ENGINE TIMING TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
BMW N47/N57 2.0, 3.0 - Chain Drive - Diesel Engine Setting/locking Kit, 50344A
Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A
Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.
Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)
Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0
OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760
Made in China
Ford - Torque Multiplier Set, 51201
Ford - Torque Multiplier Set, 51201
Features: To remove and install the crankshaft pulley bolt, in order to replace the timing belt.
Suitable for Ford 1.0 Ecoboost, 1.0 / 1.1 Duratec, 2.0 EcoBlue and 2.0 Duratorq-TDCi engine.
Max. torque input: 300Nm.
Max. torque output: 1500Nm.
Gear ratio: 1:5.
Input drive: 1/2".
Output drive: 3/4".
Applicable:
Ford B-MAX, C-MAX, EcoSport, Fiesta, Focus, Mondeo, Grand Tourneo Connect, Tourneo Connect, Transit Connect, Transit Courier
OEM# tools: 303-1611, 303-1611-01, 303-1611-02.
Made in China
Jaguar, Land Rover 2.0 - Diesel Engine Timing Tool, 50558
Jaguar, Land Rover 2.0 - Diesel Engine Timing Tool, 50558
Application: on Jaguar F PACE, XE, XF (2015 Onwards). Land Rover, Discovery Sport, Range Rover Evoque(2015 Onwards).
Engine codes: AJ-200D, 204DT, AJ200D, AJ200, 204DTD.
OEM# 303-1625, 303-1631, 303-1630, 303-1627
Made in China
24 pcs Pneumatic Injector Puller Set, 51247
24 pcs Pneumatic Injector Puller Set, 51247
Pneumatic injector extractor kit. Includes extractor and several adapters, compatible with a wide variety of injectors.
Through the use of pneumatic force, it allows extracting the injectors without the use of inertia hammers or mechanical extractors.
Kit comes with an air powered tool uses vibrations and 20-30Nm torque, which removes tight and seized injectors.
Have a 3pcs puller hooks ( open 12mm/13.5mm/16mm), for pull out the injectors with a relatively deep position, makes it easier to pull ou
Technical specifications:
Type:Air Vibration Injector
Material: Steel
Input pressure :72 - 116 psi / 5-8 bar
Adapters M20x1.0, M18x0.75, M17x1.0
Adapters M8x1.25, M8x1.0, M8x1.5
Adapters M14x1.5, M16x1.5, M18x1.5, M20x1.5, M22x1.
Adapters M25x0.5, M25x1.0,
Adapters M26x0.75, M29x1.0, M31x0.75
Adapters M27x0.75, M27x1.0
Set Includes:
1x air vibration tool
1x air hose
1x air plug
19x adapters
3x puller hooks
Made in China
VAG 2.7 / 3.0 / 4.0 / 4.2 TDI - Engine Timing Tool Set, 51190
VAG 2.7 / 3.0 / 4.0 / 4.2 TDI - Engine Timing Tool Set, 51190
Features: Used to work on timing chain, cylinder head, HP pump and engine timing applications on VAG 2.7 / 3.0 TDI V6 and 4.0 / 4.2 TDI V8 common rail diesel engines.
Set includes:
High pressure pump sprocket remover
Crankshaft turning tool - type 2
Camshaft sprocket holding tool
Camshaft alignment/ locking tool
Timing chain tensioner locking pin (2pcs)
Cam belt tensioner locking pin
Crankshaft pulley bolt adaptor
Crankshaft locking pin (4.2 TDi)
Crankshaft TDC locking screw
High pressure pump locking pin
Injection pump/ camshaft locking pin
High pressure fuel pump locking tool
Camshaft locking pins (2pcs)
Chain tensioner mounting bracket
Applicablе:
Compatible for Audi: A4 (05-16), A5 (07-16),
A5 Sportback (11-17),
A6 (04-18), A6 Allroad (06-18),
A7 (10-18), A8 (03-14),
Q5 (08-17), Q7 (06-15), SQ5 (13-15)
Compatible for VW: Phaeton (04-14), Touareg (05-14)
Engine codes:
2.7 TDI V6: BBP, BSG, CAMA, CAMB, CANA, CANC, CAND, CGKA, CGKB
3.0 TDI V6: ASB, BKN, BKS, BMK, BNG, BUG, BUN, BWA, BWE, BWJ, BWT, BYD, BYK, BZC, CAPA, CARA, CASA, CASB, CASC, CASD, CATA, CCLA, CCMA, CCWA, CCWB, CDLA, CDLB, CDLC, CDLD, CDLF, CDMA, CDTA, CDTB, CDUC, CDYA, CDYB, CDYC, CEXA, CGQB, CJGA, CJGC, CJGD, CJMA, CKVB, CKVC, CLAA, CLAB, CLZB, CNRB, CPNB, CRCA, CRTD, CRTE, CRTF, CTBA, CTBC, CTBB, CTCC
4.0 TDI V8: ASE
4.2 TDI V8: BTB, BVN, CCFA, CCFC, CDSB, CKDA
OEM#: T40049, T40058, T40060, T40061, T40062, T40064, T40071, T40135, T40237, T40245, T40246, 3242, 3359.
Made in China
Camshaft Adjustment tool set - VAG 3.0 / 2.9 TFSI (EA839), 51063
Camshaft Adjustment tool set - VAG 3.0 / 2.9 TFSI (EA839), 51063
Designed for removal and installation of the central valve on the camshaft adjuster.
Suitable for VAG 6-cilynder 3.0/2.9 4-valve TFSI (EA839) petrol engines.
Application:
VW: Touareg III (2018-)
Audi: A6 (2019-); A7 (2018-); Q7 (2019-); Q8 (2019-); S4 (2016-); S5 (2016-); SQ5 (2017-); RS4 (2017-); RS5 (2017-)
Engine codes: CWGD, DECA, CZSA, CZSE, DLZA, DCBD, DCBE.
OEM No. T90000; T90001; T90002
Made in China
24 PCS Engine Oil Filler Set, 51042
24 PCS Engine Oil Filler Set, 51042
2 litre funnel with 6 adaptors to fit a wide range of vehicles.
Allows for fast oil filling without spillage or waste.
Great for many late model vehicles with internal baffles.
For pouring oil where access is difficult.
Angled extension and adapters are made of plastic.
Contents:
1x Bayonet Adapter for Audi, BMW, Mercedes-Benz, Porsche, Volvo, Volkswagen
1x Bayonet Adapter for Toyota, Lexus 3.0 / 3.3 V6
1x Threaded Adapter M37x3.0 for Lexus, Toyota, Scion, Pontiac Vibe
1x Threaded Adapter M35x4.0 for Ford, Jaguar, Land Rover, Mazda
1x Threaded Adapter M32x3.5 for Acura, Dodge, Ford, Honda, Jaguar, Jeep, Land Rover, Mazda, Nissan
1x Threaded Adapter M42x4.5 for Subaru
1x Threaded Adapter M30x3.0 for Dodge, Mitsubishi, Jeep
1x Bayonet Adapter for Ford, Mazda, Land Rover
1x Bayonet Adapter for Ford, Hyundai, Jaguar, Volvo, Mazda, Volvo
1x Bayonet Adapter for Volkswagen, Audi, Seat, Skoda
1x Bayonet Adapter for Dodge 5.7 / 6.1 / 6.4 Hemi, 3.6
1x Threaded Adapter M37x3.0 for Lexus, Toyota, Scion, Pontiac Vibe
1x Bayonet Adapter for Citroën C4 2.0, Peugeot 408
1x Bayonet Adapter for Mitsubishi Pajero V73, Volvo S80
1x Bayonet Adapter for Citroën C2 1.6L, C3 XR, C4 1.6, Peugeot 307, 206
1x Bayonet Adapter for Buick New Regal and Cadillac CTS 2.7
1x Bayonet Adapter for Buick Excelle
1x Bayonet Adapter for Volvo XC90, S80
1x Bayonet Adapter for Buick Sail 1.4, 1.6, 2.0
1x Universal Adapter
1x Oil Funnel 2L
1x Elbow
1x Angled Plastic Extension
1x Drain Fitting with Pressure Reducer
Made in China
20 PCS Oil Sump Drain Plug Key Set, 20019B
20 PCS Oil Sump Drain Plug Key Set, 20019B
Suitable for sump plugs on engine, gearbox and back axle.
Contents:
Square Male Keys: 7, 8, 10, 11, 12,13, 14mm and 5/16"
Hex Keys: 8, 9, 10, 12, 14, 17mm
Square Female: 10mm
Triangular Key: 10mm PSA
Security Spline Key: M16
VAG Plastic Plug Bit
VAG Torx T45
Flexible Head Bar 200mm
Made in China
1/2” Dr. E20 Cylinder Head Wrench-Man, 50811
1/2” Dr. E20 Cylinder Head Wrench-Man, 50811
Features: For loosening and fastening cylinder head screws. Removing the injector no longer necessarily.
Ideally suited for commercial vehicles.
Profil: E-Torx.
Drive: Square, 1/2".
Applicable: MAN series F2000 / F90 / F8, MAN buses with D25 and D28 engines.
Made in China
24mm Oil Filter Wrench For DSG Gear Oil Change, 50845
24mm Oil Filter Wrench For DSG Gear Oil Change, 50845
Features: For operation of the oil filter housing cover when changing the oil filter insert on the DSG gearbox.
Applicable: VW and VAG group vehicles.
No removal of batteries or battery holders.
VW specification: DSG oil change within the inspection interval.
Drive: Square, 1/2".
Output: Outside 12-point profile.
Wrench size: 24mm.
Length: 199 mm.
Made in China
Mercedes-Benz OM654 - Engine Timing Tool Set, 51106
Mercedes-Benz OM654 - Engine Timing Tool Set, 51106
Applicable: A Class (from 2019), B Class (from 2019), C Class (from 2018), CLA (from 2019), CLS (from 2018), E Class (from 2016), GLB (from 2019), GLC Coupe (from 2019), GLE (from 2019), V Class (from 2019) and Vito (from 2019).
Engine codes: 1.6L 654.916 and 2.0L 654.920.
OEM No.: W654 589 00 40 00, W654 589 01 40 00 and W654 589 00 21 00.
Made in China
10 pcs Motorcycle Flywheel Puller Set, 60023
10 pcs Motorcycle Flywheel Puller Set, 60023
A set of flywheel pullers used for separating the flywheel from the crankshaft taper.
Contents:
5 double ended pullers with sizes:
M28 x M26 (1.0 mm thread),
M25 (1.25 mm) x M22 (1.0 mm),
M27 x M24 (LH) (1.0 mm),
M26 x M22 (1.5 mm),
M27 (1.25 mm) x M20 (1.0 mm)
2 single ended puller:
M28 x 1.5 mm,
M19 x 1.0 mm
Threaded bolts: M14 x 1.5 mm, M16 x 1.5 mm, M18 x 1.5 mm
Made in China
Ford 2.0 EcoBlue TDCi - Crankshaft Pulley Puller, 51118
Ford 2.0 EcoBlue TDCi - Crankshaft Pulley Puller, 51118
Designed to remove the crankshaft pulley when accessing to the timing belt.
Suitable for Ford 2.0 EcoBlue TDCi diesel engines from 2016.
Applications: Ford Edge, Focus, Focus Active, Galaxy, Kuga, Mondeo, S-MAX, Transit, Transit Custom, Tourneo Custom.
Engine codes: BCCA, BCCB, BCCC, YLCA, YLCB, YLCC, YLDA, YLDC, YLF6, YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMF6, YMFA, YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6, YNRA.
OEM#: 204-158-01, 205-295
Made in China
Glow Plug Electrode Removal Tool Set M8 / M10, 51031
Glow Plug Electrode Removal Tool Set M8 / M10, 51031
Features: Designed for removing broken glow plug electrodes.
Suitable for glow plug M8x1.0, M10x1.0, M10x1.25.
Contains:
2 pcs Tap: M3x0.5, M4x0.7
2 pcs Drill: 2.5x120mm, 3.3x140mm
2 pcs Thread Rod: M4x0.7x175mm
1 pcs Thread Rod: M3x0.5x175mm
3 pcs Extraction Nut
3 pcs Extraction Adaptor: M8x1.0, M10x1.0, M10x1.25
3 pcs Guide bolt: M8x1
3 pcs Guide bolt: M10x1.0
3 pcs Guide bolt: M10x1.25
Made in China
VAG DSG 0AM - Assembly Lever and Guide Pins, 50796
VAG DSG 0AM - Assembly Lever and Guide Pins, 50796
Features: Used to operate the engaging lever when removing and installing the mechatronic unit on 7-speed dual clutch gearbox DSG 0AM.
The guide pins ensure straight mounting of the mechatronic unit.
Applications:
Audi: A1 (2010-2018), A3 (2003-2012), TT (2006-2015)
Seat: Altea (2004-2015), Ibiza (2008-2017), Leon (2005-2012), Toledo (2004-2009)
Skoda: Fabia (2007-2014), Octavia (2004-2013), Rapid (2012-2020), Roomster (2006-2015), Superb (2008-2015), Yeti (2009-2017)
Volkswagen: Caddy (2004-2020), Golf Plus (2005-2014), Golf V (2003-2009), Golf VI (2008-2012), Jetta III (2005-2011), Jetta IV (2011-), New Beetle (2011-2019), Passat (2005-2010), Passat (2010-2014), Polo (2009-2017), Scirocco (2008-2014), Touran (2003-2010), Touran (2010-2015)
OEM#: T10407, T10406
Made in China
Mercedes-Benz Ignition Lock Removal Tool, 50765
Mercedes-Benz Ignition Lock Removal Tool, 50765
Features: Designed to remove and replace ignition switch trim ring.
Applicable: Mercedes-Benz W129, W140, W202, W210, W220, W203, W209, W211, W204
Made in China
