INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Portable Work Stand, 50173
Portable Work Stand, 50173
X-type
Facilitates the work at body parts such as: doors, fenders, hoods and bumpers.
Adjustable chain to accommodate difficult work heights.
The arms lined with soft foam prevents the movement of the element.
High quality, robust performance.
Powder coated.
Features:
Length: 1040mm
Width (adjustable): 430-820mm
Height (adjustable): 660-960mm
Pipe diameter: 28mm
Tube thickness: 1.2mm
Max. capacity: 220kg
Weight: 6 kg
Made in China
Brake & Fuel Pipe Fluid Lock Set, 50708
Brake & Fuel Pipe Fluid Lock Set, 50708
A tool kit for sealing metal brake pipes.
Suitable for clamping and sealing metal flared pipes on brakingsystems, cooling system bypass fuel pipes, AC pipes etc.
3 pcs anodised Aluminium bodies with composite screw.
Sizes: 4.2mm to 10mm.
Made in China
Internal snap ring pliers (Long arm), 50760
Internal snap ring pliers (Long arm), 50760
- 90° internal bent nose circlip pliers.
- For removing and installing the snap rings on hydraulic master cylinders on motorcycles.
- Spring loaded action for ease of use.
- Moulded handles for easy comfortable use.
3/4" Dr. Metal socket holder, 659-643210А
3/4" Dr. Metal socket holder, 659-643210А
L: 432 mm - 10 Pcs
Material: Steel
1/2" 42-210 Nm Torque Wrench 418-T-150
Torque Wrench 1/2" 42-210 Nm 418-T-150
The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 1/2" Dr.
Capacity: 42-210 Nm (4.2– 21 Kgs)
Made in Taiwan
80-120 mm Heavy Duty 3-Jaw Oil Filter Wrench, 51423
80-120 mm Heavy Duty 3-Jaw Oil Filter Wrench, 51423
Professional heavy-duty 3-jaw wrench designed for easy removal and installation of oil filters ranging from 80mm to 120mm.
Made in China
4Pcs 1/2" Drive Extra Long Spline Bit Socket Set, 50467
4Pcs 1/2" Drive Extra Long Spline Bit Socket Set, 50467
Fearutes: Extra long spline bit sockets for loosening and tightening drive shaft screws from the outside.
Applicable: for VW, Audi, Seat, Skoda, including VW Transporter T4 and Touareg.
Material:
Hardened and tempered Chrome Vanadium steel sockets.
S2 steel spline bits.
Sizes:
1 pc M8 x 800mm
1 pc M10 x 800mm
1 pc M12 x 800mm
1 pc M14 x 800mm
Made in China
BPW Rear Hub Cap Socket 111mm, 51017
BPW Rear Hub Cap Socket 111mm, 51017
Features: Oval shape socket with two flats on the side to suit BPW rear axle hub retaining cap nuts found on later model Japanese commercial trucks, tractors and automotive equipment.
Applications: BPW 12 tons.
Use with 41mm spanner or socket.
Size: 111mm (Oval) across the flats.
Made in China
AUDI Q7, S4 1/2" Dr.7 Teeth Brake Caliper Socket 1/2"D 14mm 2006-0014
AUDI Q7, S4 1/2" Dr.7 Teeth Brake Caliper Socket 1/2"D 14mm 2006-0014
1/2" dr.7 teeth, 14mm socket QKX3 x 50mmL
Material: CR-MO
For removal and replacement of the retaining
screws on brake caliper on Q7 and other models
Made in Taiwan
3/8" Dr. Metal socket holder, 659-343216
3/8" Dr. Metal socket holder, 659-343216
1/2" 70-350 Nm Torque Wrench 418-T-250
Torque Wrench 1/2" 70-350 Nm 418-T-250
The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 1/2" Dr.
Capacity: 70-350 Nm
Made in Taiwan
Snap ring pliers (external 90° bent tip 1.8 mm), 60907BO
Snap ring pliers (external 90° bent tip 1.8 mm), 60907BO
Capacity: 19 - 60 mm
Made in Taiwan
Engine Timing Tool Set - VAG 1.5 TSI (EA211 EVO), 51280
Engine Timing Tool Set - VAG 1.5 TSI (EA211 EVO), 51280
The professional tool kit is precisely designed to align, set, and check the camshaft timing on modern VAG 4-cylinder 1.5 TSI (EA211 EVO) petrol engines.
The key advantage of this set is that it allows for accurate timing without the need for computer-based diagnostic tools.
Made in China
17 Pcs Go-Through Socket Set, 51101
17 Pcs Go-Through Socket Set, 51101
Suitable for Hex, Square, 12-Point, Spline, Torx nuts and bolts.
Set contains:
13 pcs Go-Through Socket: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 mm
1 pcs 19mm Go-Through Ratchet Handle
1 pcs 19mm (F) x 3/8" (M) Quick-Release Adapter
1 pcs 19mm (F) x 1/2" (M) Quick-Release Adapter
1 pcs 75mm Go-Through Extension Bar
Material: Cr-V
Chrome plated
Made in China
Scania Rear Axle Nut Socket 100mm, 51016
Scania Rear Axle Nut Socket 100mm, 51016
Features:
Used to remove and install the rear axle nut on Scania trucks.
Size: 3/4" Drive x 100mm (8-point)
Made in China
