ENGINE TIMING TOOLS

Oil filter wrench, 096-3102A

Working range: 63 - 102 mm

Working with ratchet handle 3/8" DR. and 1/2" DR.

Made in Taiwan

Oil filter wrench, 209-0036

Working range: 63-102мм ( 2-1/2"-4") 

Working with ratchet handle 3/8" DR. and 1/2" DR.

Made in Taiwan

Petrol Engine Twin Camshaft Setting Locking Tool Kit VAG-VW, AUDI FSI, TFSI 1.4L, 1.6L, 780-8193

Application: use for VW 1.4, 1.6 FSI
chain-driven petrol engines
Models:
Audi: A3
Seat: Ibiza
Skoda: Octavia
VW: Golf, Jetta, Polo, Passat, Touran
Engine codes: AXU, BKG, BLN, BAG, BLF,
BLP, BTS
Made in Taiwan

Timing Belt Change Engine Tool Set for Fiat, Ford, Lancia 1.2 & 1.4 8V, 780-8141

Features:
For locking the camshaft and crankshaft in place while you change the timing belt and perform other repairs on Fiat engines.
Kit consists of crankshaft locking tool, camshaft setting plate and belt tensioner adjuster for the 1.2 engine, and additional sprocket locking tool and alignment fixture for the camshaft on the 1.4 VVT engine.

Applicable:
Facilitates changing of the timing belt and allows checking of the engine timing on following cars:
- Fiat: 500 (07-12), Doblo/Cargo (05-10),Grande Punto (07-12), Idea (04-12), Linea (07-11), Panda EVO2, Punto EVO (09-12).
- Lancia: Ypsilon (06-11), Musa (05-12).
- Ford: Ka (09-12).
Fits following engines mdodels:
- Fiat: 1.2/1.2 Dualogic, 169A4.000,188A4.000 (EVO2), 199A4.000 1.4/1.4 Bi-Fuel LPG / 1.4 Natural Power CNG,199A7.000, 350A1.000.
- Lancia: 1.4/1.4 Bi-Fuel LPG, 350A1.000.
- Ford: 1.2 Duratec, 169A4.000 (FP4).
Includes following tools:
- Crankshaft Locking Tool
  to be used as OEM 2.000.004.500 on Fiat/Lancia and OEM 303-1480 on Ford.
- Camshaft Setting Tool
 to be used as OEM 2.000.004.400 on Fiat/Lancia and OEM 303-1479 on Ford.
- Camshaft Sprocket Locking Tool
 to be used as OEM 2.000.004.200 on Fiat/Lancia and OEM 303-1477 on Ford.
- Camshaft Cover Aligner 
to be used as OEM 2.000.004.300 on Fiat/Lancia and OEM 303-1478 on Ford.
- Tensioner Adjuster
 to be used as OEM 1.860.987.000 on Fiat/Lancia.

Made in Taiwan

Engine Timing Tool Set BMW Mini, PSA 1.4 & 1.6, Citroen, Peugeot, 780-8162

Suitable for timing 1.4 & 1.6 Valvetronic direct injection petrol, chain drive engines, fitted in BMW Mini, Citroen and Peugeot vehicles.
Content:

• Camshaft Locking Tool - Inlet
• Camshaft Locking Tool - Exhaust
• Camshaft Alignment Clamp
• Crankshaft Setting Pin
• M6 Setscrews (4)
• Chain tensioner

Models:

• Mini One Coupe R56 (2006-2010)
• Mini Cooper Coupe R56 (2006-2010)
• Mini Cooper HB R55 (2007-2010)
• Citroën C4 (2008-2009)
• Citroën C4 Picasso (2008-2009)
• Peugeot 207 (2006-2010)
• Peugeot 207CC (2007-2010)
• Peugeot 308 (2001-2010)
• Peugeot 3008 (2009-2012)
• Peugeot 5008 (2009-2012)

 Engine Codes:

• N12
• N14
• EP3 (8FS)
• EP3C (8FR)
• EP6 (5FW)
• EP6C (5FS)
• EP6DT (5FT)
• EP6DT (5FX)
• EP6CDT (5FV)
• EP6DTS (5FY)

Code: 52046

Mede in Taiwan

Universal Clutch Alignment Tool, 318-K211

For easy alignment of single plate clutches. Also suitable for flywheels with no pilot bearing.
Additional Information
    For single plate clutches.
    Suitable for flywheels with or without pilot bearing.
    Fast to fit and remove.
    Universal applications.
    Size of collets: 14 mm - 28 mm across 3 adaptors. Cone size range from 35mm < 67mm.

Timing tool set - GM / Opel - 2.2L petrol engines, 780-8032

Features:
- To lock or position the camshaft and synchronize the chain tension during engine repair.
- When disassembling and installing the water pump. The latch of the water pump belt pulley is blocked by the retainer.
Also used for removal and installation of water pump. It is necessary to lock the water pump Also applicable to 2.4L engines.
Application:
Models:
Astra / Vectra (02-08)
Astra Vectra vx220 Zafira and Signum (00-04)
Engines: Z22SE
Engine Code: K9K, G9T, G9U.
OEM No: KM 6148 / KM 6077 / J-43651

Made in Taiwan
 

Engine timing tool set - VW; AUDI V6 3.2FSI, 741-0047A

Special Designed Set of Tools for Aligment Camshaft Locking and Adjusting.
With 1 Camshaft Adjusting Socket. VM# T40058.
With 2 Camshaft Stopping Pins. VM# T40071.
Applicable: VW, Audi A4/A6/ A8/ Q7/ R8 3.2, 4.2, 5.2 FSI with Engine AUK, A6L/ Quattro 2.4 with Engine BDW.

Made in Taiwan

CV Boot clamps pliers, 096-1407

• For all ear type clamps
• Application: for AUDI, BMW, CHRYSLER, FORD, GM, HONDA, MAZDA, MERCEDES, NISSAN, OPEL/VAUXHALL, VW etc.
• Designed : to use with extension handle or torque wrench
• Pliers remove and install newer-style flat band clamps used on various hose assemblies.

Valve spring compressor, 058-6231

• Designed to compress valve springs on overhead valve engines
• Unique, direct action compressor lever gives better visibility of valve spring retainers located in difficult access areas
• Jaw opening of  35 mm to 200 mm and throat clearance of 250 mm.

Made in China

3/8" Dr. Triangular Drain Plug socket for Renault, 777-XT10

Size: 10 mm

Applicable: Renault Megane

Material: Cr-V

Prodced in Taiwan

3/8" Dr.2 pc M10 Alternator tools, 2000-0504

1pc 3/8" Dr. Spline (XZN) socket bit M10x110mmL

1pc Reaction sorkscrew cap 33 teeth

Made in Taiwan

VW, AUDI Oil screw socket, 0089-016S

M16x38 mm
Works with 17 mm wrench
Special design for working in tight spaces
Application: VW , AUDI

Made in Taiwan

400 mm Spring compressor, 010-4200C

Professional tool for commercial or occasional use.
High quality set of compressors for working on struts on passenger cars and light comercials.
This listing is for one pair.
Suitable for use where there is limited space under the wheel arches.
1/2" square drive or 21mm spanner.

Made in Taiwan

Engine timing tool set - Reanult 2.2/2.5 dCi

Purpose:
For adjusting the camshaft of Renault Esapce2.2 DCI-Master 2.2 / 2.5DCI
Application:
- Renault: Laguna II, Espace, Master, Trafic, diesel engines 2.2 / 2.5 DCi
- Opel: Vivaro, Movano, diesel engines: 2.2 / 2.5 DTi, Astra B, Vectra B, Signum, Zafira, petrol engines 2.2 16V
Origin: Taiwan