ENGINE TIMING TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
BMW N47/N57 2.0, 3.0 - Chain Drive - Diesel Engine Setting/locking Kit, 50344A
Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A
Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.
Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)
Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0
OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760
Made in China
BMW M41,M51,M47 TU-M47 TU/T2,M57/TU/T2:2.0L/3.0L Diesel engine timing tool set, 50374
Diesel engine timing tool set - BMW M41,M51,M47 TU-M47 TU/T2,M57/TU/T2:2.0L/3.0L, 50374
Features:
For removal and instaling the camshaft/ hydraulic chain tensioner.
Check and synchronize the camshaft.
Application: BMW - M41, M51, M47, M47TU/T2, M57TU/T2 engines and Land Rover-Range Rover, Freelander
Contents:
OEM No. 11 6 320 - Locking Tool for Camshaft (M47/57) 4 Cylinder (M47), 6 Cylinder Diesel Engine (M57) engine series E46 (318d, 320d, 330d) and E39 (525d, 530d)
OEM No. 11 6 322 - Locking Tool for Camshaft
OEM No. 11 3 340 - Retaining Pin for Tensioner-4 Cylinder Diesel Engine (M41), 6 Cylinder Diesel Engine 2.5 (M51), and also for Opel/Vaux-hall Omega 2.5TD
OEM No. 11 2 300 - Locking Pin (Ø11.8/Ø8) - M21, M40, M41, M42, M43, M43TU, M44, M47, M47TU, M50, M51, M52, M52TU, M54, M60, M62, M70, M73, S50B30, S50B32, S54,S62
OEM No. 11 3 320 - Camshaft Alignment Tool – Diesel - 4 Cylinder Diesel Engine M41 in E36 (318TDS), 6 Cylinder Diesel Engine M51 in E36 (328TD/TDS, E34/E39 (525TD/TDS)
Opel: Omega 2.5TD
OEM No. 11 3 360 – Reaction wrench
OEM No. 11 6 080 - Timing Pin (Ø8/Ø8.2, L- 36mm) - M47T2 Engine
OEM No. 11 5 180 - Timing Pin (Ø8/Ø8.2, L- 30 mm) - M47T2 Engine
OEM No. 13 5 190 - Injection Pump Extractor - M47 Engine
OEM No. 13 5 120 - Puller for Injection Pump - 4 Cylinder Diesel Engine (M41), 6 Cylinder Diesel Engine - 2.5 (M51), and also for Opel/Vauxhall Omega 2.5TD
OEM No. 13 5 191 - Injection Pump Extractor
M47, M47T2, M47TU, M57, M57TU Engine on BMW 318D, 320D(E46)1988-2005 and 318TD, 320TD, 525D, 530D, 530,535 (E60-E61) 2000-2006
OEM No. 13 5 192 - Injection Pump Shaft ...
Injector puller set for VAG (Audi / Seat / Skoda / VW), 50363
Injector puller set for VAG (Audi / Seat / Skoda / VW), 50363
Features: Designed to extraction, installation and service for FSI injectors and most diesel engines installed in VW, Audi, Seat, Skoda.
Material: CR-Mo and S45C steel
Applicable: FSI petrol engine 1.4, 1.6, 1.8, 2.0, 2.7 V6; 3.0 V6; 3.2 V6; 3.6 V6 и 4.2 V8 ...
Alternator pulley socket, 50355C
Alternator pulley socket, 50355C
Used for removal and installation poly-V-belt pulley with freewheel at the alternator.
Application: VW Golf, Vento, Passat, Audi A3, Volvo and etc.
33 teeth nut, outside diameter 19.5mm.
Drive: hexagon 17mm.
Total length: 30 mm.
10 pcs Diesel fuel engine timing set, 50333
10 pcs Diesel fuel engine timing set, 50333
This precision measuring instrument is designed for resetting the timing position on diesel engines with the following fuel pumps: BOSCH/EP/ VE ROTORY, KIKKI, NIPPON, DENSO, CAV ROTODIESEL
Top entry these fuel pumps will be found on the following vehicles with diesel engines:
Alfa Romeo, Audi, BMW, Daihatsu, Fiat, Ford, Suzuki, Iveco, Lancia, Land Rover, Mazda, Mitsubishi, Nissan, Renault, Rover, Vauxhall, VW etc.
Made in China
BMW M42/M44/M50/M52/M54/M56 Engine Timing Tool Set, 50331
Engine Timing Tool Set For BMW M42/M44/M50/M52/M54/M56, 50331
Features:
Installation, removal and timing of the variable camshaft timing unit. Checking and adjusting of the camshaft timing/belt changing.
Easily accessible operates the instruction, including the cross reference to the original part number.
Spare part is optionally available. Clear the arrangement of tool in high quality plastic case with the soft foam insertion.
A. VANOS Unit Engagement Wrench - OEM No. 11 5 490
B. Twin VANOS Setting Tool - OEM No. 11 6 180
C. Timing Adjustment Plate - OEM No. 11 9 110
D. Compressed Air Connector - OEM No. 11 3 450
E. Sprocket/Chain Assembly Fixture - OEM No. 11 6 150
F. Tensioner Pin(M50) - OEM No. 11 3 291
G. Camshaft Setting Plate - OEM No. 11 3 240
H. Camshaft Timing Tool - OEM No. 11 3 190
I. Flywheel Locking Pin - OEM No. 11 2 300
J. Tensioner Locking Tool - OEM No. 11 3 292
K. Pre-load Tool - OEM No. 11 3 390; OEM No. 11 4 220 ...
Ford Duratorq – chain drive Timing tool set, 50325
Timing tool set for Ford Duratorq – chain drive, 50325
Set contains camshaft, flywheel, injection pump & tensioner locking pins plus removal & installing tools for the injection pump sprocket retaining & access cover plate set.
2.0 & 2.4 Litre Dutotorq & 3.2 Litre BT50 / Ranger (Puma Engines) & Some Landrover.
Application:
Models: Ford: Mondeo 2.0L, 2.2L, 2.4L TDdi / TDci (01-07), Transit 2.0L, 2.2L, 2.4L TDDi / TDCi (00-08)
Engines: ABFA, D3FA, F3FA, D5BA, D6BA, FMBA, FMBB, FIFA, HJBA, HJBB, HJBC, HJBE, N7BA, N7BB, SDBA, QJBA, QJBB, QJBC, QJBD, QJBS, D2FA, D4FA, D0FA, F4FA, FXFA, H9FA, H9FB, JXFA, PHFA, ZSD424ALSO
Suited to Jaguar X-Type 2.0L | 2.2L D (03-08) fitted with FMBA, FMBB, QJBA, & LDV Convoy 2.4L TD / TDi (02-06) fitted with ZSD424 engines
4 pcs Diesel injector socket set, 50322
4 pcs Diesel injector socket set, 50322
Special socket for removing and installing of diesel injectors.
Set contains:
1 pc 1/2" Dr. x 22mm(6 point ), 110mm long.
1 pc 1/2" Dr. x 22mm(12 point ), 80mm long.
1 pc 1/2" Dr. x 27mm(12 point ), 80mm long.
1 pc 1/2" Dr. x 28mm(12 point ), 78mm long...
Clutch Alignment Tool Universal, 50840
Clutch Alignment Tool Universal, 50840
For easy alignment of single plate clutches. Also suitable for flywheels with no pilot bearing.
Additional Information
For single plate clutches.
Suitable for flywheels with or without pilot bearing.
Fast to fit and remove.
Universal applications.
Size of collets: 14 mm - 28 mm across 3 adaptors. Cone size range from 35mm < 67mm.
BMW N47; N47S; N57 Engine Timing tool kit, 50070
Engine Timing tool kit - BMW N47; N47S; N57, 50070
Suitable for setting the camshaft in diesel engines with chain drive. For turbocharged BMW 4 & 8 cylinder diesel engines with the motor identification letters N47, N47S, N57 or N57S.
Set includes:
Crankshaft lathe – OEM No. 116480
Camshaft locking – OEM No. 118750
Camshaft lock OEM 118760
Sprocket Puller OEM 118740/118741
Crankshaft wheel locking pin OEM 115320
Crankshaft holding tool OEM 114320
Crankshaft locking tool OEM 118790
2 x piece pin to lock the chain tensioner OEM 113340
Applicable :
For BMW
Series 1: 116d 118d 120d 123d (E81, E82, E87, E88, F20)
Series 3: 316d 318d 320d 325d 330d (E90, E91, E92, E93, F30)
Series 5: 520d 525d 530d 530d 535d 535d GT GT M550d (E60, E61, F07, F10, F11)
Series 6: 640d (F12)
Series 7: 730d 740d 750D (F01)
Series X1: 1.8d, 2.0d, 2.3d, (E84)
Series X3: 1.8d, 2.0d, 3.0d, 3.5D (F25, E83)
Series X5: 3.0d, 4.0d, M5.0d, (E70)
Series X6: 3.0d ; 4.0d; M5.0d, (E71)
Engine Codes:
2.0 N47 and N47S (2007-2015)
Made in China
BMW Vanos Sprocket turning wrench for M50 and M52 engines, 50053
BMW Vanos Sprocket turning wrench for M50 and M52 engines, 50053
Features: Used to adjust Vanos position on the BMW M50 and M52 engines.
Applicable: BMW E36 320i; E34 520i; E36 325i; E34 525i; E46 328i;
Engine codes: M50B20, M50B25, M52B28, S50B30US, S52B32
OEM No.: 115490
Made in China
Audi Oil Dipstick, 50931B
Audi Oil Dipstick, 50931B
Designed to measure the engine oil levels on Audi vehicles fitted with electronic oil level systems.
Designed to measure the engine oil levels on Audi vehicles fitted with electronic oil level systems.
Can also be used to calibrate the driver's instrument panel.
Application: Audi 2.0 TFSI, 3.2 FSI, 3.0 Supercharged, 4.2 FSI, 2.0 TDI CR.
Made in China
BMW N47/N47S and N57 Pump Removal Tool, 50880
Pump Removal Tool BMW N47/N47S and N57, 50880
Used to remove fuel pump.
Suitable for BMW N47/N47S, N57 engines.
OEM No. 118740
Made in China
Mercedes M133 / M270 / M274 Engine Timing Tool Set, 50858
Engine Timing Tool Set-Mercedes M133 / M270 / M274, 50858
Designed for disassembling and assembling of the camshafts on vehicles fitted with the chain driven 1.6/2.0 direct injection petrol engine.
Content:
Camshaft clamping assembly (chain end) + fixing bolts (OEM 270589006100)
Camshaft clamping assembly (gearbox end) + fixing bolts (OEM 270589006100)
Small diameter camshaft blocks (OEM 270589006100)
Special Star socket bit T100 for the camshaft pulleys (OEM: 270589006100)
Application:
Mercedes-Benz M133, M270, M274.
These engines are found in the late A Class, B Class CLA, C Class and E Class vehicles.
Models:
Mercedes A-Class 176 1.6/2.0 (since 2012)
Mercedes B-Class 242/246 1.6/2.0 (since 2012)
Mercedes CLA 117 1.6/2.0 (since 2012)
Mercedes C-Class 204 1.6/2.0 (since 2011)
Mercedes C-Class COUPÉ 1.6/2.0 (since 2011)
Mercedes E-Class 212 1.6/2.0 (since 2011)
Engine Codes: M133; M270; M274
Made in China
Renault/Nissan & Vauxhall/Opel 2.0/2.3 DCi/CDTi-M9R/M9T – Chain drive Engine Timing Tool, 50828
Engine Timing Tool - Renault/Nissan & Vauxhall/Opel 2.0/2.3 DCi/CDTi-M9R/M9T – Chain drive, 50828
Timing Setting and Locking Tool Kit for 2.0/2.3 DCi/CDTi Chain Drive Engines. Fitted for Nissan, Renault and for Vauxhall /Opel Vehicles, with M9R & M9T Engine Codes
To keep Camshaft, Injection Pump Shaft, Crankshaft in a Specific Position when changing a Timing Belt, or during other Engine Repairs and to Remove and Replace the Injection Pump.
OEM Tools: MOT1766, M0T1769, MOT1770, MOT1773, EN-48330, EN-48332, EN-48334, EN-48831, KM-6130
Application:
Renault:
Espace/Grand Espace IV (06-10), Kaleos (08-11),
Laguna ll (05-07), Laguna lll (07-12), Master lll (10-12),
Magane ll (06-10), Scenic/Grand Scenic ll (06-09),
Scenic/Grand Scenic lll (09-12), Trafic ll (06-12), Vel Satis (05-10), Nissan: Primastar X83 (06-10), Qashqai/Qashqai+2 J10 (07-10),
X-Trail T31 (07-12);
Vauxhall/Opel: Movano-B (10-12), Vivaro (06-12)
Engine code:
M9R 2.0dCi: 610, 615, 630, 700, 721, 740, 742, 760, 761, 762, 763, 780, 782, 784, 786, 788, 800, 802, 803, 805, 808, 816, 830, 832, 833;
M9T 2.3dCi: 670, 672, 676, 678, 680, 686, 690, 692, 694, 698
Made in: China
FIAT 1.3 JTD Engine timing tool set, 50824
Engine timing tool set – FIAT 1.3 JTD, 50824
Applications:
Alfa Romeo
MiTo / Fiat: 500, Albea (TR), Doblo/Cargo, Fiorino, Grande Punto, Idea, Linea, Panda, Puntı, Punto Evo
Ford: Ka Lancia: Musa, Ypsilon
Suzuki: Splash, Swift, Wagon R+ Ignes
Vauxhall Opel: Agila, Agila B, Astra-H, Astra-J, Combo-C, Corsa-C, Corsa-D, Meriva-A, Meriva-B, Tigra-B
Made in China
