ENGINE TIMING TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
BMW N47/N57 2.0, 3.0 - Chain Drive - Diesel Engine Setting/locking Kit, 50344A
Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A
Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.
Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)
Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0
OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760
Made in China
Telescopic Inspection Mirror, 50238
Telescopic Inspection Mirror, 50238
Extends to a maximum length of 598 mm
Mirror diameter: 50 mm.
Length: min. 282 – max. 598 mm
Made in China
Oil Measuring Jug - 5 L, 50225-5
Oil Measuring Jug - 5 L, 50225-5
This oil measuring jug is resistant to oil, fuel and most acids.
Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages.
Complete with flexible spout.
Material: High-density polyethylene.
Capacity: 5 l
Made in China
Oil Measuring Jug - 3 L, 50225-3
Oil Measuring Jug - 3 L, 50225-3
This oil measuring jug is resistant to oil, fuel and most acids.
Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages.
Complete with flexible spout.
Material: High-density polyethylene.
Capacity: 3 l
Made in China
Oil Measuring Jug - 1 L, 50225-1
Oil Measuring Jug - 1 L, 50225-1
This oil measuring jug is resistant to oil, fuel and most acids.
Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages.
Complete with flexible spout.
Material: High-density polyethylene.
Capacity: 1 l
Made in China
4” Piston ring pliers, 50335A
4” Piston ring pliers, 50335A
Universal design - can be used on most vehicles.
Smooth gripping edge - to prevent damage to the piston rings.
Capacity: 50 - 100 mm
Made in China
BMW/Opel/Vauxhall - Camshaft Gear Alignment Tool, 50876
BMW/Opel/Vauxhall - Camshaft Gear Alignment Tool, 50876
Designed to clamp onto the gear and hold the 2 gear halves in alignment so making the assembly and disassembly easier.
For Vauxhall 1.3 CDTi (B13) diesel camshafts and BMW B37 1.5 Diesel Balance shaft gears.
Applications:
BMW 1.5 Diesel 1 Series 2015<, 2 series 2014<, X1 2015<, BMW Mini One 2014<
Engine codes: B37C15A, B37D15A
Opel / Vauxhall Corsa E, 1.3 Diesel from 2015.
Engine codes: LKU/B13DTE, LKU/B13DTR, LKV/B13DTC
OEM#: 11 5 370 / EN-50509
Made in China
Renault/Nissan/ Vauxhall/ Opel 1.8 & 2.0 16V - Camshaft Locking Tool, 50849
Renault 1.8 & 2.0 16V - Camshaft Locking Tool, 50849
For locking the camshaft sprocket
Applicable:
Renault: Clio II (1999-2006); Clio III/ Sport (2006-2009); Espace/ Grand Espace (1998-2002); Espace/Grand Espace IV (2002-2010); Laguna (2098-2001); Laguna II (2001-2007); Laguna III (2007-2013); Megane (1999-2003); Megane II (2002-2010); Megane III/ Sport (2008-2013); Megane/ Scenic (1999-2000); Scenic/ RX4 (1999-2003); Scenic/ Grand Scenic II (2003-2009); Trafic II (2001-2011)
Nissan: Primastar X83 (2002-2011)
Vauxhall/ Opel: Vivaro (01-11)
Engine codes:
1.8 16V F4P: 720, 722, 760, 770, 771, 772, 773, 774, 775
2.0 16V F4R: 700, 701, 712, 713, 714, 715, 720, 722, 730, 732, 740, 741, 744, 746, 762, 763, 764, 765, 766, 767, 770, 771, 774, 776, 780, 784, 786, 787, 790, 792, 791, 792, 794, 795, 796, 797, 800, 802, 810, 811, 820, 830, 832, 867, 870, 874, 886, 887, 896, 897
OEM:
MOT 1801, MOT 1509/01 (Renault/ Nissan)
KM-6244 (Vauxhall/ Opel)
Made in China
Glow Plug Conncetor Plier(straight), 50838
Glow Plug Conncetor Plier(straight), 50838
Straight heads for direct access
Designed to remove hard to reach glow plugs connectors
Prevents damage
Soft grip handles with thumb restraints
Applicable:
Suitable for diesel engines for Audi, BMW, Mercedes-Benz, Volkswage
Made in China
Land Rover 2.0 2.5 KV6 Petrol Engine - Timing Set , 50804
Land Rover 2.0 2.5 KV6 Petrol Engine - Timing Set , 50804
Features:
For belt driven engines for Rover, for Land Rover and for MG.
This tool set includes all engine timing belt replacement tools for the 2.0 and 2.5 variants of the KV6 quad cam engine.
Contents: Camshaft locking arm tools; Rear Camshaft Sprocket tool, Rear Camshaft Sprocket Spreader plus: 2 Rear Sprocket guide pins, Tensioner Pin, Crankshaft locking pin, Crankshaft pulley locking tool
Applications:
Land Rover: Freelander (00-06)
MG: ZR (04-05), ZS (01-05), ZT/ZT-T (01-05)
(Will not work with MGZT / ZT-T 190)
Rover : 45 (99-05), 75 (99-05), 825 (96-99)
Engine codes : 2.0: KV6, 2.5: KV6
Made in China
VAG 62/66/72/85mm - Wheel Bearing Tool Set, 50763
VAG 62/66/72/85mm - Wheel Bearing Tool Set, 50763
For removing and installing 2nd generation hub and wheel bearings found on VAG vehicles.
Bearing size: 62mm, 66mm, 72mm and 85mm.
Features:
All tools in the kit are heat treated for strength and durability.
With this tool kit you can easily remove the bearings and other components.
These bearings are lightweight with a built-in flange.
They are also preloaded with a retaining bracelet that secures the bearing to the hub housing.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.
https://www.youtube.com/watch?v=pequSdvAJU0&feature=youtu.be
Application:
62mm: Audi A2, VW Lupo.
66mm: Skoda Fabia, VW Fox, Polo.
72mm: Audi A1, A2, Seat Ibiza, Skoda Fabia, Roomster, VW Polo, VW Fox.
85mm: VW Transporter (T5), Touareg, Multivan
Made in China
Diesel Engine Compression Tester Kit, 50762
Diesel Engine Compression Tester Kit, 50762
For cars, trucks and tractors
Included adapters for: GM, Ford, Lincoln, Mercedes Benz, Volvo, Audi, Volkswagen, Isuze, Toyota , CAT, Deere, Cummins and More
Includes all the necessary components to test diesel compression on most diesel fueled trucks, cars and tractors.
Carbon steel construction for long life
Chrome-plated gauge
Swivel-end quick-coupler allows quick and easy connection of adapters
0-1000 PSI/0-70 bar gauge with release valve and 368 mm (14.5”) long hose
1000 PSI maximum pressure
Hose Length: 368mm
Compatible with:
Ford/navistar 6.9/7.3 Liter Engine; Audi, Volvo, Vw, Cummins 5.9 Liter, M-b Cars & Trucks With 24 Mm Ports; V-185, 210, 225, 555, Vt-255, 555; Bacharach Adapter; M-b 18 Mm (prior To 1978); M-b 12 Mm (1978 And Up); Majority Of H-d Tractor Diesel Engines Including Allis Chalmers, Case, Deere, Ford, I. H., Mack, Onan, Waukesha; Cummins V-6, V-8, V-12 Bmw 2.4 Liter, Lincoln (mark-vii) 1984 & 1985, Peugeot 12 Mm/18mm; Chevy Luv 1.8/2.2 Liter, Isuzu 1.8/2.2 Liter, Toyota 1.8 Liter; G. M. 4.3/5.7/6.2/6.5 Liter (turbo); Detroit Diesel 53, 71, 92, 110, 149, V53, V71; Cat D-336, 1674, 1676, 3406, 3408, 3412 (capsule-type Nozzles); Case, Cat, Deere, Waukesha
Included 13 adapters:
Ford/Navistar 6.9/7.3 Liter engine Case, Cat, Deere, Waukesha Audi, Volvo, VW, Cummins 5.9 Liter, M-B Cars & Trucks With 24 MM Ports V-185, 210, 225, 555, VT-255, 555
Bacharach Adapter M-B 18 MM (Prior To 1978) M-B 12 MM (1978 & Up)
Majority Of H-D Tractor Diesel Engines Including Allis Chalmers, Case, Deere, Ford, I. H., Mack, Onan, Waukesha Cummins V-6, V-8, V-12 BMW 2.4 liter, Lincoln (Mark-VII) 1984 & 1985, Peugeot 12 MM/18MM
Chevy Luv 1.8/2.2 Liter, Isuzu 1.8/2.2 Liter, Toyota 1.8 Liter G. M. 4.3/5.7/6.2/6.5 Liter (Turbo)
Detroit Diesel 53, 71, 92, 110, 149, V53, V71 Cat D-336, 1674, 1676, 3406, 3408, 3412 (capsule type nozzles)
Made in China
VAG 1.8L & 2.0L TFSi/TSi - Crankshaft Pulley Holding Tool, 50739
VAG 1.8L & 2.0L TFSi/TSi - Crankshaft Pulley Holding Tool, 50739
Used for holding crankshaft pulley/vibration damper when crankshaft central bolt is loosened or tightened.
Specially shaped & hardened pins help prevent the tool falling out when under load.
Application:
1.8L & 2.0L TFSi/TSi petrol engines found in the VAG vehicles (from 2006 onwards).
Overall length 34" (863 mm)
OEM#: T10355
Made in China
Engine Oil Filling Funnel Set, 50731
Engine Oil Filling Funnel Set, 50731
2 litre funnel with 6 adaptors to fit a wide range of vehicles.
Allows for fast oil filling without spillage or waste.
Great for many late model vehicles with internal baffles.
For pouring oil where access is difficult.
Angled extension and adapters are made of plastic.
Contents:
1 pc 2 liter funnel.
1 pc angled plastic extension.
1 pc bayonet adapter for Audi, BMW, Dodge, Mercedes-Benz, Porsche, Volvo, VW.
1 pc threaded adapter M42x4.5 for Subaru.
1 pc threaded adapter M37x3.0 for Toyota, Lexus, Scion, Pontiac.
1 pc threaded adapter M35x4.0 for Mazda.
1 pc threaded adapter M32x3.5 for Dodge, Honda, Acura, Nissan, Jaguar, Ford.
1 pc bayonet adapter for Toyota and Lexus with 3.0/3.3L V6 engines
Made in China
7 pcs Glow Plug Puller Kit, 50646
7 pcs Glow Plug Puller Kit, 50646
Designed for extracting failed glow plugs.
Contents:
External grip (7.7mm internal Ø ) Includes size 4 (6.0mm) contraction collet.
External grip (6.8mm internal Ø ) Includes size 3 (5.0mm) contraction collet.
Contraction collet: Size 3 (5.0mm).
Contraction collet: Size 2 (3.6mm).
Contraction collet: Size 1 (2.7mm).
T -bar slide hammer/puller.
Internal (expansion collet) puller.
Made in China
Universal Valve Spring Install Remove Tool, 50610
Universal Valve Spring Install Remove Tool, 50610
To remove valve springs and valve stem seals on the vehicle without taking the head off!
Works great in narrow engine bays where space is tight. Huge time saver.
Suits European, American and Japanese cars. Such as Mercedes Benz, BMW, Volvo, Toyota, Mitsubishi, VW, Ford etc.
Especially suitable on BENZ V6 Engine and BMW V8 Engine.
May not work on some S63 engines due to the lower sitting engine.
This kit also caters to engines that require a 14mm spark plug socket (or M12 x 1.25p)
Engines:
Mercedes Benz: M102 / M103 / M104 / M111 / M112 / M113 / M271 / M272
BMW: N42 / N46 / N52 / M52 / M54 / M56 / N62
Toyota / Mitsubishi / VW / Audi, ect.
Just a few vehicles that have actually been tested with, this kit suits many more.
Made in China