension Split Hub Knuckle Spreader, 51305
Features:
A compact hub clamp spreader tool designed to allow the suspension split hub to be held open to make the removal and fitting of the suspension strut easier.
Suitable for use on various BMW, Citroen, Ford, Peugeot and VW Group models, the double ended design allows it to be used on larger upper split hubs together with lower ball joint split hubs without the risk of damage.
For removal and fitting of suspension struts whilst leaving the hub on the vehicle.
Double ended action allows use on both larger upper split hubs and lower ball joint split joints.
Applications include: Audi, BMW, Citroën, Ford, Peugeot and Volkswagen.
Use with 10mm hand tools only, MAX torque 13Nm.
Maximum opening 14mm.
Keep thread clean and lightly lubricated.
THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!
Made in China
Pull Camp Car Body Alignment Tool (2-way), 51160
Pull Camp Car Body Alignment Tool (2-way), 51160
Bolt size M14×120mm
Claw width: 35mm
Overal length: 230mm.
One way pulling max 3 t
Side way pulling max. 1 t
Weight: 2 kgs
Made in China
4 in 1 Circlip pliers, 50729
4 in 1 Circlip pliers, 50729
Contents:
Internal, straight, Ø 1.4 mm
Internal, 90 ° bent tip Ø 1.4 mm
External, straight, Ø 1.2 mm
External, 45 ° bent tip Ø 1.4 mm
Overal Lenght: 155 mm
Made in China
Clic-R Collar Hose pliers, 50678
Clic-R Collar Hose pliers, 50678
Professional tool.
For releasing and refitting clips type Clic-R
Made of chrome-vanadium steel and then tempered and hardened for greater strength.
Comfortable plastic handles.
Overall length: 175 mm
Application: for most models of European cars VW / Audi, BMW, Mercedes
3/8” Dr. 5 – 25 Nm Adjustable torque wrench 418-T-60-38
3/8” Dr. Adjustable torque wrench 5 – 25 Nm, 418-T-60-38
The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/8" Dr.
Capacity: 5 – 25 Nm (0.5 – 2.5 Kgs)
Made in Taiwan
1/2" Dr. 24mm 12-Point Crowfoot Spanner Wrench, 51350
1/2" Dr. 24mm 12-Point Crowfoot Spanner Wrench, 51350
Premium 24mm Crowfoot wrench with a 12-point (bi-hex) profile and 1/2" square drive. Specifically designed for working with plumbing and pipe connections in restricted spaces.
Made in China
BMW Final Drive Input Shaft Socket 27 Splines, 51439
BMW Final Drive Input Shaft Socket 27 Splines, 51439
Heavy-duty socket for holding the rear axle input shaft on BMW M-series models during flange nut servicing.
Made in China
Hydraulic Drive Shaft Remover/Press Set, 50127
Hydraulic Drive Shaft Remover/Press Set, 50127
Used to press drive shafts out of wheel hubs.
For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 98-125 mm diameter circle.
Especially for glued and rusty drive shafts.
Has a 10 ton capacity.
Applicable: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.
Made in China
