ENGINE TIMING TOOLS

Oil filter wrench EN6316414

Applicable: TOYOTA, NISSAN

Made in Taiwan

8x10mm S-form Drain Plug Wrench, EN9U0706
S-form Drain Plug Wrench 8x10mm square
Made of chrome-vanadium steel.
Compatible with Peugeot, Renault and Volvo.
Suitable for back axle, gearbox.
Specifications:
Size: 8 - 10 mm (square)
Material: Cr-V

Made in Taiwan

Piston Ring Compressor 90-175mm, EN6206175

With Safety valve

Special spring steel
Ratchet type complete with hex spanner
Capacity: 90-175mm (3 1/2"-7")
Height: 165mm (6-1/2")

Made in Taiwan

Piston ring compressor, EN6203125

Lenght: 54-125mm

Made in Pard, Force

Piston ring compressor 90-175 mm, EN6204175

Capacity: 90-175 mm

Quick release button.

Made of good quality spring steel.

Operated by the 1/4"drive key (included)

BMW M40, M70 - Engine timing tool set, EN9G1212
Features:
This kit will service a wide range of older BMW both petrol belt & chain driven engines.
Used to align/lock camshaft in cylinder 1 TDC firing position duringchain removal & replacement.
2 pieces are recommended for V12 camshaft assembly (though not required.)
Content:
Camshaft alignment tool
Flywheel timing pin
Models:
BMW 3 Series (E36/E46): 316i (1993-2004), 316i Compact (1998-2001), 318i (1993-2001)
BMW 5 Series (E34): 518i (1994-1996)
BMW Z Series (E36): Z3 1.8 (1996-2003), Z3 1.9 (1996-2003)
Engine Codes:
1.6: M43; 16 4E 2, 16 4E 3
1.8: M43; 18 4E 2
1.9: M43; 19 4E 1
OEM №: 11.2.300, 11.3.190

Made in Taiwan

64.5mmx14-pt Oil Filter Cap Wrench For Toyota, EN631BО
Description:
Oil filter wrench provides maximum torque with multiple contact points and won't break or damage fragile Toyota plastic filter cartridges.
Designed for maximum torque
High strength forged alloy, Sand blasted non-slip finish
4. 24mm x 64.5 mm with 14-pt for a snug no-play, no-slip fit
Size 64.5mm - Number of flutes 14 - Drive - 3/8"
Material: aluminium black
Applicable:
Most of Toyota 4 Cylinder (1800CC - 2000CC)
Special designed for plastic oil filter cap of TOYOTA
Suitable for Toyota - Allion, Auris, Corolla axio, Corolla fielder, Corolla rumion,Isis ist, Noah, Premio, Prius, Voxy, Wish
Toyota:
2005-2008 Avalon
2009-2015 Corolla
1990-2015 Camry 4 cyl, V6 (2007-2008)
2001-2008 Highlander 4 cyl,V6 (2008)
2009-2015 Matrix
2007-2015 Prius
2010-2015 Rav4
2007-2014 Sienna
2007-2008 Tundra

Made in Taiwan

110-160mm Piston ring pliers, EN62302

Length: 190 mm

Capacity: 110-160

To replace segments without tearing or deformation.

Applicable to trucks.

It has a smooth fastening edge to prevent deformation.

Made in Taiwan

Overhead valve spring compressor, EN62109

Description:
This overhead valve spring compressor is ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompressing the tool then remove spring.
It features a reversible jaw / adaptor and automatic cam-action locking to a re-determined setting.
Specifications:
Easy to operate
Cam action level design for secure valve spring locking into the tool
Allow valve springs and valve stem oil seals to be replaced with the cylinder head
Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications
For use on a wide range of OHV, OHC and CHV engines.
Not suitable for use on engines with deep seated valves

Made in Taiwan

Chain oil filter wrench 1/2"Dr., EN61901

Suitable for removing oil filters up to 120mm in diameter, simply locate the chain around the oil filter and it tightens to fit the diameter.

This tool is designed to be used with a 1/2 drive ratchet or 21 mm spanner.

Made in Taiwan

Valve stem seal ring pliers, EN9G0102

Long neck designed to reach into confined area of the seal to grip it for removal
Gripping serration in the allow them to grasp both original equipment and aftermarket seals regardless of the configuration.

Made in Taiwan

Oil filter pliers 10", 6316090

Capacity: 60 - 90 mm

Prodused by Pard, Taiwan

Injection pump extractor tool, EN9G1501
1. This tool is specifically designed for holding the sprocket / chain in place when disassembling the VP44 injection pump and high pressure pump.
2. Common rail fitted to BMW engines:
318D / compact (E46), 320D /TD compact(46), 330D(E46),
525D(E39), 525D(E60/E61), 530D(E39), 530D(E60/E61),
535D(E60/E61), 730D(E38) ,X53.0D(E53)

Made inTaiwan

Engine timing tool VAG, 9G0807

Applicable:
- Audi ß A3, S3, A4, A6, TT
- VW - Beetle, Bora, Golf, Passat
- Seat - Ibiza, Cordoba, Leon, Toledo, Alhambra
- Skoda - Octavia

Made in Pard, Taiwan

53-118 mm Oil filter wrench, 63153118

Capacity: 53 - 118 mm.
Spring and cam locking mechanisms
Chrome-plated drop forged steel
Length: 230 mm
Produced by Pard, Taiwan