ENGINE TIMING TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
BMW N47/N57 2.0, 3.0 - Chain Drive - Diesel Engine Setting/locking Kit, 50344A
Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A
Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.
Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)
Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0
OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760
Made in China
Mercedes-Benz 9G-Tronic Transmission - Oil Drain and Refill Set, 50569
Mercedes-Benz 9G-Tronic Transmission - Oil Drain and Refill Set, 50569
Designed for draining and refilling ATF on Mercedes-Benz 9-speed automatic transmissions (type 725.0)
Special design for leak-free and spill-free ATF services
Refill adapter shall be used with an ATF refill pump and tank
OEM №: 725 589 02 90 00, 725 589 00 90 00
Made in China
Renault/Nissan V6 3.0 DCi V9X - Engine timing tool set, 50549
Renault/Nissan V6 3.0 DCi V9X - Engine timing tool set, 50549
Applicable:
Renault: Renault Espace, Renault Vel Satis, Grand Espace 4, Renault Master
Nissan: Nissan INFINITY, Nissan Navara, Nissan Pathfinder (R51)
Engine:
Renault 3.0 DCI, Nissan / Infiniti - 3.0 D
Engine Code: V9X
Made in China
Crankshaft Turning Tool, 50535
Crankshaft Turning Tool, 50535
Used for turning the crankshaft pulley.
With 1/2" drive, 22mm square, and 12mm rotating pivot pin.
Application:
Audi A6 2005 and up
Audi A8 2003 and up
Engine: 6 cylinder 2.4, 3.2L FSI.
OEM №: T40058
Made in China
Fiat 1.4 12V - Engine Timing Tools, 50529
Fiat 1.4 12V - Engine Timing Tools, 50529
Designed specifically to allow the cam and crankshaft to be aligned when setting the engine timing on the 1.4L 12 valve petrol engines found across the Fiat and Lancia ranges from 1995 to 2000.
Designed specifically for the 1.4 12v engine.
Application:
Models:
Fiat 1.4 12v engine, Fiat Brava, Brao, Marea Weekend(95-00)
Lancia Ypsilon
Engine code: 1.4 12v - 182 A3.000, 182 A5.000
Contents:
Camshaft locking tool (OEM Ref 1 860 899 000)
Crankshaft timing tool (OEM Ref 1 860 901 000)
NOTE: The Camshaft locking tool will only fit the OEM camshaft found in the engines codes listed.
Made in China
VAG crankshaft Pulley/Damper Puller, 50506
VAG crankshaft Pulley/Damper Puller, 50506
This removal tool must always be used to separate the vibration damper from the gear wheel of the crankshaft. Working on 4 cylinder common 2.0L, required for the damage free removal of the vibration damper with internal thread.
Applications:
Volkswagen T6/Transporter (from 2017).
Engine: 4 cylinder common rail 2.0L.
OEM №: T50071.
Made in China
Motorcycle Chain Breaker and Riveting Tool, 50402
Motorcycle Chain Breaker and Riveting Tool, 50402
For Breaking / Pressing and Riveting Motorcycle Drive Chains - 520; 525; 530; 532
Tool can be secured using a vice or spanner
Contents 3; 4 and 5mm Pins
Made in China
Alfa Romeo Twin Spark Twin Cam Belt Drive - Petrol Engine Setting/Locking Kit, 50327
Alfa Romeo Twin Spark Twin Cam Belt Drive - Petrol Engine Setting/Locking Kit, 50327
For 1.4, 1.6, 1.8, 2.0 16v Twin Cam - Belt Drive
Contents:
Camshaft setting plates for locking the camshafts in the timed position. The plates are positioned in place of the camshaft bearing caps.
Timing and balance shaft belt tensioner adjusters.
Applicable:
Alfa Romeo Twin Spark:
1.4/1.6 Engines - 145/146/155/156 (96-01)
1.8 Engines - 145/146, (96-01), 155/156 (96-06),
Spider/GTV (98-01):
2.0 Engines - 145/146 (96-01), 147 (01-07), 155/156 (95-02), 166 (98-01)
Spider/GTV (96-03)
1.4/1.6 Engines - 145/146/155/156 (96-01),
1.8 Engines - 145/146, (96-01), 155/156 (96-06), Spider/GTV (98-01),
2.0 Engines - E145/146 (96-01), 147 01-07, 155/156 (95-02), 166 (98-01),
Spider/GTV (96-03)
Plate Applications:
Purple; 1.4, 1.6, Blue; 1.8, 2.0
OEM №: 1825041000, 1825042000, 1822154000, 1822149000
Engine code:
162.01, 321.04, 322.01, 322.05, 323.01, 323.10, 335.03, 372.03, 671.06, 672.04, 676.01
Made in China
64 Pcs Oil Drain Plug Thread Repair Set, 50324
64 Pcs Oil Drain Plug Thread Repair Set, 50324
Application:
For Repairing Sump, Gearbox Drain Plug Tool Set
A comprehensive thread repair kit ideal for repairing sump, gearbox and differential drain plug threads.Used to tap the damaged thread slightly over size, then fit a new drain plug and washer supplied.
Set is suitable for the most popular threads used on cars and light commercial vehicles.
Tap Sizes:
M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5mm
Taps material: Chrome Vanadium
Made in China
Fiat Alfa Romeo Lancia 0.9 Twin Air Chain Drive - Engine Timing Tool Set , 50294
Fiat Alfa Romeo Lancia 0.9 Twin Air Chain Drive - Engine Timing Tool Set , 50294
Designed to lock the cam and crankshaft in position to allow the removal and replacement of the timing chain fitted to the new low emission and high economy twin cylinder Fiat engine.
Note: Fiat state that after rebuild these engines should be placed on suitable electronic diagnostic software for the onboard electronic control systems to be reset.
Content:
Pulley Locking Pin
Flywheel Locking Pin
Camshaft Locking Plate
Balancing shaft adjustment tool
Applicable:
Alfa Romeo:MiTo(2012-2015)
Fiat: 500/500C(2010~), Panda(2012~), Punto(2012~)
Lancia: Ypsilon(2011~)
Engine code: 0.9 Twin Air Turbo: 312A2.000
OEM №: 2.000.035.300; 2.000.035.200; 2.000.035.100; 2.000.038.300
Made in China
Injector Nozzle Seat Cleaning Tool - Mercedes-Benz, 50277
Injector Nozzle Seat Cleaning Tool - Mercedes-Benz, 50277
Ideal for cleaning of the nozzle seat, the injector mounting hole and the small aperture leading to the combustion chamber.
Suitable for
Mercedes-Benz CDI engines OM611, OM612, OM613, OM639, OM640, OM642, OM646, OM647, OM648, OM651, OM668, Smart R660.
Also applicable to following engines:
PSA: 2.7 HDI / engine DT17, 3.0 HDI / engine DT20
Chrysler: 2.5 CRD / engine OM664
Toyota: 3.0 D-4D / engine 1 KD-FTV, 2.2 D-4D / engine 2 AD-FHV, 2 AD-FTV
Lexus: 2.2 diesel / engine 2 AD-FHV
Diameter: 7.5 / 17.0 / 19.1mm
Total length: 261mm
Made in China
Mercedes Benz Transmission Dipstick, 50237
Mercedes Benz Transmission Dipstick, 50237
Red
Length: 1220mm
For transmission oil with transmission code 722.6_L, G, P, V.
OEM#: W 140589152100;
Made in China
19 Pcs Oil Filter Wrench Set, 50174
19 Pcs Oil Filter Wrench Set, 50174
Fluted oil filter cup wrenches for the removal and installation of oil filters used in modern engine applications.
Suitable for use on popular petrol or diesel filters used in passenger, light commercial and heavy duty applications.
Fluted cup design allows for gripping on corrugated end of the filter, reducing the possibility of filter damage during removal and installation.
Features two of the popular Toyota sizes, for removing the plastic cartridge housing on most 4-cylinder and 6-cylinder applications.
Manufactured from high grade aluminium to eliminate shearing, wearing and breakage.
Content:
3/8 " Dr. - 64.5mm / 14-pt. (Lexus - Toyota)
3/8 " Dr. - 79mm / 15-pt (Toyota, Honda, Mitsubishi, Subaru, Mazda, Isuzu)
3/8 " Dr. - 79,5 mm / 14-pt (Lexus)
3/8 " Dr. - 84mm / 14-pt (Dodge Sprinter, Mercedes-Benz E320, Jeep Cherokee 3.0L V6 Common Rail
3/8 " Dr - 92 mm / 15-pt (Nissan, Subaru)
3/8 " Dr. - 94.5mm / 15-pt (Nissan, Toyota)
3/8 " Dr. - 100.5mm / 15-pt (Mazda, Mitsubishi)
1/2 " Dr. - 24mm / 6-pt (BMW 5, BMW 7, BMW X5 V8 (N62), Saturn, Astra 1.8L EcoTec, Chrysler 3.6L V6, 200, 300, T / C Dodge Jeep)
1/2 " Dr. - 27 мм / 6 флейти (Mercedes Benz A - E - C)
1/2 " Dr. - 30 мм / 6 канавки (Audi A2 - Volkswagen Polo - Lupo 1.4L / 1.6L)
1/2 " Dr. - 32,5 мм / 6 флейти (Vauxhall Astra G, Corsa B, Zafira, Audi, VW 1-36 мм, Vauxhall Omega, Vectra B, Zafira, BMW M43 / 60)
1/2 " Dr. - 36mm / 6-pt (Vauxhall Omega, Vectra B, Zafira, BMW M43 / 60, Mercedes-Benz Vito CDI, C, E, Volkswagen Lupo 1.2 TDI, MAN)
1/2 " Dr. - 38mm / 6-pt (Vauxhall Vectra 2.0D)
1/2 " Dr. - 63-64mm / 14-pt (Toyota)
1/2 " Dr. - 66,5 mm / 14-pt (Ford, Mazda)
1/2 " Dr. 74mm / 14-pt (Mercedes Benz)
1/2 " Dr. - 87 mm / 16-pt (BMW E46 3 Series, Volvo)
Adaptor 3/8"(F) x 1/2"(M)
Oil Filter Wrench Claw 55 - 90 mm
Made in China
VAG (4.0 TFSI) - Timing Tool Set, 50956
VAG (4.0 TFSI) - Timing Tool Set, 50956
Use for correct the camshaft and crankshaft timing position. Use to lock the camshaft in the timed position when the engine repair or the rebuild requiring the cam pulley to be removed and timed. For locking the camshaft in the position to allow the variable valve timing pulley to be removed.
The kit covers later duratec petrol engine, it includes revised design camshaft setting plate and tensioner pulley locking pin.
Contents:
Tensioner Pulley Locking Pin
Crankshaft Locking Tool
Camshaft Sprocket Locking Tool
Flywheel Timing Pin
Camshaft/Crankshaft Pin
Application:
Audi A8 2010>, Audi A6 2011>8-cyl. 4.0L, 4V TFSI engines.
OEM №: T40264
Made in China
Mercedes M177/M178 - Engine Timing Tools Set, 50912
Mercedes M177/M178 - Engine Timing Tools Set, 50912
Features:
To fix and align the camshaft in TDC position.
Applicable: BENZ AMG C63, C63S biturbo 4.0L, V8 petrol engine.
Applicable engine: M177, M178 from 2015.
OEM №: 177589014000, 177589001500
Made in China
Citroen/Peugeot/Toyota 1.0, 1.2 Petrol Engines - Crankshaft Holding Tool, 50911
Citroen/Peugeot/Toyota 1.0, 1.2 Petrol Engines - Crankshaft Holding Tool, 50911
Description:
Designed to counter-hold the crankshaft pulley to release and tighten the centre bolt.
Applicable: 1.0 and 1.2 Citroen, Peugeot Toyota and GM engines
Made in China