INSTRUMENTS

10-32mm 1/2"Dr. 6-pt 15 pcs Flank deep socket set, C4151

Material: Cr-V

Contents: 10; 11; 12; 13; 14; 15; 16; 17; 19; 21; 22; 24; 27; 30; 32 mm

Produced by Pard, Taiwan

3 Jaws Gea

3 Jaws Gear puller 8”, 50742D

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 8”
Capacity: 80 – 203 mm

Made in China

r puller 8”, 50141-8

1/4" Dr. Metal socket holder, 659-243216

L: 432 mm - 16 Pcs

Material: Steel

BMW M52TU/M54/M56 - Crankshaft Pulley Holding Tool, 50296

Features: For BMW 6 Cylinder Engine M52TU / M54 / M56
Tool is designed to hold the crankshaft pulley stationary while loosening or tightening the center screw.
It can safely remove the pulley and won't damage the pulley shock - proof function.

Application: BMW (M52, M54, M56).

Made in China

BMW Drive Shaft and Differential Flange Nut Tool Set, 51019

Features:
For removing and installing of the drive shaft nut allows inserting of the rear differential pinon seal suitable for BMW vehicles with rear and four wheel drive.
Suitable for BMW E70, E90, E91, E92 with N54 B30 engine.
Contents:
Open end spanner 50 mm - OEM # 33 5 040 – For BMW E70, E88, E90, E91, E92
Flange holding tool - OEM# 23 0 020 – For BMW E70, E82, E88, E90, E91, E92, etc.
Multi-point ring spanner 65 mm – OEM# 33 5 050 – For BMW E70, E82, E90, E91, E92, E93
Multi-point socket 34T – OEM# 3 35 060 – For BMW E70, E82, E90, E91, E92, E93
Seal ring drift – OEM# 3 35 080 - For BMW differential: HAG 215 Sp, HAG 220kom, HAG 225kom, HAG type G

OEM#: 33 5 040, 33 5 050, 33 5 060, 33 5 080, 23 0 020

Made in China

21 PCS Master Adaptor Set Ball Joint Service Kit, 50042

With 4 Wheel Drive Adaptors
Brake Anchor Pin Removal and Installation
This tool kit is designed for use on all cars and
Light trucks that have press-fit type ball joints
Without the need to remove the control arm from the vehicle
Contents:
C-Frame and Forcing Screw
Installation Adaptor
Removal Adaptor
Installation Cups
Removal Cups
Receiving Tubes
For servicing universal joints on most cars / vans and light trucks
Description:
Includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles. Comes with blow molded carrying case, making it easier to keep the tools organized and easy to transport.
Features:
Solid carbon-steel construction with anti-rust coating for ultimate endurance through years of heavy use.
Designed to easily remove and replace press-fit upper and lower ball joints with receiver tubes and adapters for most full-size GM, Ford, and Dodge vehicles.
Includes all receiver tubes and removing/installing adapters for press-fit upper and lower ball joint service.
The forged C-frame press makes it easier to remove and replace universal joints when stacking with numerous cups and receivers.
The tool case with pre-sized slots for each component keeps your tools securely organized and extends their service life.

Made in China

10-32mm 1/2"Dr. 12-pt 15 pcs Flank deep socket set, C4151-9

Material: Cr-V

Contents: 10; 11; 12; 13; 14; 15; 16; 17; 19; 21; 22; 24; 27; 30; 32 mm

Produced by Pard, Taiwan

Pneumatic Brake fluid bleeder, 50445

Features:
Closed system for refilling brake fluid and for brake fluid bleeding.
Applicable for most of traditional and ABS braking systems of cars and motorcycles.
The set includes adapters with the following sizes:
- 21-30 mm
- 24-32 mm
- 28-37 mm
- 32-41 mm
Features:
Air Requirement: 6 - 8 Bar (90-120 Psi)
Air consumption: 180 l / min.
Capacity of reilling container: 0.75 l
Air Inlet: 1/4 "

Made in China

3 Jaws Gear puller 10”, 50742E

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 10”

Made in China

Multi-function magnetic tool holder, 372-11050147

Габаритен размер:

Width: 300-500 mm

Height: 120 mm

Deep: 130 mm

Color: blue

Capacity: 15 kgs

Made in Taiwan

Air vacuum dent puller with 3 pads, 178-0169A

Contents:

3 pads: 75 mm, 100 mm, 125 mm

Working pressure: 5 - 12 Bar (70 - 170 Psi)

Made in Taiwan

Spark Plug Thread Repair Kit, 50261

Comprehensive and time saving kit of spark plug thread repair tools.
Especially suitable for the repair of deep -seated plug configurations.
Incorporates taper and plug taps together with integrated ream.
Stepped tap ensures correct alignment of cutter in existing spark plug hole.
Extension tools allow easy access to the bottom of the plug recess.
Includes set of plug inserts.

Made in China

HGV Diesel Injection Nozzle Socket, 50825

Features:
Used to install and remove the diesel injection nozzle on MAN, Mercedes-Benz and Scania commercial vehicles.
Specially designed with window, toothed end and M14x1.5 pulling force screw.
Applicable: Mercedes-Benz CRD, MAN & Scania

Made in China

SCANIA - 80mm 8-pt. Front Hub Nut Socket, TP9T1422
Description:
This eight sided 80mm socket is designed for the removal of front hub nut found on Scania trucks.
Lenght: 104 mm
Innerdiameter: 80 mm
Outerdiameter: 100 mm
Driven by 41mm Hex
Weight: 1800 gr

Made in Taiwan

10-24 mm 1/2"Dr. 6-pt. Flank impact deep socket set, C4112

Material: Cr-Mo

Over: 85 mm

Contents:

10; 11; 12; 13; 14; 15; 17; 19; 21; 22; 24 mm

Produced by Pard, Taiwan