INSTRUMENTS

Professional Dent Removal Tool , RDR-1000

Description: Professional Dent Removal Tool, Paintless Dent Repair Kit
It adopts advanced microcomputer program control technology to provide precise control of the working waveform.
Second-ranking configuration of main components, original imported components, to ensure stable and reliable performance.
High work efficiency and low maintenance cost. Air-cooled heat dissipation, cooling effect and long service life.
Specification:
Item Type: Paintless Dent Repair Tool
Material: Stainless Steel + ABS + Rubber
Model: PDR-1000
Rated Power: 1000W
Working Voltage: 5V
Power Factor: Greater than or equal to 0.95
Efficiency: Greater than or equal to 90%
Heat Dissipation Method: Air-Cooled
Protection Level: IP23

Application: Suitable for quick repair of automotive sheet metal dents.

Made in China

1/2” Dr. E20 Cylinder Head Wrench-Man, 50811

Features: For loosening and fastening cylinder head screws. Removing the injector no longer necessarily.
Ideally suited for commercial vehicles.
Profil: E-Torx.
Drive: Square, 1/2".
Applicable: MAN series F2000 / F90 / F8, MAN buses with D25 and D28 engines.

Made in China

Brake Spring pliers, 210-0980-1

Features: for assemble and disassemble the springs of the brake shoes in a drum brake.
Caused Zero damage to the components.
Handle with a socket end for removing spring from anchor stud.
Handle with a grooved end for installing spring on anchor.
Jaw with an unique sunflower-shaped and swivel design allows the operator to grab the surface of the drum brake shoes firmly, and the other jaw hooks thehooking portion of the return spring. And then holding close two handles to assembly or disassemble the spring of the brake shoes.

Made in Taiwan

4Pcs 1/2" Drive Extra Long Spline Bit Socket Set, 50467

Fearutes: Extra long spline bit sockets for loosening and tightening drive shaft screws from the outside.
Applicable: for VW, Audi, Seat, Skoda, including VW Transporter T4 and Touareg.
Material:
Hardened and tempered Chrome Vanadium steel sockets.
S2 steel spline bits.
Sizes:
1 pc M8 x 800mm
1 pc M10 x 800mm
1 pc M12 x 800mm
1 pc M14 x 800mm

Made in China

Hydraulic Drive Shaft Remover/Press Set, 50127

Used to press drive shafts out of wheel hubs.
For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 98-125 mm diameter circle.
Especially for glued and rusty drive shafts.
Has a 10 ton capacity.

Applicable: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.

Made in China

1/2" Dr. Socket rail, 819409

L- 260 mm

9 pcs

Made in Taiwan, Force

Clic-R & Clip Collar Hose pliers, EN9G0104

Professional tool.

For releasing and refitting clips type Clic-R & Clip

Made of chrome-vanadium steel and then tempered and hardened for greater strength.

Comfortable plastic handles.

Overall length: 175 mm

Application: for most models of European cars VW / Audi, BMW, Mercedes 

Made in Taiwan

3/8” Dr. Adjustable torque wrench 5 – 25 Nm, 418-T-60-38

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/8" Dr.
Capacity: 5 – 25 Nm (0.5 – 2.5 Kgs)
Made in Taiwan

Coil spring compressor 370 mm, 627370

24mm Oil Filter Wrench For DSG Gear Oil Change, 50845
 
Features: For operation of the oil filter housing cover when changing the oil filter insert on the DSG gearbox.
Applicable: VW and VAG group vehicles.
No removal of batteries or battery holders.
VW specification: DSG oil change within the inspection interval.
Drive: Square, 1/2".
Output: Outside 12-point profile.
Wrench size: 24mm.
Length: 199 mm.

Made in China

M9X1.25 Brake Thread Repair Tool Kit, 50400

The repair kit for brake shoe threads is equipped with reinforced drills and ten thread inserts suitable for VAG (Volkswagen, Audi), Opel / Vauxhall, Ford.
Contents:
10pcs Thread inserts
Drill bits
Taps
Tiles (VAG, Opel, Ford)
Hexagon spanner

Made in China

Mini 2 Way Pull Clamp, 51163

Bolt size M12×70 mm
Claw width: 38 mm
Overal length: 170 mm
Single way pulling max: 2 t
Side way pulling max: 1 t
Weight: 1.100 kgs

Made in China

17 Pcs Go-Through Socket Set, 51101

Suitable for Hex, Square, 12-Point, Spline, Torx nuts and bolts.
Set contains:
13 pcs Go-Through Socket: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 mm
1 pcs 19mm Go-Through Ratchet Handle
1 pcs 19mm (F) x 3/8" (M) Quick-Release Adapter
1 pcs 19mm (F) x 1/2" (M) Quick-Release Adapter
1 pcs 75mm Go-Through Extension Bar
Material: Cr-V
Chrome plated

Made in China

BMW - Differential Front Bush Extractor F Series, 50954

Features: This tool is used to extract and install the transversely mounted differential mounting bushing that is located in the rear subframe.
The service work can be performed on-car without the removal of the subframe.
Applicable:
BMW F01 — (2008–present) 7 Series
BMW F02 — (2009–present) 7 Series long wheelbase
BMW F04 — (2011–present) 7 Series ActiveHybrid
BMW F06 — (2011–present) 6 Series Gran Coupe/M6 Gran Coupe
BMW F07 — (2009–present) 5 Series Gran Turismo
BMW F10 — (2011–present) 5 Series Sedan/M5 Sedan
BMW F11 — (2012–present) 5 Series Touring
BMW F12 — (2011–present) 6 Series Coupe/M6 Coupe
BMW F13 — (2011–present) 6 Series Convertible/M6 Convertible
BMW F18 — (2010–present) 5 Series long wheelbase

Models: BMW F01 / F02 / F06 / F07 / F10 / F11 / F13

OEM Bush number: 33316792873

Made in China

3/8" 20-110 Nm Torque Wrench 418-T-80

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/8" Dr.
Capacity: 20-110 Nm (2 – 11 Kgs)

Made in Taiwan